Sredinski stružnica in stružnica za vreteno

HBM 320 x 900 DRO Professional

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružna postelja, vodilno-vlečni stružnica, Leit- und Zugspindel-stružnica -Proizvajalec: Meuser, vodilno-vlečni stružnica tip M-IV-S -Postelja stroja: kaljena -Dolžina struženja: 3800 mm -Premer struženja nad posteljo: 720 mm -Premer struženja nad suportom: 440 mm -Vretenina odprtina: Ø 95 mm -Hitrosti vretena: 22,4 - 1000 o/min -Klinično vpenjalo Forkardt Ø 400 mm -Držalo konjička: MK6 -Pogon: 18 kW -Oprema: 1x luneta, Multifix nosilec orodja, orodja glej fotografije Chjdjwrfkfspfx Afqef -Dimenzije: 5930/1650/H1600 mm -Teža: 7500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 290 mm, Year of manufacture: 1986 Travel distances: X = 300 mm Y = 160 mm Z = 290 mm Equipment: - Standard accessories - Vertical milling head, ISO 40/ 20x2 - Fixed angle table 210 x 600 mm, NEW! - Retrofitted safety guard for milling spindle, electrically interlocked, NEW! - 3-axis active digital readout (TNC113) - Coolant system - Machine lamp - Machine feet - Documentation Cedpfx Ajwgafyofqehf Condition: Good, mechanics and control system workshop-tested

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Chedpsqwgzqofx Afqef Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.

Stanje: novo, WM180V - ROGI variable speed metal lathe 230V-1Ph Swing over bed ----- 180 mm Swing over cross slide ----- 110 mm Centre height ----- 90 mm Distance between centres ----- 300 mm Bed width ----- 100 mm Cross slide travel ----- 75 mm Compound slide travel ----- 55 mm Spindle bore ----- 21 mm Spindle taper ----- MT3 Spindle speed range ----- variable 50 - 2500 rpm Thread cutting Whitworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Tailstock quill travel ----- 60 mm Tailstock quill diameter ----- 30 mm Tailstock taper ----- MT2 Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3-jaw chuck 100 mm - self-centering * 4-way tool post * Drip tray * Rear splash guard * Chuck guard * Leadscrew guard * Tool slide guard * Set of change gears * Digital speed readout * Fixed centres * Forward / Reverse switch * Tools in box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed steady rest * Follow rest * Face plate 170 mm Cjdjga T Ebspfx Afqehf * Stand * TOOA0 quick change tool post * Turning tool set

Stanje: novo, Leto izdelave: 2025, DPF MASTER FLASH STANDARD™ is a compact device for the regeneration of diesel particulate filters (DPF) using the hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and an integrated filtration system. The cleaning process is fully automated and restores up to 99% of the filter’s original factory specifications. The system is supplied with adapters compatible with all passenger car DPF filters. To further optimize the regeneration process, we recommend purchasing the specially developed DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - Chamber external dimensions (cm): 150 x 80 x 131 - Liquid tank: 150 liters - Working pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Adjustable liquid temperature: 30°C to 100°C - Pump capacity: up to 133 L/min - Liquid filtration: 5 – 100 microns - Safety features: temperature sensor, liquid level sensor, emergency stop switch - Declaration of conformity: CE EQUIPMENT: - Liquid level sensor - Temperature sensor - Programmable temperature controller - Programmable controller for automatic operating cycle - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0–8 bar) - Integrated filtration system - Adapters for DPF filters With the purchase of our machine, you receive a starter kit to help you get up and running immediately. The kit includes: - Set of 3 filter cartridges + 3 spare filters - XPOWER DPF Cleaner chemical package (2 x 1 L) Cjdpfxegllxge Afqjhf

