Varilnik kolkov

HBS CD 2010

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg Itedpfoxddamjx Af Tjb On-site inspection is possible.

Leto izdelave: 2009, Stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version - Ground cable - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm Iedpfx Afjhq T N De Tetb - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg

Stanje: novo, Leto izdelave: 2025, Punkcijski varilni stroj / Namizni punkcijski varilni stroj – aktualna izvedba letnik 2025 – nova naprava Krmiljenje TE 101 z digitalnim prikazom varilnega toka Iedpjh Nu A Nsfx Af Tetb Nazivna moč 20 kVA/50 % ED Priklop na omrežje 400 V Kratkostični tok 19 kA Varilni tok 15,2 kA Varovalka 63 A Dovod/ faza 25 mm² Sila elektrode 187 daN pri 6 bar Izvitje 160 mm Stožec elektrode MK1 Masa 81 kg - 2-stopenjsko nožno stikalo - Glavno stikalo - Pnevmatska vzdrževalna enota s filtrom - Stroj je naš demonstracijski stroj - Stroj je možno po dogovoru in predhodnem terminu predstaviti v Dresdnu

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Itsdpow Uc Npsfx Af Tsb Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed Angle Plate Table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 250 mm total Universal Tilting Table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 350 mm total - Swivelling range on three planes, on either side: 30°- 45°- 30° Spindle Taper: - Horizontal spindle housing: ISO 30 (40) - Vertical milling head: ISO 30 (40) - Universal quick-change head: SV E20+ES20 Vertical Swivelling Range: Vertical milling head: 360° Longitudinal travel: Hand/automatic: 320/300 mm Vertical travel: Hand/automatic: 375/355 mm Transverse travel: Adjustment handle: 150 mm Quill travel: 60 mm Reading accuracy with micrometric vernier: 0.02 mm Main motor (kW/rpm): 1.5/1500 Feed motor (kW/rpm): 0.45/3000 Coolant pump motor (kW/rpm): 0.15/3000 Spindle speed: - 1st range (rpm): 58-375 - 2nd range (rpm): 330-2000 Working feeds - longitudinal or vertical (mm/min): 12-400 - 10 feed rates (mm/min): 12-18-26-38-57-85-125-185-270-400 Rapid traverse (mm/min): Longitudinal or vertical: 1200 Subject to errors or omissions, the technical data is provided without guarantee.

Stanje: rabljeno, Roots vacuum pump (Roots blower) Itedocnyzuopfx Af Tob Condition: Fully overhauled Manufacturer: Leybold Model: Ruvac WS 501 Warranty: 12 months Accessories: Oil filling Delivery time: ex stock

Stanje: novo, Table height: 650 - 1050 mm Ijdpfxofk E Dzj Af Tetb Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 05542, Offer 25128 Technical Data: Iodpfxjwn Emlo Af Tetb - Rated power at 50% duty cycle: 25 kVA - Maximum welding power: 68 kVA - Throat depth adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding capacity for sheet steel approx.: 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water flow: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - Equipped with: - Single-phase controller T 90 Mark II - Electric foot switch - Separate cooling water recirculator

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 230 h, Basic information: Maximum lifting height on the rope: 8.8 m. Maximum lifting capacity: 2.9 t. Dimensions: 2.69 x 0.6 x 1.59 m. 360-degree continuous boom rotation. 9.6 kW diesel engine. Additional 4-phase, 400 V, 3.7 kW electric motor. Winch: 59.47 m. Dimensions with outriggers extended: max. 3.93 m x 3.88 m. Crane operating weight: 2,090 kg. Overload acoustic warning signal. Iodpfewf Sfiox Af Totb Glasslift is a distributor of BG LIFT and UNIC mini cranes, SCHMALZ and RIGHETTI vacuum lifters, SMARTLIFT manipulators, PAUS roofing cranes, and CELA spider lifts. We are part of the GGR GROUP and have also introduced our own GLW series of transport trolleys. Thanks to our extensive range of equipment, we can offer machines tailored to the specific requirements of each job, ensuring we meet every customer's needs. At Glasslift, we don’t just deliver projects; we provide the tools for their efficient execution. In addition to sales, we also offer short- and long-term rental options for the aforementioned equipment. Glasslift is a professional team of operators specializing in comprehensive glass installation, steel handling, and the operation of structural components. Our team of experienced specialists has in-depth industry knowledge and is highly qualified, with each operator fully committed to completing entrusted projects. We have the necessary expertise, technical knowledge, and relevant substantive preparation, making us a partner you can fully trust. Our skills are supported by positive feedback, references, and publications about us, all of which attest to our reliability and professionalism. Work with the best to ensure comprehensive and efficient project delivery. For sale: USED Japanese mini crane UNIC URW-295 Perfect for window frame installation jobs. It features high durability, excellent adaptation to tough conditions, and compact dimensions. This is a unit in exceptional condition – operated exclusively by our staff. The crane has a valid UDT inspection certificate until April 2025.

Stanje: rabljeno, Technical Details: Power consumption: 2.3 kVA Open-circuit voltage: 56 - 198 V Protection class: IP44 Approximate machine weight: approx. 35 kg Machine dimensions (HxWxD): approx. 0.4 x 0.3 x 0.27 m Iedpfeu Nwxzex Af Tstb Handheld Unit Power supply: 230V / 10A / 50Hz Stud welding unit with 3 stud-holder guns for Ø 2x 5 mm and Ø 1x 6 mm, including ground cable. Device has been tested and is fully functional.

Stanje: novo, Leto izdelave: 2025, Longitudinal and Transverse Seam Welding Machine (50Hz) --- Rated power at 50% duty cycle: 80 kVA Short-circuit current: approx. 35.9 kA Electrode force: 100–600 daN / double stroke Throat depth: 550 mm Roller electrode Ø longitudinal: 160/125 mm Roller electrode Ø transverse: 160/160 mm Feed rate: 0.63–5.7 m/min (electronic) --- Welding controller: Filius Classic, 128 programs Siemens S7-1200F PLC machine control Prepared for spot and projection welding. --- Iodjwqmrzjpfx Af Tjtb Including extra options: - 2-channel safety valves - Double foot switch - Adjustment device - Lower arm support - Depressurised lowering of upper assembly - Electronic flow monitor - Electronic electrode force switch - Main switch --- 6 months warranty --- Training and commissioning on request --- Spot welding electrodes & spare parts available from stock --- For further information, please visit our homepage