Horizontalni stružnice Harrison ALPHA 400 PLUS 1998

Harrison ALPHA 400 PLUS

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Klodjh Hvk Aepfx Af Njl Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: dober (rabljeno), Leto izdelave: 2001, Gildemeister NEF 520 CNC Lathe TECHNICAL DATA Working Area Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Chuck diameter: 250 mm Cross slide travel: 260 mm Distance between centers: 850 / 1350 mm Main Spindle Spindle nose: DIN 55027 Size: 8 Spindle bore diameter: 70 mm Spindle taper: metric 80 Spindle diameter at front bearing: 120 mm Main Drive AC Drive power: 12 kW Max. torque: 920 Nm Speed range: 10 – 3000 rpm Gear stages: 2 Selectable speeds: Stepless Feed Drive Kedpfx Ajwftvisf Nsll X-axis feed force: 5000 N Z-axis feed force: 10000 N X-axis rapid traverse: 8 m/min Z-axis rapid traverse: 10 m/min Tool Holder Multifix; Size: C Tailstock Quill diameter: 80 mm Quill stroke: 180 mm Quill taper: MT5 Dimensions L x W x H: 2900 x 1953 x 1825 mm Weight: 2700 kg SCOPE OF DELIVERY Including (not limited to): - Gildemeister lathe - SMW Autoblok Hi-Grip high-precision chuck - Chuck jaws - Multifix tool post - Complete operating documentation - Full scope of supply as per photo documentation We accept no liability for the correctness, completeness or currentness of the information provided.

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Centre height: 195 mm, centre distance: 1250 mm, turning diameter over bed/chuck/in bed gap: 400 mm/245 mm/585 mm, spindle bore: 54 mm, spindle speed: 2500 rpm, power: 7.5 kW, rapid traverse cross/longitudinal: 1.5 m/3 m/min, tailstock quill: MT5. Machine dimensions X/Y/Z: approx. 2600 mm/1500 mm/1600 mm, weight: approx. 1800 kg, control: GE Fanuc. Documentation available. On-site inspection possible. Ksdpjua E Txefx Af Njll

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Ciklično vodeni stružnica GILDEMEISTER NEF 320 Z upravljalnikom MANUAL PLUS 4110 Kledpfx Ajxn Apbsf Nol Leto izdelave: 2002 Vrtina vretena: 50,8 mm Razdalja med konicama: 750 mm Premer nad ležiščem: 320 mm Premer nad sani: 150 mm Višina konice: 160 mm Območje vrtljajev: 10 – 4000 vrt/min brezstopenjsko Z naslednjo dodatno opremo: Zaščitni drsni pokrov z notranjo osvetlitvijo Držalo za orodje Multifix z 2 vložkoma Tročeljustna glava Schunk ROTA – S plus Ø 200 mm 2 kompleta mehkih čeljusti ICP programsko določanje konture Konjiček z izvlečno vrtalno pušo Posoda za odrezke Naprava za dovajanje hladilne tekočine Pištola za izpiranje odrezkov 6 kos strojevnih nogic Navodila za uporabo

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Distance between centers: 850 mm Longitudinal travel (Z axis): 900 mm Cross travel (X axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x stepless rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X axis): 8 m/min Longitudinal travel (Z axis): 10 m/min Operating hours (machine on): approx. 34,600 h Tailstock taper ISO: MT 5 Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions approx. (LxWxH): 2.2 x 3.2 x 1.9 m Multifix toolholder size C 3-jaw chuck Ø 250 mm Kledpfowtct Hox Af Nol Chip tray Manual hour counter Live center in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with internal jaws Various chuck keys Machine lighting 8x leveling pads 4x wedge lifters Various pairs of jaws 1x steady rest Ø 100 mm, closed type

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, • Krmiljenje FANUC 210i - T (cikli) Ksdpfx Afjw S E R Re Njll • Največja razdalja med konicama: 1.250 mm • Največji premer vrtenja: 400 / 585 mm v poglobitvi • Hitrost vretena: 12 . . . 2.500 o/min • Premer vretena: 54 mm • X-os: 210 mm • Z-os: 1.181 mm • Nastavitev reza: 0,05 – 0,8 mm • Moč motorja: 7,5 kW • Teža pribl. 2.700 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Swing diameter 330 mm Turning length 750 mm Control WEILER D3 Quill diameter 50 mm Quill stroke 130 mm Kjdox Szpwepfx Af Nell Tailstock quill taper MK-3 Spindle speeds 1-4500 rpm Main spindle taper MK-5 Machine weight approx. 1,400 kg Space requirement approx. 1,900 x 1,300 x 1,800 mm This WEILER E30x750 is in very well-maintained condition and can be inspected at the seller's premises by prior arrangement. - Lever-operated quick-change chuck for collets according to DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4,500 rpm. - 1 set of collets according to DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle - Traveling steady rest with sliding jaws, through-hole 10-85 mm - Three-jaw chuck with wedge bar system, diameter 160 mm, bore 42 mm, mount according to DIN 55027 size 5, including 1 set of master jaws and 1 set of reversible hard top jaws - Lever-operated quick-change chuck for collets according to DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4,500 rpm. - 1 set of collets according to DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle