Viličar široke šine z visoko dvigalo, peščen viličar, viličar z ojesom; širokoltirni viličar, elektr

HANSELIFTER - Hanse-Lifter E-SDJ1016-01

Stanje: novo, Leto izdelave: 2025, Maszyna CFM-01 do cięcia profili Gijdpfxofwxxno Afqel Maszyna została zaprojektowana do cięcia profili stosowanych w przewodach i kształtkach wentylacyjnych typu P20 lub P30. Charakteryzuje się bardzo wysoką jakością cięcia – po cięciu nie powstają żadne zadziory. Cięcie może być wykonywane na dowolną długość dzięki przykładnicy regulowanej w zakresie od 0 do 1500 mm. Zastosowana tarcza diamentowa wyróżnia się znacznie dłuższą żywotnością w porównaniu z piłami taśmowymi. Maszyna wyposażona jest w system siłowników pneumatycznych odpowiedzialnych za ruch tarczy oraz docisk materiału. Dzięki sterowaniu pedałem nożnym zapewnia szybkie i wygodne cięcie profili.

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Spectral range: 1600-2400 nm Pixel pitch: 8 nm Gsdpfxen Arm To Afqeil Optical resolution: 11 nm Stray light

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Gsdsqt Dmyjpfx Afqeil Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Gedogulr Hopfx Afqeil Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Our machine is constructed as a monoblock body, welded from ST42 quality material. The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. Gijdpfxsfv H Dke Afqjl (Documentation available in English only)

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: UP 20_LIND, Used Motoman HP20 Model: HP 20 Controller: NX100 Year of manufacture: 2004.09 Giodpfx Afefd Drrjqjl Payload: 20 kg

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m Gsdsfg E Hlopfx Afqeil SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar Giedpfx Afogp Diasqol c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: novo, Pressing force: 40 t Bending length: 1270 mm Clearance between uprights: 980 mm Throat depth: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions (L x W x H): approx. 1950 x 1450 x 2100 mm Weight: approx. 3,200 kg Accessories / Special Features: • Manual control for the motorized immersion depth and backgauge o Ball screw spindles o Fine adjustment via handwheel • Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, lightly offset, R=0.8 mm, pressing load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backgauge with ball screw spindles, length = 600 mm • Only one working speed of 10 mm/s for all vertical movements, therefore no light curtain required! • Front support arms • Pendant control panel • Paint finish: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033 • Operating manual Godpfxegiud Hs Afqeil • CE compliant Delivery time: approx. 2–3 months after order receipt plus pre-carriage costs from China to Germany Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151–153 D - 44143 Dortmund - Wambel

Stanje: novo, Saw blade diameter 315/350 mm Gisdpfed Iin Tsx Afqsl Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160x90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80x100 mm Total power requirement 1.8/2.5 kW Machine weight approx. 0.2 t Space requirement approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts left and right up to 45°, end stop at 90° and at 45° left • For cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vise with quick-clamping lever, longitudinally adjustable jaw, adjustable guide, and double clamping arm for burr-free cuts • Cone safety clutch made of hardened steel to protect the saw blades • Large base plate made of solid cast iron for maximum stability and vibration-free sawing • 2 speeds: 30 + 60 rpm • High-performance special gearbox with elastic coupling for heavy-duty applications • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in handle with restart interlock • Length stop, assembly tools ATTENTION: Price does not include saw blade!!!