Stanje: dober (rabljeno), Leto izdelave: 1991, 1 rabljeni univerzalni orodni rezkalni stroj Proizvajalec: Deckel Tip: FP 1 Cjdpfx Asw Sdmdofqshf z aktivnim digitalnim prikazovalnikom Heidenhain Leto izdelave: 1991 Tehnični podatki: X-hod: 300 mm Y-hod: 160 mm Z-hod: 340 mm Vpenjalo vretena: SK 40 Vertikalni hod pinole: 60 mm Velikost mize: 600x210 mm Hitrosti vretena: 40–2000 vrt/min Teža stroja cca: 1 t Priključna moč: 7,5 kW Prostorske potrebe cca: 1,6x1,3x1,8 m Opremljen z: fiksno mizo nagibno mizo univerzalnim delilnikom različnimi držali za orodje horizontalnim naslonom

Stanje: novo, Leto izdelave: 2025, CORMAK 400 metal lathes are the new, improved version of the popular metalworking lathes. Upgrades include an improved tool post guard, spindle bearing system, new digital readout. They are suitable for manufacturing plants, workshops, and toolrooms—ideal for single-piece and small batch production. NEW, ENHANCED MODEL!!! - High-quality and reinforced spindle bearing system - New protection system compliant with CE standards - Latest model of axis digital readout - Reinforced, modernized lathe base with tool drawers and retractable chip tray Machine Features - REINFORCED, RIBBED BED SURFACE ENSURES MAXIMUM VIBRATION REDUCTION, BED IS ALSO PRECISELY GROUND AND HARDENED - 2-AXIS DIGITAL READOUT INCLUDED AS STANDARD - OPTIMAL PERFORMANCE THANKS TO LARGE 52 mm SPINDLE BORE - PROPER BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS - MACHINE EQUIPPED WITH HIGH-QUALITY, REINFORCED SPINDLE BEARING SYSTEM - EFFICIENT MACHINING WITH TWO AUTOMATIC FEEDS AND FITTED WITH LEADSCREW AND FEED SHAFT - HARDENED GEARS IN THE SPINDLE GEARBOX - ADJUSTABLE OVERLOAD CLUTCH ON THE FEED SHAFT - FULL THREAD RANGE WITHOUT NEEDING TO CHANGE GEARS - FEED SELECTION LOCK: VIA LEADSCREW OR FEED SHAFT - REMOVABLE GAP FOR MACHINING WORKPIECES OF INCREASED DIAMETER - RETRACTABLE CHIP TRAY AND TOOL DRAWERS FOR IMPROVED AND EFFICIENT WORKFLOW Technical Specifications MAXIMUM TURNING DIAMETER: 400 mm MAXIMUM TURNING DIAMETER OVER CARRIAGE: 250 mm MAXIMUM TURNING DIAMETER IN GAP: 520 mm TURNING LENGTH BETWEEN CENTERS: 1000 mm BED WIDTH: 218 mm SPINDLE NOSE: CAMLOCK D5 SPINDLE TAPER: MK6 SPINDLE BORE: 52 mm SPINDLE SPEED RANGE: 65–1810 rpm NUMBER OF SPINDLE SPEEDS: 16 ranges LONGITUDINAL FEED RANGE: (40) 0.053–1.291 mm/rev CROSS FEED RANGE: (40) 0.011–0.276 mm/rev MAXIMUM TOOL SIZE: 25 mm x 25 mm METRIC THREAD: 0.4–7 mm INCH THREAD: 4–60 T.P.I. MODULAR THREAD: (22) 0.4–3 mm DIAMETRICAL PITCH THREAD: (28) 8–84 D.P. Chedpfeiz Tczsx Afqef TAILSTOCK SLEEVE DIAMETER: 50 mm TAILSTOCK SLEEVE TRAVEL: 110 mm TAILSTOCK SLEEVE TAPER: MT4 MAIN MOTOR POWER: 2.2 kW COOLANT PUMP POWER: 0.1 kW WEIGHT: 640 kg DIMENSIONS: 2000 x 820 x 1650 mm Standard Equipment - 2-axis digital readout - Fixed steady rest - Travelling steady rest - 3-jaw chuck 200 mm - 4-jaw chuck 200 mm - Faceplate 280 mm - Fixed center MT4 x 2 - Reducing sleeve MK6/MK4 - Keys For more information, please visit our website.

