Vertikalni obdelovalni center

Hedelius C80-2300

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, potovalna razdalja osi X: 2.340 mm, pomik osi Y: 800 mm, pomik po osi Z: 600 mm, širina mize: 750 mm, dolžina mize: 2.900 mm, obremenitev mize: 2.800 kg, Hedelius - C80/2300/8 Fully enclosed with extraction system Roll-up door for crane loading Holder station for 3 angular milling heads Generously dimensioned areas enable planar machining Spindle-to-table distance: 140–740 mm Pendulum guard for split machining Coolant tank with filtration, 350 liters HR410 handwheel (Heidenhain) Double LTA oil mist extraction Flexible, high-precision machining of large and complex workpieces with reliable German engineering quality. X-axis: 2340 mm Y-axis: 800 mm Z-axis: 600 mm Table length: 2900 mm Table width: 750 mm Table load capacity: 2800 kg Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 27 kW Spindle speed: 8,000 rpm Tool changer: 40 positions ICS (internal coolant supply): 20 bar Kledpfjx Sxx Nox Al Nsr Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 6,200 mm Width: 3,500 mm Height: 3,600 mm Weight: 13,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute representation or contract terms. We recommend you verify all critical details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.000 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, skupna višina: 3.376 mm, obremenitev mize: 2.500 kg, skupna masa: 16.300 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 33.000 W, teža orodja: 8.000 g, največja dolžina izdelka: 5.480 mm, število osi: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 positions and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table: 140 mm • Max. distance spindle nose to table: 860 mm • Work spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • Occupied adjacent pockets: 80 mm • Free adjacent pockets: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Utilities Ksdsx Nkp Ujpfx Al Nolr • Connection voltage: 380/400/415 V +10% • Mains frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank volume: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Fixture for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Travel motor for linear axis • Travel motor for rotary axis • Cylinder for swiveling unit

Stanje: rabljeno, Leto izdelave: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm Table size 2500 x 600 mm Max. workpiece weight 2000 kg Ksdpfx Aoulnbkol Njlr Tool holder SK40 Control system HEIDENHAIN Spindle speeds 30 - 8000 rpm Feed rate 45 m/min Rapid traverse 45 m/min Total power requirement 20 kW Machine weight approx. 10,500 kg Space requirement approx. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control - Tool magazine with 30 stations - Chip conveyor - Sieve filtration system with ICS (internal coolant supply) - Operating manual Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 11.000 h, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 700 mm, proizvajalec krmilnikov: HEIDENHAIN, obremenitev mize: 1.600 kg, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 30, število osi: 5, Ta 5-osni +GF+ MIKRON HPM 1350U je bila izdelana leta 2018. To univerzalno obdelovalno središče je idealno za napredne obdelave ter zagotavlja natančnost in učinkovitost. Razmislite o možnosti nakupa tega univerzalnega obdelovalnega centra +GF+ MIKRON HPM 1350U. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Premer vrtljive mize: 1100 mm Kledpsx D D Eiofx Al Nor • Dovod hladilne tekočine: 80 barov • Stroj je redno vzdrževan, ima le nekaj obratovalnih ur in vzdrževalno pogodbo z avtoriziranim ponudnikom storitev. Dodatne informacije Stroj je še vedno priključen na električno omrežje.

Stanje: rabljeno, Leto izdelave: 2008, Krmiljenje Siemens 840D Kljdpewzypnsfx Al Ner

