CNC stružnica švicarskega tipa

HANWHA STL 32 H

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ST-32-BG-0093, največja hitrost vretena: 8.000 obr/min, premer struženja: 32 mm, skupna masa: 3.900 kg, potovalna razdalja osi X: 3.742 mm, pomik osi Y: 1.729 mm, pomik po osi Z: 1.800 mm, TECHNICAL DETAILS Year of manufacture: 2011 CNC: Siemens Kdodowwqztspfx Af Tsg MACHINE DETAILS Model number: ST L32H Serial number: ST-32-BG-0093 Rated voltage: 3-phase, 220-240/380-415 V AC Rated frequency: 50/60 Hz Maximum spindle speed: 8,000 rpm Maximum machining diameter: 32 mm Dimensions: 1,964 mm x 1,290 mm x 1,800 mm Weight: 3,000 kg EQUIPMENT Bar feeder: FMB Turbo 3-36

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.150 mm, skupna masa: 12.000 kg, premer vrtanja: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical data: Travels: X-axis longitudinal (table): 1800 mm Kdodpfxjwcldas Af Teg Z-axis cross (column): 1700 mm W-axis cross (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, please refer to the photos.

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Kdsdpfx Afevivx Nj Tjg Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.650 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 Kdodpfekhnqgjx Af Tog with LNS bar loader Fanuc 31iB - 5646 hours Country of manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Max bar diameter: 16 mm Max machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Max bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of stations: 5 Number of driven stations: 3 Driven tool speed: 8,000 rpm Tool set 2 Number of stations: 5 Number of powered stations: 3 Driven tool speed: 8,000 rpm End unit Number of stations: 4 Number of powered stations: 3 Driven tool speed: 8,000 rpm Counter operations Number of stations: 6 Number of driven stations: 6 Driven tool speed: 8,000 rpm Electrical supply Mains voltage: 400V All technical data is provided without obligation and is subject to errors or prior sale.

Stanje: rabljeno, Leto izdelave: 2011, Bar diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Sub-spindle: Pick-up station: 32 Turning length: 150 mm Spindle speed: 8,000 rpm C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control unit: Mitsubishi M70 Number of axes: 5 + 2x C-axis (7 total) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB CNC sliding head lathe Citizen A32-VII PL, year of manufacture 08/2011 with FMB Turbo 3-36 bar feeder Kedpfsw Ed Tfox Af Tedg Very good condition! Main spindle motor and bearings are new. Includes all accessories, clamping devices, manuals.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, SIEMENS 840D SL control system Travel paths: 550 x 320 x 420 mm Swiveling milling head: +100 / -10° Spindle taper: HSK A50 Spindle speeds: up to 12,000 rpm Tool changer: 64 positions Rotary spindle: 4,500 rpm NC swiveling rotary table with B and C axes Kjdjwwundopfx Af Tsdg Tool breakage monitoring Tool length measuring device 3D probe Various accessories MARCELS MASCHINEN CH

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Kdsdpfxsv Scrbs Af Tog

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: SK 40 - Spindle drive power: 12 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 510 x 510 x 460 mm Kdodpfx Asuhbr Hjf Tjg SWIVEL AXIS A - Travel: [degrees] - Minimum increment: 0.001° SWIVEL AXIS B - Travel: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 40 TABLE - Table size: 400 x 400 mm - Max. table load: 300 kg - Max. machinable diameter: 500 mm - Max. machinable height: 405 mm PALLET CHANGER - Pallet size: 400 x 400 mm - Number of pallets: 2 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 50 kVA WEIGHT AND DIMENSIONS - Machine weight: 11,500 kg MACHINE HOURS - Operating hours: 32,763 h EQUIPMENT - Control: Mazatrol PC-Fusion 640 - Teach-in programming - Interfaces: RS232/RJ45/PCMCIA - Synchronized thread cutting - Coolant tank * with high-pressure pump: 15 bar - Through-spindle coolant supply (IKZ) - Spindle cooling - Chip conveyor: MAYFRAN - Tool measuring probe

Stanje: dober (rabljeno), Leto izdelave: 2019, številka stroja/vozila: XD-38II-CP-0703-H, premer struženja nad prečnim suportom: 38 mm, največja hitrost vretena: 6.500 obr/min, premer struženja: 38 mm, izvrtina vretena: 39 mm, moč: 7,5 kW (10,20 KM), The machine can be inspected at our location in Immendingen by prior arrangement. Included are the original chip conveyor and a FMB 3-36 turbo bar feeder. Also included: Büchele SFB-301 high-pressure unit, 150 bar, 4 valves. Kdodpfxevtmale Af Tsg

Stanje: dober (rabljeno), The following listed driven tools VDI 50 are suitable for a SAUTER tool turret and are in good condition and fully functional, having been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight design, brands NACKE + WTO, VDI 50 for SAUTER tool turret: Item no.: XVI 24275 1 drilling/milling unit, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Kdjdpfx Ajbql S Hef Tjg Price: €545.00 plus statutory VAT. Item no.: XVI 24277 1 drilling/milling unit, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel