Stroj za lepljenje robov, na voljo december 2025

Hebrock F4

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Hodpfx Ahehqadcj Dsfn Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Edge banding machine Hebrock F 4 with jointing, corner rounding, and two scraper blades. Very well-maintained machine from a small workshop in excellent condition. Color touch-screen interface with PLC control for easy machine operation; up to 10 operating programs can be stored. Edge thickness (roll): approx. 0.4–2 mm Workpiece height: approx. 10–40 mm Feed speed: approx. 7 m/min Sound-insulating hood Extendable workpiece support Extraction port: 1 x 140 mm Units: Top pressure with manual adjustment, SIKO counter Infeed fence with manual adjustment, SIKO counter Edge thickness manual adjustment, SIKO counter Hfedpjw Sn I Ejfx Ah Don Jointing cutter with diamond-tipped cutters, cutters resharpened Gluing station with automatic edge feed for roll material up to 2 mm Gluepot with glue change device for quick color changes Pressure zone with 3 rollers End trim saw Combined milling unit R2 with pneumatic adjustment between thin and thick edges Radius scraper R2, pneumatically retractable Corner rounding unit R2, pneumatic adjustment between thin and thick edge The profile trimmer can also be used in shelf mode, i.e. only the straight edge is rounded, not the corners Glue joint scraper, pneumatically retractable Hood locking CE mark Operating manual A video of the running machine can be sent on request. All indexable inserts of the milling and scraper units have been replaced or rotated, saws resharpened. The machine is immediately ready for use. The diamond jointing cutters have also been resharpened. Paintwork blemishes have been touched up. The machine has approx. 335 hours of operation and only processed approx. 20,700 linear meters of edge. The machine is in very good condition, see original photos. Machine dimensions approx. 4050 x 1100 x 1400 mm (LxWxH) Weight approx. 800 kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration at our warehouse, see "other offers from this supplier."

Stanje: dober (rabljeno), Leto izdelave: 2025, • Additional interchangeable glue pot • PLC control (including touchscreen) • Application of hot-melt adhesive to the workpiece up to 3 mm jointing cutter • Jointing cutter (including DIA tool) up to 2 mm cutting depth Hfedpfx Ajxgfpzjh Dsn • Glue pot, maintenance-free with preparation for interchangeable pot including glue discharge device • HF cross-cut saw station (approx. 12,000 rpm) • HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutters (combined version) • Corner rounding unit • Surface scraper (including pneumatic lift) • Free space (for cleaning unit or radius scraper) • Robust chain drive • Ball-bearing double pressure rollers • Viewing window from the rear of the machine • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock radius scraper F4/09 (including pneumatic lift) • Hebrock pneumatic 3-point adjustment (radius, chamfer, flush milling) Available from: immediately Delivery terms: ex site – EXW Berlin Payment terms: payment before collection Accessories without guarantee. The following applies: “Item sold as seen.” The buyer must check the completeness of the object on site.

Stanje: novo, Leto izdelave: 2024, Obrobni stroj za lepljenje robov F4 Popolnoma nov stroj Leto izdelave: 2024 Stroj za lepljenje robov z PLC krmilnim sistemom (vključen zaslon na dotik) in sistemom za nanašanje lepila za robne materiale do debeline 3 mm: Enota za predrezanje (z diamantnim orodjem) za plošče do debeline 2 mm Posoda za lepilo s hitrim segrevanjem in premazano notranjostjo, ki ne potrebuje vzdrževanja Pripravljeno za zamenljive posode za lepilo (vključen sistem za hitro zamenjavo vročega lepila) Visokofrekvenčna postaja za obrezovanje koncev (~12.000 vrt/min) Visokofrekvenčna rezkalna postaja (~12.000 vrt/min) z neodvisno pnevmatsko nastavitvijo in reverzno žago za panele (kombinirana izvedba) Robustna dovajalna veriga Zgornja pritrdilna enota z dvojnimi valji (na krogličnih ležajih) Hedpfx Ahexf H Snj Dofn Zadnje okno za boljšo vidljivost Podaljšljiva prednja podpora Hitrost podajanja približno 10 m/min OPCIJE NA ZALOGI: Sistem za hitro menjavo kotne rezkalne enote (F4/08/4) Nesting enota (za rezkalne in radijske strgala) (F4/27) Pnevmatska nastavitev v treh točkah (ravni, poševni, radialni rez) (F4/30) Notranja LED osvetlitev (F4/32)

Stanje: novo, Leto izdelave: 2024, IN STOCK!!!! Hfodpfxjglfwto Ah Djn Max. edge thickness 3 mm Min/Max. workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 10 m/min Ready for operation a pprox. 3.5 min. Max. power consumption approx. 7.4 kW Electrical connection 400 V – 3 Ph – 50 Hz Working table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Extraction nozzle Ø 1 x 140 mm Edgebander with PLC control Jointing unit (incl. DIA-tool) up to 2 mm milling depth Combination milling head Radius milling R=2 mm Radius corner milling R=2 mm Radius scraper blade R=2 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, potrebna višina: 1.200 mm, Edge banding machine equipped with: Hedpfewy Ugxjx Ah Dofn - Trimmers - Edging tape magazine - Interchangeable hotmelt glue pot for EVA or PUR - Flush trimming - Corner rounders

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Hebrock Edge Banding Machine Type: F 4 Year of Manufacture: 2024 Serial No. F 4371 / Including special equipment: - Quick-change device for corner rounding unit No. F4/08/4 - Additional interchangeable motor for corner rounding unit No. F4/08/5 - Radius scraper (pneumatic lift-off) No. F4/9 Hjdpfovkv Elex Ah Dofn - Multi-radius scraper (R2/1) No. F4/09/4 - Spray unit for release agent No. F4/24/1 - Pneumatic 3-point adjustment No. F4/30 - Jointing up to 50 mm workpiece thickness No. F4/31 Commissioning on site by Hebrock available. (Factory training) Cost: €798 + VAT List price of the machine incl. equipment: €49,110 excluding VAT Machine available immediately

Stanje: novo, Edge thickness up to 3 mm Total length 4,122 mm Feed speed 10 m/min with PLC control (including touchscreen) and hot-melt glue application indication to the workpiece for tape material up to 3 mm Jointing cutter (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation end trimming unit, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable profile cutter (combination version), corner rounding unit, surface scraper (including pneumatic lift), vacant station (for cleaning station or radius scraper), sturdy chain drive, double roller pressure beam with ball bearings, viewing window from the rear of the machine, extendable workpiece support, approx. 10 m/min feed speed. Art. No. F4/00/11 - Whispercut jointing head F4/500/10 - Combination profile cutter head F4/500/20 - Radius cutter R=2mm F4/500/2 - Corner radius cutter R=2mm F4/08/2 Hodpfx Ahevwd Uuj Dsfn - Quick-change device for corner rounding unit F4/08/4 - Radius scraper (incl. pneumatic lift) F4/09 - Radius scraper R=2mm F4/09/2 - Chassis F4/10 - Pneumatic 3-point adjustment (radius, chamfer, flush milling) F4/30