Avtomatska stružnica

Hanwha XD20II-M Fanuc FMB 2-20 turbo

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard Rsdpfjlz Rvlox Amfocf X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 31.411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine This punch-laser combination machine allows the flexibility of laser cutting to be combined with the advantages of punching. The simultaneous application of these two cutting technologies opens up numerous new possibilities: even complex sheet metal components can be produced. Technical Data - Punching force: 165 kN - Maximum sheet size (X, Y): 2500 mm x 1250 mm - Maximum sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 to M8 Rcodpfoycuypex Amfsf - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (for MultiTool): 2.2 s - Positional accuracy: ± 0.1 mm - Repeat accuracy: ±0.03 mm For optimum surface quality of the sheet metal components, the machine is equipped with a brush table and rollers around the forming tools. The MultiTool tool holders can accommodate up to 180 different forming tools. Thanks to shorter production cycles and lower energy consumption, the laser-punch combination machine enables lower part costs compared to flatbed laser cutting systems, ensuring greater economic efficiency. This equipment is ideal for the efficient, high-volume production of complex sheet metal parts. The laser cutting head allows for the cutting of intricate shapes, creates high-quality edges, and can be used when the required profile punching tool is not available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, CNC stružnica z osjo C Rcedpsyz Stlsfx Amfof MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Proizvajalec: MAZAK Tip: QUICKTURN NEXUS 250-IIM Krmiljenje: Mazatrol Matrix Nexus Letnik: 2008 Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po našem najboljšem znanju in, kjer je bilo mogoče, od proizvajalca. Podatki so posredovani v dobri veri, vendar točnost ni zagotovljena. Ne predstavljajo jamstva ali pogodbenih pogojev. Priporočamo, da preverite vse ključne informacije.

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm Rcodoytcf Ujpfx Amfef C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. *

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 32 mm - Travel Path: 240 mm - Spindle Speed: 8,000 rpm - Spindle Drive Power: 7.5 kW - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 32 mm - Spindle Speed: 6,000 rpm BUSH HOLDER 1 - Number of Positions: 5 BUSH HOLDER 2 - Number of Positions: 5 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm FRONT TOOL POST - Number of Positions: 4 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm BACK WORKING STATION - Number of Positions: 7 - Number of Powered Positions: 3 - Driven Tool Speed: 6,000 rpm ELECTRICAL SUPPLY Rcsdpfx Aouhax Ejmfsf - Supply Voltage: 400 V MACHINE HOURS - Operating Hours: 56,433 h ACCESSORIES - Control System: Fanuc - Tool Drive Motorization at: S2, S3, S5 V+H - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 210 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 8 - Number of live/tool-driven stations: 3 - Driven tool speed: 8,000 [rpm] TOOL HOLDER 2 Rsdpfx Amsuha Nwefocf - Number of stations: 5 - Number of live/tool-driven stations: 2 - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of stations: 5 BACKWORKING - Number of stations: 4 - Number of live/tool-driven stations: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Spindle hours: 18,849 [h] EQUIPMENT - CNC control: Fanuc 31i-Model A - Live tool drive on: S11, S21, S51 - Driven guide bushing - Parts removal unit - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 20 [bar] - Bar feeder: TORNOS SBF320 - Electrical transformer - Number of live toolholders: 5 - Double drilling/milling toolholder: 1

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Rcsdpsvldx Aofx Amfef Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Deli, prikazani ročno, niso priloženi. Ob stroju so priloženi nosilci orodij SK 40. X 600 mm; Y 430 mm; Z 460 mm; A 150° x 0,001; C 360° x 0,001. 12.000 vrt/min, Heidenhain iTNC 530, 40 mest za orodje v menjalcu SK 40. Rodpjlpcdwofx Amfjcf

Stanje: rabljeno, Leto izdelave: 2001, STAR vzdolžni stružni stroj S16-R, letnik 2001 naprej. Vzdolžni stružni stroj SA16-R, Ø16mm z magazinom FMB Minimag. Odbirno vreteno. Transportni trak za dele. Hladilni sistem je deloval samo z oljem. Brez transporterja za ostružke. Rsdpfoxmurrox Amfocf

Stanje: rabljeno, Leto izdelave: 2007, Na prodaj je izsekovalni stroj Amada EMK 3610NT skupaj z nakladalno enoto MP300. Stroj želimo prodati v kompletu z orodjem in brusilnim strojem Wilson X-Sharp. Standardna orodja so navedena v priloženem seznamu, ki ga lahko pošljem po e-pošti. Rcsdpfx Amsw Hww Hsfsf