Stroj za oblaganje robov

Hebrock Top 2000

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Ledjxranpopfx Aacshc Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 3750, Funkcionalnost: popolnoma funkcionalen, The machine glues solid wood up to 18.0 mm as well as rolled materials up to 3.0 mm. Trims roll material up to 3.0 mm thick (PVC, ABS, and real wood up to 2.0 mm). Flush trimming up to 18 mm. Lhjdpfxoigad Eo Aacjc Rounding and chamfering milling stations. Total length: 3.20 m Power consumption: 7.1 kW Glue pot Cross-cut shears Infinitely variable feed speed Trimming saw for front and rear edges Flush trimming unit Rounding milling unit Chassis Extraction connection: 100 mm

Stanje: rabljeno, prevoženi kilometri: 330.300 km, moč: 195 kW (265,13 KM), prva registracija: 05/1988, vrsta goriva: bencin, barva: črn, vrsta prenosa: samodejen, Oprema: ABS, klimatska naprava, * Becker Europa radio * Usnjeni sedeži * Klimatska naprava * Avtomatski menjalnik Odlično stanje!! Lsdpfxsvhu Rue Aacshc * Tempomat * ABS * Servo volan * Lita platišča * G-Kat katalizator * Originalno lakiranje * Originalna notranja oprema * Letnik: 1988 * 8-valjnik ----Interna številka vozila: 7954----Pridržujemo si pravico do napak in vmesne prodaje. Podpora preko WhatsApp na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite kar prek WhatsApp. Whatsapp Whatsapp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 5.466 h, This HOLZMA HPP 82/43 panel saw was manufactured in 2001. It features a main saw motor with 13.5 kW and a scoring saw motor with 2.2 kW, delivering robust performance. The machine offers a cutting length of 4300 mm and a cutting width of 4250 mm, with a saw blade diameter of 380 mm. It has only logged 5,466 operating hours. Take advantage of this opportunity to purchase the HOLZMA HPP 82/43 panel saw. Contact us for further information. Additional equipment • 7 clamps: the first three are double-fingered, all others are single-fingered • 2 additional double-fingered clamps possible • 1 additional single-fingered clamp possible Machine advantages Technical machine advantages • CE-certified // GS-certified FPH // dust tested • Maximum clamp opening: 100 mm • Cutting length: 4300 mm • Cutting width: 4250 mm • Air cushion table: 1 table 2160 x 650 mm and 3 tables 1760 x 650 mm with blower • Saw carriage feed rate: 5 - 125 m/min // Saw carriage return speed: 125 m/min • Program carriage speed forward/reverse max. 80 m/min • Saw blade diameter: 380 mm // saw blade projection: 95 mm • Main saw blade: carbide-tipped 380 x 48 x 60 • Scoring saw blade: carbide-tipped 180 x 48 - 58 x 45 Additional information Media Compressed air: 6 bar Operating voltage: 400 V / 50 Hz Ledsx E Echspfx Aacjhc Minimum operating temperature: +5 °C Maximum operating temperature: +35 °C Minimum extraction velocity at extraction nozzle: approx. 26 m/s Extraction connection for chip duct: 1 x 200 mm Extraction connection for pressure beam: 1 x 150 mm

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Lsdjyfn Tnepfx Aacehc Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Leto izdelave: 1990, Stanje: rabljeno, Power connection: 400 V, 3 kW Glue roller Milling unit: 2x flush trimming Edgebanding material up to 0.4 mm Dimensions (LxWxH): 3150 x 680 x 1250 mm Weight: approx. 400 kg Conversion to 2 mm PVC edging possible (surcharge: €1,000.00) Lhsdskkfk Nepfx Aacsc