Nagibna zračna blazina miza

Hegla Hegla Kipptisch

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Popolnoma avtomatski CNC rezalni center CAT500 Stroj je delujoč in pripravljen za uporabo premer rezila: 500 mm koti rezanja: -45°/90°/+45° Lhsdpfx Aox Ez Igodkjd operaterska konzola z Windows smer dela z desne na levo odsesavanje ostružkov transporter za odpadke tiskalnik etiket

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, • Debelina stekla (mm): do 30 • Višina stekla (mm): do 2000 Lodpfsxgtqgsx Adkshd • Čistilne krtače: 4 spredaj in 4 zadaj

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 2-component extruder HDT HD Pro 6 Easy SI Year of manufacture: 2008 (overhauled in 2019) Silicone Hydraulic In very good and clean condition Lhodpfx Aewngagedked As is Immediately available

Stanje: dober (rabljeno), Leto izdelave: 2005, URBAN welding and cleaning line type CC 16/43-26/23, consisting of AKS 1600 welding machine and SV 430 cleaning unit. Lhjdpfx Adovyqbmeked

Stanje: rabljeno, • Load capacity: 350 kg • 6 suction pads, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction pads with guide tube and electric trolley • 4 units available, new and unused • Available immediately IV: + Design Standards 1. The construction of the system strictly complies with the European CE standard EN13155:2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVVI8 standard, with the key design parameters exceeding those required by the above standards. 2. Safety factor: The main structure features a safety factor of 4.0; the vacuum safety level is 65%, with the standard at 85%, which is 20% above the minimum safety standard. V+ Equipment Testing and Standards 1. General requirements Whether all materials are complete, whether the equipment’s exterior is painted or scratched, whether any suction pads or tubes are damaged. 2. Items tested before leaving the factory © Equipment suction test © Pressure retention test Ledoxnvq Ejpfx Adkshd © Alarm function test © Various control components • Price on request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.000 mm, skupna širina: 800 mm, skupna višina: 1.000 mm, vhodna napetost: 400 V, skupna masa: 850 kg, vrsta vhodnega toka: trifazni, Ročni Lisec-Butylextruder LBH-25V, letnik 2002, popolnoma prenovljen (tehnično in vizualno), za širine profilov od 6–24 mm, 2 butilna rezervoarja po 7,5 kg butila. Stroj bo na voljo konec februarja/začetek marca 2026. Prosimo, upoštevajte: fotografije prikazujejo enak tip ekstruderja po naši zadnji obnovi. Lhjdpfx Adjydc Nnskjd

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Hydro 3000.6 Vertical glass washing machine with pre-wash zone, main washing zone, and drying zone. Wet zone is largely made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Including water tanks for water treatment. Including fan for glass drying. Outfeed zone with inspection lamps. Processing dimensions: Max. glass height: 3,000 mm Glass thickness: 3–22 mm Brushes: 6 units Connected load: 22 kW Lodpfxewd N Ure Adkjhd

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Lhjdpfxewwlk Ne Adked

Stanje: dober (rabljeno), Straight edge grinding machine; for grinding and fine-polishing straight edges, mitres, and bevels Specifications: • Glass thickness: 3–25 mm • Minimum dimensions: 80 x 120 mm • Maximum dimensions: 3 x 3 meters Ljdou U H H Aspfx Adkshd • Mitre angles: 0–60° • Power: 15 kW • Dimensions: Length 6.5 meters • Width with water tank: 1.6 meters • Height: 2.5 meters • Feed speed: 0.4–4.2 m/min • Weight: 2,600 kg Price on request

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.500 mm, skupna dolžina: 11.500 mm, skupna širina: 3.800 mm, Soenen Hendrik DEM 3 machining center, year of manufacture 2003-2004, equipped with tools for milling water drainage slots and ventilation openings in PVC profiles, including screwing and drilling the handle insert in steel. The machine consists of a loading table with a magazine for 12 profiles, a processing unit, and an unloading table with a magazine for 12 profiles. The machine is in good condition; we have dismantled it and it is currently in our warehouse. Before dismantling, we made a video of the system, which you can view. The machine is programmed for Kömmerling 76mm AD and MD profiles. Other profiles can be programmed on request. The price includes dismantling and loading onto the truck. Lhedpfx Adjrztl Sekjd