Univerzalni preizkuševalni stroj / Natezni preizkuševalni stroj

Hegewald & Peschke Inspekt Table Blur 5

Universal Testing Machine Inspekt Table Blue 5kN

Mechanical Design:
Bedpjyyu I Nsfx Agtslg

- 2 backlash-free ball screw spindles, driven by DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm
- 1 test area up to nominal load:
- Test area width: 420 mm
- Max. test stroke without test tools, adapters, and KMZ: 1025 mm

Travel speed:

- Test speed: 0.0015 - 1000 mm/min at full load
- Return speed: 1000 mm/min

Force Measurement:

- Measuring range: 0.8 - 100% of nominal load, class 1 (optionally class 0.5)
(+/- 1% of displayed value according to DIN EN ISO 7500-1)
- Force measurement resolution: +/-180,000 digits at 20 ms integration time

The machine is delivered with a factory test certificate. If a factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs.

Crosshead Travel Measurement:

- Incremental square wave input with encoder monitoring, storage of crosshead position
- Travel measurement resolution: 1 µm

Dimensions (WxDxH) / Weight:

- Load frame: 685 mm x 550 mm x 1420 mm / 100 kg - Controller mounted on load frame

Standard Functions:

- Force, displacement, and strain control
- Overload protection, automatic force calibration
- Specimen break detector, return function
- Setup operation via control panel with display (force, displacement)

Data Processing:

- USB 2.0 interface or LAN
- Data transmission rate to PC: 50 Hz (standard), optional higher data acquisition frequency via special software module
- Internal data processing rate: 2 ms
- Optional: max. 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) available for additional sensors


115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% relative humidity
Required options for operation: Load cell, grips, PC (current standard, OS 8/10/11, testing software)


Load Cell 5000N
- Measuring range: 5–5000 N tension and compression, with nominal 2 mV/V output signal
- Overload protection: +/- 100%, Linearity: +/- 0.05%, Hysteresis: +/- 0.03%, Repeatability: +/- 0.02%
- Includes 1.5m connection cable and calibration certificate
- With extensometer MFX 200

The MFX 200-B extensometer, with its robust design and high measurement accuracy, is suitable for nearly all specimens starting from an initial gauge length of 10 mm. All strains can be measured from the modulus of elasticity up to specimen break. It can be used without restriction in both the lower and upper test area. In conjunction with the MFQ-A, r- and n-value determination for thin sheet metal is also possible. Two different measurement systems are available, differing in the measurement signal and other technical data (see technical documentation).

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.