Cestna čistilnica

Hako Citymaster 2000 3 Besen- 4 Radlenkung-Hecksauger

Stanje: rabljeno, obratovalne ure: 10.420 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ES2234, prevoženi kilometri: 74.155 km, moč: 75 kW (101,97 KM), prva registracija: 05/2016, skupna masa: 4.900 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x2, največja dovoljena obremenitev: 1.900 kg, lastna masa: 3.000 kg, naslednji pregled (TÜV): 01/2027, gorivo: dizel, voznikova kabina: dnevna kabina, vrsta prenosa: hidrostat, emisijski razred: Euro 5, Oprema: filter saj, hidravlika, nizka raven hrupa, * Hako Citymaster 2000 suction-sweeper * Single ownership / former municipal vehicle * Registered as a self-propelled work machine, 50 km/h (exempt from environmental badges) * Upon request, we will provide a complimentary full engine service upon sale, including timing belt, water pump, oil, and filters * New disc brooms * Low-emission Euro 5 * 7,299 working hours * 10,420 total operating hours * 74,155 kilometres * VW 2.0 TDI industrial engine (4-cylinder) * Diesel particulate filter Cgedpfxsmnp Afs Afdew * Reversing camera * Switchable all-wheel steering * Adjustable sweeping width from 140 cm to 260 cm * Fresh and recirculation water pumps * 350-litre fresh water tank * Tiltable stainless steel debris container * ISRI suspension driver's seat * Yellow rotating beacon * Ready for immediate use --- We sell exclusively under our terms and conditions, excluding any warranty. Subject to errors, modifications, and prior sale. --- * We are available Monday to Friday from 9:00 am to 5:00 pm without interruption, Saturdays by appointment. Outside these hours, telephone arrangements are possible. * We gladly accept your current used machine/vehicle as part exchange. * Priority is given to sales to traders and exporters—this applies to our entire vehicle stock. * All information provided is non-binding. Subject to errors, modifications, and prior sale.

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 2.783 h, prevoženi kilometri: 13.117 km, skupna masa: 4.800 kg, vrsta goriva: električni, obratovalna teža: 4.800 kg, največja dovoljena obremenitev: 1 kg, lastna masa: 3.100 kg, velikost pnevmatike: 215/75 R16, skupna dolžina: 5.280 mm, stanje pnevmatik: 85 odstotek, velikost sprednje pnevmatike: 215/75 R16 | 85%, velikost zadnje pnevmatike: 215/75 R16 | 85%, največja hitrost: 50 km/h, Tyres (front): 215/75 R16, Tyres (rear): 215/75 R16, Operating hours: 2783, Battery: Li-ion 63 kWh, Width: 1300 mm, First registration: 02.11.2021, Charger: Integrated 22 kW, self-propelled Standard equipment CityCat V20e fully electric: Cab: Comfortable, sprung and sound-insulated aluminium cab. Front windshield made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heating blower, sun visors, windscreen wiper with washer system. Individually adjustable, sprung driver's seat with headrest and 3-point seat belt. Steering column adjustable for angle and height. Chassis: Two-part ladder frame chassis in "C" profile construction. Independent wheel suspension with shock absorbers and coil springs on the front axle, and leaf-spring with shock absorbers on the rear axle. Cgedpfjiwwghsx Afdew Axles and Steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing hydraulic steering. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions, as well as broom drive at the front and sides. Brakes: Hydraulic servo dual-circuit brake system with disc brakes on front and rear axles. Parking brake (spring-loaded brake) acting on the front axle. Drive: Working speed 0-15 km/h; Driving speed 0-50 km/h; Climbing ability up to 30%; Electric traction drive 88 kW; Electric blower 8.5 kW; Electrohydraulic unit 12 kW. HV Battery: Battery type: Li-ion; Battery capacity: 63 kWh; Rated voltage: 335 V; Operation time up to 10 hours. Charging system: Integrated charger 22 kW; charging connector type 2; charging time 2 to 3 hours. Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control. Hydraulic system: Hydraulic unit with low-noise gear pumps for blower, steering, auxiliary functions, and broom drive at the front and sides. On-board voltage: 12 V electrical system, battery 95 Ah. Hydraulic servo dual-circuit braking system with disc brakes on the front and rear axles, spring-loaded (parking) brake and manual brake valve acting on the front axle. Tyres: 4 wheels with 215/75 R16C M+S. Dimensions: Length 4200 mm; Width 1300 mm; Height 1999 mm; Wheelbase 1900 mm; Track width 1090 mm; Sweeping width 2100 mm; Sweeping width with third broom 2700 mm. Special equipment: - Lithium-ion NMC battery, 63 kWh, 335V - RAL 9016 white - Suction hose, 4 m long (incl. suction tube), diameter 120 mm, with Storz couplings and hydraulic shut-off flap - Third front disc broom - Brush diameter 800 mm, with front arm, swivels left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment on both side brushes - Side adjustment of both side brooms, infinitely variable hydraulic adjustment of each broom individually - Easy clean quick cleaning system for cleaning the KGB side walls, recuperation and leaf grid - Hydraulic side broom contact pressure regulation for both side brooms with single-side broom lift, combined - Radio DAB+ with CD MP3, Bluetooth, microphone - Heated exterior mirrors

