Visokotlačna črpalka 440bar 92l/min

Hammelmann HDP 122

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, številka stroja/vozila: B6.01122.2949, skupna širina: 2.000 mm, skupna dolžina: 850 mm, skupna višina: 1.400 mm, pritisk: 460 letvica, obratovalni tlak: 460 letvica, vrsta vhodnega toka: trifazni, skupna masa: 1.698 kg, največja hitrost vrtenja: 1.800 obr/min, moč: 0,089 kW (0,12 KM), Stationary high-pressure pump unit Hammelmann HDP 122 on a base frame. Similar to but not a Kamat, Uraca, or Woma. Pump type: HDP 122 Operating pressure: 460 bar Flow rate: 104 l/min Drive speed: 1800 rpm Drive power: 89 kW Fitted with ACM 315 S-4/PHE electric motor, 110 kW, IP55 Equipped with pressure regulating valve, safety valve, including oil cooling system. Dimensions (LxWxH): approx. 2,000 x 850 x 1,140 mm Weight: approx. 1,698 kg Year of manufacture: 2016 Condition: In very good used condition. 2 units available. Ijdpfsqhnrhox Af Tjht

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 37 kVA, vrtilni moment: 236 Nm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: iTNC530, širina mize: 700 mm, dolžina mize: 1.700 mm, obremenitev mize: 700 kg, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 9.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 16.580 h, moč vretenovega motorja: 37 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3-axis CNC machining center, Heidenhain iTNC530 X-axis travel: 1500 mm Isdpfxsvz Tyue Af Toht Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Through spindle coolant: 20 bar Chip conveyor Manual pulse generator (handwheel)

Stanje: novo, Leto izdelave: 2025, The drill-milling machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. Various accessories can be mounted on it. HEAVY DUTY, STABLE CAST IRON CONSTRUCTION THE MILLING HEIGHT IS ADJUSTED VIA THE SUPPORT, NOT THE COLUMN ROBUST, HIGH-PRECISION CROSS TABLE FOR MILLING/DRILLING, PRECISELY GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION DUE TO GROUND GEAR WHEELS LEFT AND RIGHT SPINDLE ROTATION ROTATING HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Machine base available as an option – 200€ Technical data MAX. DRILLING CAPACITY: 45 mm MAX. FACE MILLING: 80 mm MAX. CYLINDRICAL AND FACE MILLING: 28 mm MAX. THREADING: 12 mm SPINDLE TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min-1 MAX. DISTANCE SPINDLE END TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options available): 400V (three-phase motor) PACKAGING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available accessories MK4/B18 drill chuck arbor Service tools Drill chuck 3-16 mm/B18 Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual in Polish Ijdpfxsud H Hus Af Toht

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 18.000 kg, dvižna višina: 11.900 mm, vrsta goriva: električni, tip droga: teleskopski, gradbena višina: 1.990 mm, lastna masa: 21.650 kg, skupna dolžina: 5.540 mm, vrsta pogona: Elektro, gradbena širina: 2.000 mm, Pick & Carry Kran Masttyp: Teleskop Isdpfjt Dd Uwjx Af Toht Technischer Zustand: gut Vorderreifen Typ: Non Marking Hinterreifen Typ: Non Marking Fernbedienung

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno),

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije. Ihjdovtancepfx Af Tot

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 104.242 km, prva registracija: 04/2018, vrsta goriva: dizel, konfiguracija osi: 8x4, medosna razdalja: 3.900 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 500 l, zavore: zaviranje z motorjem, barva: modra, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2018, Oprema: ABS, AdBlue, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, klimatska naprava, meglenke, navigacijski sistem, spojka prikolice, spojler, tempomat, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low-noise operation - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Radio/cassette player - Reversing camera - Sun visor - Stability control - Toolbox - PTO (power take-off) - Central lubrication - Towing jaw = Further Information = Technical information Number of cylinders: 6 Engine displacement: 12,809 cc Unladen weight: 23,000 kg Axle configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; steered Functional Body manufacturer: RSP ESE 6 RD 8000 Condition Technical condition: very good Visual condition: very good Financial information Price: On request MERCEDES-BENZ AROCS 3251 8X4 TRIDEM RSP ESE 6 RD 8000 VACUUM EXCAVATOR EURO 6 L PACKAGE 510 HP DRIVE 8X4 TRIDEM LAST AXLE LIFTED AND STEERABLE WHEELBASE 390 CM AIR SUSPENSION AROCS CAB WITH AIR CONDITIONING NAVI CAMERA DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION TRAILER COUPLING RSP VACUUM EXCAVATOR TYPE: ESE 6 RD 8000 DUAL TURBINES!!! HYDROSTATIC DRIVE WITH REMOTE CONTROL Ihsdpfx Afouxvc Dj Tot POWER BOOM WITH ROTATION HEAD TANK 8M3 WATER TANK 200L CENTRAL LUBRICATION 2X RADIO REMOTE CONTROLS EXTRA HIGH-PRESSURE PUMP UNIT WITH HOSES AND GUN ADDITIONAL AIR VALVES AT THE REAR OF THE TRUCK FOR OPERATING AIR TOOLS SUCH AS A HAMMER COMPRESSOR 2588 HOURS FAN 336 HOURS ALL AVAILABLE MANUALS AND SERVICE BOOKS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Stanje: novo,

Stanje: rabljeno, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i-T ASA 5 Main spindle power: 15 kW Self-centering chuck diameter: 175 mm ASA 5 spindle mount Bar capacity: 52 mm Turning diameter: 230 mm Turning length: 500 mm Max spindle speed: 5000 rpm Number of tool turrets: 1 Number of tool stations in first turret: 12 Number of driven tools in first turret: 12 First turret tool mounting type: VDI 30 X axis travel: 160 mm Y axis travel: +/- 32 mm Z axis travel: 550 mm Rapid traverse (X/Y/Z): 30 m/min Ihsdpfxoqn E U Tj Af Tst Sub-spindle: yes ASA 5 spindle nose Max sub-spindle speed: 5000 rpm Sub-spindle power: 9 kW Sub-spindle bar capacity: 30 mm Bar feeder make and model: LNS with single guide tube Chip conveyor: belted Presetting: yes Year: 2000 The machine is available under power in our warehouse in Gussago (BS), Italy. Mimu Machine Tools Italy

Stanje: rabljeno, Leto izdelave: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, spindle speed: 60-6000 rpm, Number of tool stations: 60, tool magazine: BT 50, drive power: 22/26 kW, Grid size: 250 mm, control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, width: 3300 mm, height: 3800 mm, weight: 25 t, equipped with High Precision Contour Control, Central lubrication system upgraded (2005), axes (X-Y-Z) upgraded to linear scales (0.001), Memory expansion 128 Kbyte, tool correction memory (200 pcs.), High Speed Remote Buffer, Extraction via HEPA filter system, upgraded to high-pressure internal coolant supply 20 bar and zero-point clamping system with 16 chucks each. Iodpfjrw Dknjx Af Teht