Stanje: rabljeno, Leto izdelave: 2011, 1 used welding machine Manufacturer: Merkle Model: MobiARC 280 cel Year of manufacture: 2011 Technical Data: Welding Inverter Merkle MobiARC 280 cel+ – with accessories Primary winding: Mains voltage: 400 V Mains frequency: 50/60 Hz Power consumption: 8.3/5.5 | 9.7/8.3 kW Current consumption: 12/8 | 14/12 A Chsdpfx Afsh Nvfnoqof Max. current: 21/16 A, cos φ: 0.98 Manual arc welding: Electrode diameter: 1.5–6.0 mm Open-circuit voltage: 96 / 90 V Welding voltage: 20.6–31.20 V Welding current: 15–280 A, current at 60% duty cycle: 250 / 260 A TIG welding: Open-circuit voltage: 96 / 90 V Welding voltage: 10–21.2 V Welding current: 5–280 A, current at 60% duty cycle: 250 / 270 A Insulation class: H Protection class: IP23 Operating modes: MMA, TIG (DC), Cooling: AF Overall dimensions: 485 x 200 x 435 mm Weight: 17.5 kg

Stanje: novo, Leto izdelave: 2025, Metal lathe TYTAN 750 VARIO, 230V with stepless spindle speed adjustment. Machining parameters: 250 x 750 mm, DC motor: 1.1 kW / 230V. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming. Typically used in small industrial plants, workshops, garages, etc. Main advantages: - Modern DC motor with infinitely variable spindle speed control ensures user convenience and shortens calibration time. - LCD display for spindle speed allows monitoring and quick adjustment during cutting and threading operations. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels and high (100-2250 rpm) for precision turning at high speeds. - Thread cutting capabilities: metric – 18 types (0.2-3.5mm), imperial – 21 types (8-56 TPI), with the ability to cut both right- and left-hand threads. - Automatic longitudinal feed with 6 speed ranges (0.07 to 0.40 mm/rev) significantly reduces machining time without compromising the quality of long workpieces. - The machine is fully compliant with EU directives (CE) and Polish as well as DIN standards. Technical specifications: 3-jaw chuck: 125 mm Chodpew H Rausfx Afqof Max turning diameter over bed: 250 mm Turning diameter over cross slide: 150 mm Turning length between centers: 750 mm Max installed part length (chuck/center): 700 mm Bed width: 135 mm Tool post dimensions: 65 x 65 x 20 mm Max tool dimensions: 12 x 12 mm Spindle bore: 30 mm Spindle taper: MT4 Spindle speed adjustment: stepless (L/H) Spindle speed ranges: L: 50–1125 / H: 100–2250 rpm No. and range of metric threads: (18) 0.2–3.5 mm/rev No. and range of imperial threads: (21) 8–56 T.P.I. No. and range of longitudinal feeds: (6) 0.07–0.4 mm/rev Compound slide travel: 70 mm Longitudinal travel: 650 mm Cross slide travel: 135 mm Tailstock quill diameter: 30 mm Tailstock quill travel: 60 mm Tailstock taper: MT2 Motor power S1/S6: 1.1/1.32 kW / 230 V Dimensions (L/W/H) without stand: 1310 x 610 x 490 mm Dimensions (L/W/H) with stand: 1350 x 560 x 1250 mm Weight without stand: 165 kg Weight with stand: 180 kg Standard equipment: - 3-jaw chuck (125 mm) - Fixed and travelling steady rests - Change gears - Fixed center MT2 - Fixed center MT4 - Left and right jaws (1 set) - Oil gun - Chip tray - Chuck and tool post keys - Set of service tools - Safety guards compliant with CE standards

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Csdpfxeu R S Hpe Afqohf Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new display machine -