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Kjdpfx Ajr A Hcbol Njlr Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 710 mm, premer struženja: 710 mm, moč vretenovega motorja: 11.000 W, hitrost vretena (min.): 38 obr/min, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 690 mm, pomik osi Y: 115 mm, pomik po osi Z: 1.545 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 26 m/min, hitri pomik na osi Z: 40 m/min, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: trifazni, nos vretena: JIS A2-8, skupna masa: 14.000 kg, dolžina orodja: 300 mm, teža orodja: 10 g, pomik osi W: 1.550 mm, Oprema: dokumentacija / priročnik, Obdelovalni center z vrtalno-rezkalno funkcijo OKUMA Multus B400 TEHNIČNE ZNAČILNOSTI: CNC krmilnik: OSP-P200L Razdalja med konicama: 1500 mm Maks. premer obdelave: 710 mm Višina osi nad suportom: 710 mm Pomik osi X: 690 mm Pomik osi Y: -115 / +115 mm Pomik osi Z: 1545 mm Pomik osi W: 1550 mm Natančnost pozicioniranja osi B: 0,001° Največja hitrost rezkalne glave: 6000 min⁻¹ Največja moč rezkalnega vretena: 11 kW Največji navor rezkalnega vretena: 65,7 Nm Rezkalna glava – vpenjalo: HSK-A63 Kapaciteta orodjarnika: 40 Največja dolžina orodja: 300 mm Največji premer orodja: 130 mm Največja teža enega orodja: 10 kg Hitri pomik na osi X: 4.000 mm/min Hitri pomik na osi Z: 40.000 mm/min Hitri pomik na osi Y: 26.000 mm/min Hitri pomik na osi W: 12.000 mm/min Vreteno – čelna prirobnica: JIS A2-8 Min. hitrost vretena: 38 min⁻¹ Maks. hitrost vretena: 3.800 min⁻¹ Korak osi C: 0,001° Kedpfxoyqx Rzj Al Njlr Napajalna napetost: 400 V Teža: 14.000 kg PRILOŽENA OPREMA: 1 × programska oprema One-Touch IGF 1 × dvotočkovni lunetni naslon ATLING, tip AX8I-NAOS (Ø85–360 mm) 1 × triodprti vpenjalni tulec SMW AUTOBLOK, Ø340 mm, KNCS-N-340-117 1 × regulator vpenjalnega tlaka za vpenjalno glavo 1 × izmetalec obdelovancev 1 × NC konjiček 1 × merilna sonda MARPOSS T18 1 × daljinski elektronski ročni volan 40 × vpenjalnih držal za orodje HSK-63 1 × dvobarvna signalna opozorilna luč 1 × transporter za odrezke 1 × rezervoar za hladilno tekočino 1 × transformator 1 × komplet navodil + OKUMA CD Stroj je možno videti v delovanju v našem obratu po predhodnem dogovoru. Cena po dogovoru, nakladanje na tovornjak vključeno. Možna dobava po celem svetu. Podatki na tej strani so zbrani po najboljših močeh, vendar za točnost ne moremo jamčiti. Stroj primerljiv s proizvajalci kot so Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron in Biglia. Prav tako na voljo CNC stružnice, obdelovalno-rezkalni centri ter rezkalni stroji.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, skupna masa: 41 kg, proizvajalec krmilnikov: FANUC, število osi: 6, Ta 6-osni robotski ročni manipulator FANUC CRX-20iA/L je bil izdelan leta 2024. Ima največjo nosilnost 20 kg in doseg 1418 mm. Spoji robota omogočajo velik razpon gibanja, kar povečuje njegovo fleksibilnost pri zahtevnih nalogah. Če iščete visokokakovostne možnosti avtomatizacije, priporočamo stroj FANUC CRX-20iA/L, ki ga prodajamo. Za več informacij nas kontaktirajte. • Robot je nov in neuporabljen, samo razpakiran. • Največja nosilnost na zapestju: 20 kg Ksdox D Ezljpfx Al Nslr • Največji doseg (konec prirobnice): 1418 mm • Krmiljene osi: 6 • Ponovljivost: ±0,04 mm • Mehanska masa: 41 kg • Gibalni razponi členkov: • J1: 360° • J2: 360° • J3: 540° • J4: 380° • J5: 360° • J6: 450°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, 5-osni obdelovalni center Krmiljenje: Heidenhain Pomiki: X 2000 mm, Y 600 mm, Z = H 800 mm, V 700 mm. Klodjyaba Djpfx Al Ner Maks. pritrdilna teža na vrtljivem stolu: 1200 kg Maks. hitrost vrtenja: 18.000 min⁻¹

Stanje: dober (rabljeno), Leto izdelave: 2014, Ref. No.: 10553 Manufacturer: HANDTMANN / BAVIUS Model: HBZ Trunnion 120 Year of manufacture: 2014 Control system: CNC CNC Controller: Heidenhain TNC 640 Location: Halberstadt Country of origin: Germany Machine No.: 200XXXXX X-axis travel: 1270 mm Y-axis travel: 1100 mm Z-axis travel: 900 mm Table height: Ø 1200 mm Table load capacity: 2000 kg Max. tool weight: 20 kg Max. tool length: 90 x 200 / 24 x 400 mm Max. tool diameter: Ø 130 mm Tool holder: HSK 100 Number of tool stations in magazine: 40 Tool magazine with: 140 pcs. Spindle speed (infinitely variable): 14,000 rpm Max. torque: 15,000 Nm Rapid traverse X-axis: max. 60 m/min Rapid traverse Y-axis: max. 60 m/min Rapid traverse Z-axis: max. 60 m/min Machine length: 7,500 mm Machine width: 5,500 mm Machine height: 3,500 mm Approx. machine weight: 26 t Ksdpfx Aljx Hn A Tj Nslr Rapid traverse C-axis: max. 25 rpm Rapid traverse A-axis: max. 20 rpm A-axis (swivel axis): -30 / +120 ° C-axis (rotary table axis): 360 ° Additional Information: - Horizontal machining centre, Y-axis vertically arranged - Machine stand constructed as a welded structure - Mounted on height-adjustable precision wedge mounts - Chip pan with coolant system, for external flood cooling Capacity: approx. 400 litres, with clean water pump, low-pressure circuit, approx. 40 l/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or spindle - Full safety enclosure - Stainless steel interior lining - Work area lighting - Manual loading door to work area with polycarbonate safety pane with glass cover pane - Side viewing window to work area with polycarbonate safety pane with glass cover pane - Maintenance area freely accessible - HSK 100 hollow shaft taper - Tool clamping via springs, hydraulic tool release - Tool clamping control - Taper cleaning - Incl. spindle orientation Machine can be inspected under power by appointment.