Stroj za robne trakove

HEBROCK AKV 3003 DK-F

Stanje: zelo dobro (rabljeno), Hebrock 3003 Edge Banding Machine Well equipped, possibility to inspect before purchase PRE-MILLING cutters Zero Joint AirTronic system – glueless hot air technology Glue application by roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids End-trimming saw Iedswmc I Djpfx Agpea Top and bottom milling unit, radius R1 – R2 adjustable pneumatically Corner rounding unit adjustable pneumatically Flat scraper Max workpiece height: 50mm Max edge thickness in roll: 3mm Feed speed: 10 m/min Power requirement: 15.8 kW Condition: Very good, fully functional

Stanje: novo, Leto izdelave: 2024, IN STOCK!!! Max. edge thickness: 3 mm Iodpfx Agjhymgdopja Min./Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination milling head Radius cutter R=2 mm Radius corner cutter R=2 mm Radius scraper blade R=2 mm

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Rabljeni stroj GM020.0068 AKV 3003 DK - F Leto izdelave: 2007 Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Podvozje Ijdpow Nih Isfx Agpoa Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5°

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Iedpfx Agexfh Tmjpea Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: novo, Tip 1000-2S Delovna širina: 1000 mm Isdpfx Agom Dr Rnepea Minimalna delovna dolžina: 400 mm Delovna debelina: 2–80 mm Hitrost brusilnega valja: frekvenčno regulirana Hitrost podajanja: 5–20 m/min Skupna moč motorja: 4,12 kW Transportne dimenzije: 1700 x 1600 x 1400 mm Teža: 800 kg Cena: 4.130 EUR (EXW Jonava, Litva)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Kaeser screw compressors – various models Iedpfx Ajqcu Rcjgpja

Stanje: novo, Leto izdelave: 2025, Heating output / nominal heat output: 21 kW For spaces of approx. 300 to 500 m³ (according to DIN 4108) Flue outlet: rear (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Filling opening dimensions (L x W): 300 x 340 mm Ijdehvibzepfx Agpea Weight: 375 kg Efficiency: 88.2% Energy efficiency class: A+ The EWI-A 15G room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the emission limits of the 1st BImSchV (Federal Immission Control Ordinance).

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Iedpjvvkfwofx Agpja

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection Iedpfjvvkfdsx Agpea - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Leto izdelave: 2022, Stanje: novo, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, Ijdpfx Asihahmegpja tiltable, Extension table, Mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Tilting range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Maximum cutting height: 87 mm, Maximum saw blade diameter: 315 mm, Mitre fence tilting range: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction port diameter: each 1 x 100 / 50 mm, Weight: 450 kg Large extraction hood Location: Available from stock 54634 Bitburg - immediately available - Location: Available from stock 54634 Bitburg - free loaded - - immediately available -