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 6.580 h, prevoženi kilometri: 61.850 km, Oprema: klimatska naprava, Very well-maintained "Schmidt" Swingo 200+ sweeper, single-owner! (V223) Previously owned by the city of Kropp, we are pleased to offer you this excellently equipped sweeper from the world-renowned brand "Schmidt", model Swingo 200+. The sweeper was commissioned in 08/2016 and is in an all-round well-kept condition – it is virtually rust-free, and both visually and technically in good shape. Features include a three-brush system, all-wheel steering, air conditioning, rear-view and suction mouth cameras, and a nozzle water spraying system. Csdpfetz Dhxjx Afdogw The tires have been replaced, and a service with oil change and new coolant for the air conditioning was conducted in 09/2024. The entire system is in good condition both visually and technically; there are no significant damages, and everything functions as it should. Normal signs of use such as scratches, paint chips, and scuffs are naturally present but in no way reduce operational capability – see pictures. The vehicle has a total mileage of only approx. 35,250 km or 4,630 operating hours. The sweeping distance is approx. 6,100 km or 3,780 sweeping hours. The engine has a total of approx. 6,580 engine hours. Shipping is carried out within three working days after receipt of payment, insured by forwarding agent – you also have the option to collect the machine during regular opening hours. The total system weight including accessories is 3,500 kg. This sale is exclusively intended for commercial customers; you will, of course, receive an invoice, but without VAT shown due to public sector ownership. Private buyers may purchase the machine “on behalf of a customer”; no direct commercial sale to private individuals will take place! The item is sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breaches of duty by the seller or for any injury to life, limb, or health. For price inquiries or technical details, please do not hesitate to contact us at the address provided.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 3.597 h, prevoženi kilometri: 66.228 km, vrsta goriva: dizel, lastna masa: 18.000 kg, Operating hours: 3,597, First registration: 23.06.2016, self-propelled Standard Basic Equipment: Fan Unit - Fan drive hydraulically powered via chassis-mounted, transmission-independent PTO (semi-hydrostatic drive) - Hydraulic fan drive - Hydraulic oil tank, 50 l - Engine compartment lined with soundproofing material - Fan exhaust air directed upwards through the front tank assembly - Hydraulic pump, single Sweeping Debris Container - Sweeping debris container (with rear door and screen) and water tank made of 1.4003 chrome steel Cgedpfxjfy Am Uo Afdew - Engine compartment cladding normal steel - Sweeping debris container gross volume: 6.5 m³ - Sweeping container floor made of chrome-alloyed stainless steel, 1.4301 - Sweeping debris container tipping angle approx. 55 degrees - Waste chute made of chrome steel, 1.4003 - Observation flaps left and right - Dirty water drain 4", A-coupling - Air guide screen, manually foldable - 2 rotating beacons at rear on the sweeping container - Air shut-off valve on suction hose, pneumatically operated - Multi-stage safety prop, pneumatically operated - Marker lights on container rear, side marker lights - Integrated water tank - Preparation for rear suction hose boom or roof-mounted option - Side marker lights Sweeping Pick-up System - Wear-resistant coated pick-up - Coarse collection by tilting suction mouth - Suction hose diameter: 250 mm - Disc brushes, pushed - Hydraulic drive disc brushes, steel - Disc brushes, steel, 500 mm diameter pulled - Infinitely variable speed control for disc brushes - Two robust swiveling trailing wheels - Automatic lifting of sweeping assemblies during reverse travel - Work lights for the sweeping unit Roller Brush - Roller brush suspension, pulled - Brush length: 1,300 mm, brush diameter: 406 mm with synthetic bristles (chassis dependent) - Hydraulically driven roller brush - Swirl limiter curtain for roller brush unit Water System - Water tank volume approx. 1,554 l - Water tank made of 1.4003 chrome steel with coating - Water level indicator in driver's cab - Water fill device, Storz C (2"), right side - Manual water fill device, right and left - Water pump, hydraulically driven - Automatic water stop when sweeping assemblies are raised - Spray water connector, 3/4", rear right - Water blow-out system - Electric water valves in driver's cab - 2-nozzle low-pressure spray bar at the front Instrument Cluster and Control Panel - Bucher instrument cluster, incl. 7" color display - Ergonomic control unit, mounted on driver's door, fitted with main functions - Display includes: water level indicator, operating hours, and rear axle load - Warning and control lights for rear axle load - Control unit for regulating broom contact pressure (broom relief), infinitely variable disc brush speed control - Electric valves for water system, operated in driver's cab - Operation of the debris container functions via cable remote control from the driver's cab, also operable externally - Operation of the air guide screen, rear right on the vehicle - Overload indicator for rear axle load, warning lamp in display (option)

