Teleskopska delovna ploščad

Haulotte HA32RTJ Pro

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 Hnsdpfxjizu Nts Abxen 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: novo, Leto izdelave: 2025, Genie Z34/22N electric articulated boom lift, new, used, and demonstration machines available. Hedpjvmxd Njfx Abxsnn

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg Hnodpog Sk Trjfx Abxen King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: rabljeno, Leto izdelave: 2016, vrsta goriva: dizel, Weights Unladen weight: 6,650 kg Functionality Mast type: Articulating boom Lifting capacity: 230 kg Working height: 1,601 cm CE marking: yes Condition Overall condition: average Technical condition: average Visual condition: average Further Information Terms of delivery: EXW Max. horizontal outreach: 8.74 m Max. boom rotation angle: 360° Max. platform rotation angle: 360° Transport dimensions (L x W x H): 5.09 x 2.3 x 2.42 m Additional Information Please contact Christian Theißen for further details. Manufacturer: Haulotte Hnjdpjywidgofx Abxon Model: HA16RTJ Year of manufacture: 2016 Product category: Used Technical Data: Max. working height: 16.01 m Driveable at working height: 16.01 m Platform height: 14.01 m Max. outreach: 8.74 m Platform load capacity: 230 kg Platform dimensions (L x W): 1.80 x 0.78 m Slew angle: 360° / continuous Gradeability: 40% (forward) / 45% (reverse) Overall dimensions (L x W x H): 6.73 x 2.30 x 2.27 m Transport dimensions (L x W x H): 5.09 x 2.30 x 2.42 m Ground clearance: 0.24 m Tail swing: 0.09 m Drive type: Diesel Operating weight: 6,650 kg Special features: Rotating work platform, jib arm, all-wheel drive, non-marking tires, diesel particulate filter, PSA anchor points fitted.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 227 kg, lastna masa: 6.428 kg, gradbena višina: 2.050 mm, vrsta goriva: električni, skupna dolžina: 5.110 mm, vrsta pogona: Elektro, gradbena širina: 1.190 mm, delovna višina: 11.140 mm, Zglobna teleskopska dvižna ploščad Tehnično stanje: Novo Hjdex Uumzjpfx Abxonn

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 5.110 mm, Zglobna teleskopska delovna ploščad Genie Z-30/20N RJ Hodpfx Asx Haw Ajbxjnn Električni pogon Leto izdelave 2025 Delovna višina (mm) 10.890

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.183 h, moč: 18 kW (24,47 KM), vrsta goriva: dizel, barva: drugo, Tehnične informacije Pogon: kolesa Tip motorja: Kubota V1505-EU1 Lastna teža: 7.414 kg Dimenzije (D x Š x V): 556 x 232 x 247 cm Funkcionalno Steber: pregibno roko Dvižna zmogljivost: 230 kg Delovna višina: 1.818 cm Največji doseg: 1.051 cm Hnsdpfx Ajykimaobxjn Označevanje CE: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro = Dodatne možnosti in oprema = - Signalna luč = Pripombe = Pogonski sklop Stopnja (Tier): Stage V / Tier IV final Splošno Država izdelave: Francija Stanje CE tip: CE

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Hnjdpfoyhkrrjx Abxjn Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: rabljeno, Leto izdelave: 2014, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Drivetrain Drive: Wheeled Weights Unladen weight: 20,046 kg Functionality Mast: Articulating boom Lifting capacity: 450 kg Working height: 4,010 cm CE marking: yes Condition Overall condition: average Technical condition: average Visual condition: average Hnodpev Tiybofx Abxon Further information Delivery terms: EXW Max. horizontal outreach: 20.20 m Transport dimensions (L x W x H): 14.6 x 2.5 x 3.05 m Country of manufacture: US For more information Please contact Christian Theißen for further details. Manufacturer: JLG Model: 1250AJP Year of manufacture: 2014 Product type: Used Specifications: Max. working height: 40.10 m Platform height: 38.10 m Max. outreach: 20.25 m Platform capacity: 450 kg Platform dimensions (LxW): 2.44 x 0.92 m Slew range: continuous Gradeability: 45% Overall dimensions (LxWxH): 14.60 x 2.50 x 3.05 m Driveable up to working height: 40.10 m Maximum wheel load: 130 kN Ground clearance: 0.26 m Drive type: Diesel Operating weight: 20,046 kg Special features: Rotating work basket, jib arm/slew angle 130°, all-wheel drive, oscillating axle, fixed generator for 230V, power socket in the basket.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 286 h, številka stroja/vozila: Z4525M-10187, nosilnost: 227 kg, dolžina platforme: 760 mm, širina platforme: 1.830 mm, skupna masa: 7.400 kg, delovna višina: 15.940 mm, TECHNICAL DETAILS Working height: 15.94 m Platform height: 13.94 m Hnedpfx Aboyzrctexen Outreach: 7.65 m Up-and-over height: 7.24 m Platform length: 0.76 m Platform width: 1.83 m Height, stowed: 2.00 m Length, stowed: 6.83 m Width: 1.79 m Wheelbase: 2.03 m Ground clearance (center): 0.24 m Lifting capacity: 227 kg Platform rotation range: 160° Jib length: 1.52 m Vertical jib articulation: 135° Upper structure rotation: 355° Drive speed, stowed: 4.8 km/h Drive speed, elevated/extended: 1.0 km/h Gradeability, stowed: 30 % Tilt sensor activation (longitudinal axis/lateral axis): 2.5° – 4.5° / 4.5° Turning radius (inside/outside): 1.8 m / 4.27 m Tyres: 0.23 × 0.37 m MACHINE DETAILS Drive type: 48 V DC (8 × 6 V, 350 Ah or 355 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 30.3 l Own weight: 7,400 kg Tyre contact pressure: 689 kPa Ground pressure (tyres): 15.08 kPa Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s²