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja višina reza: 125 mm, • 125 mm višina reza • 750 mm prehodna širina Csdpfx Afew Slwkodegw • Žagalna gred na novo ležajena • 18,5 kW pogonski motor • 1 fiksna puša • 1 letvena puša pribl. 300 mm uporabne vpenjalne dolžine • 1 nastavljiva puša • 50 mm premer žagalne gredi • Mehansko nastavljanje višine zgornjih valjev • Vibracijski žleb v stroju • 10 ukrivljenih žaginih listov • 0–50 m/min brezstopenjska podajalna hitrost • Stroj pregledan v delavnici • Stroj na novo prebarvan • Pribl. 5 m dolg valjčni transport pred žago • Pribl. 4 m dolg valjčni transport za žago

Stanje: pripravljen za uporabo (rabljen), obratovalne ure: 6.512 h, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 44.264 km, moč: 55 kW (74,78 KM), prva registracija: 04/2016, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: prometno oranžna, konfiguracija osi: 4x4, največja dovoljena obremenitev: 1.500 kg, lastna masa: 2.000 kg, naslednji pregled (TÜV): 05/2026, gorivo: dizel, medosna razdalja: 1.600 mm, voznikova kabina: drugo, vrsta prenosa: hidrostat, emisijski razred: Euro 5, Oprema: dodatne luči, filter saj, hidravlika, klimatska naprava, pogon na vsa štiri kolesa, Hako Sweeper Citymaster 1600, direct from first owner Former municipal / authority vehicle 3-brush sweeping system Side arm with weed control function Registered as self-propelled working machine (40 km/h) Major engine service with timing belt, water pump, oil, and filters will be performed before sale 6,512 total operating hours Cgedpfx Asyf Hihefdow 3,767 sweeping hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Stainless steel debris container Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Gross vehicle weight: 3,500 kg Dimensions (L x W x H): 4,510 mm x 1,210 mm x 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: water-cooled, 4-cylinder VW industrial diesel engine Fuel tank: approx. 60 liters Hydrostatic all-wheel drive system Dual-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min – 225 bar; Circuit 2 (rear) 0–20/25/30 l/min – 195 bar Hydraulic service brake operated via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Additional HAKO attachments available for various applications, such as sweeping brooms, snow ploughs, and lawn mowers (not included in the offer) Subject to errors, alterations, and prior sale. Sales strictly according to our terms and conditions and excluding any warranty. Subject to error, changes, and prior sale. We are available Monday to Friday, 9:00 am – 5:00 pm, continuously. Saturday by appointment – outside these hours, appointments by telephone arrangement are possible. We are happy to accept your used machine/vehicle as trade-in. Sales to commercial customers and exporters are preferred – this applies to our entire vehicle inventory. The information above is non-binding. Subject to error, change, and prior sale!

Stanje: novo, Bore diameter variable, mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Götzinger Power Drill in special design with dowel gluing and insertion station With the Götzinger PowerDrill, depending on the type and configuration, you can: - Drill on face and longitudinal sides - Dowel door leaves, mounting timbers, transoms - Freely program drilling patterns - Drill for handle olives and corner bearings with quick-change multi-spindle drilling heads - Mill and drill lock cases, handles, euro-profile cylinders (PZ), and 3D hinges - The machine is equipped with both horizontal and vertical milling units - Easy control system allows you to create, save, and recall drilling and milling programs POWER DRILL – Drilling and Milling Machine Universal drilling machine for drilling olives, corner bearings, doweling on the face and longitudinal sides, milling, lock cases, hinges, etc. Base frame in robust construction, sheet metal cladding Table support: 1800 x 200 mm Machining unit: X-axis – 500 mm effective travel Y-axis – 100 mm Z-axis – 105 mm 1 horizontal drilling unit (left dowel drilling unit) Drill motor 380 V, 1,100 W Collet chuck d=8/10 4,000–11,000 rpm, adjustable 1 vertical drilling unit from above – fixed mount Drill motor 1.1 kW, 3,000 rpm Quick-change drill head system 1 quickly changeable BKF 2/3 drill head, for corner bearings Includes spare drill bit and customer-specific fittings Control: electro-pneumatic with three axes, NC positioning controller, integrated machine functions Input via TFT 10" color display Machine complete, CE-compliant, with 1 set of drilling tools: Each dowel size 1 x d=6, 8, 10, 14 mm, plus 2 rough cutters d=16 mm, 1 cutter d=20 mm, ready for connection 1 BKF 3 drill head, quick-change, for olives, including spare drill bit, customer-specific fittings 2 drilling units: 1 x horizontal for overhead drilling (for hinges) 1 x vertical for doweling, right side Drill motor 1,100 W, infinitely variable speed 4,000–11,000 rpm with ER 20 collet chuck 2 milling units for lock cases: 1 x horizontal for hinges, lock cases 1 x vertical from above for euro-profile cylinder (PZ), handles, hinges Milling motor 2.2 kW Speed adjustable 3,000–16,000 rpm ER 25 collet chuck 1 length stop, left and right, usable length 2.8 m, NC-controlled When using the length stop, fixed stops are not used. Dimensions: LxWxH = 2.50 x 1.50 x 2.20 m – machine weight 850 kg PowerDrill LxWxH = 0.30 x 0.30 x 6.00 m – length stop weight 100 kg 1 dowel gluing and insertion station consisting of: - Vibratory feeder drive for dowel supply - Dowel insertion station - High-pressure stainless steel glue pump with glue tank - Full jet valve for precise clean glue application - Blow-off nozzle Additional price for 1 dowel diameter This increases the base machine length by approx. 300 mm Cgjdpfx Afod Ih Hyodow (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 2.539 h, moč: 118 kW (160,44 KM), barva: oranžna, lastna masa: 10.500 kg, Operating hours: 2,539, First registration: 06.03.2023_____Basic Equipment CityCat 5006 Driver's Cab: Comfortable, hydro-mount suspended, sound-insulated cab. Front windshield made from heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-level heating fan. Sun visor. Windscreen wiper with washer system. Air-suspended driver's seat and sprung passenger seat, both individually adjustable. Tilt and height adjustable steering column. Clearly arranged and ergonomically positioned controls and monitoring instruments with a 7'' color display. Visual and acoustic warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Steering: Hydrostatic four-wheel steering with hydraulic servo assistance. Axles: Rear axle as a steering drive axle with differential. Front axle with coil springs and shock absorbers. Hydraulics: The latest electronic control concept enables fuel- and noise-optimized control of the diesel engine for a hydrostatic drive over the entire speed range, without loss of power. Brakes: Hydraulic dual-circuit braking system with hydraulic servo assistance. Disc brakes front and rear. Hydraulic spring-loaded parking brake on rear axle. 4 brake calipers at the front and 2 at the rear. Sweeping debris pickup: Suction pickup principle, with trailing, stainless steel suction mouth in front of the axle, together with side brushes hydraulically adjustable laterally by 400 mm. Infinitely variable high-performance suction blower. Debris container: Container volume 5.6 m³, hydraulic tipping and closing. Dumping height 930 mm Dumping height (high-tip) 1550 mm (optional) Dumping width 1700 mm Dumping angle 51° Water system: Water tank approx. 880 l. One water pump for water nozzles. Brooms: 2 brushes left and right Ø 900 mm, infinitely variable speed 0-150 rpm with collision protection. Special equipment: - Standard color RAL 2011 orange - Hydraulic suction pipe flap - Debris screen lifting device for raising and lowering the debris screen in the debris container by hydraulic hand pump - Easyclean, quick cleaning system for cleaning the debris container side walls, blower, recuperation and debris screen - 3rd front brush, reinforced design with linear displacement, tilt adjustment in both directions, adjustable contact pressure, greater reach, larger sweeping area - Leaf suction hose mounted on the side, length 3.5 m, Ø 160 mm, can be mounted on both sides - Fully integrated, CFC-free air conditioning - Wide-angle and main mirrors heated and electrically adjustable Cgedpfxsi Haqhj Afdew - Additional side brush mirror right - Rear view camera and suction mouth camera - Cruise control for improved work ergonomics, increased productivity - Deluxe driver's seat ISRI with headrest, weight adjustment via control valve - Rotating beacon in LED version on cab. Mounted with flexible bracket, can fold down upon obstruction - Rotating beacon in LED version at rear on debris container. With flexible bracket, can fold down upon obstruction - Work lights, left & right brushes, LED - Suction mouth LED headlights - Joystick swap front/side brushes enables switching of joysticks for front and side brushes - Water connection with rinse gun

Stanje: rabljeno, - used spiral roller conveyor - 2 pieces separating slats - 6,000 mm length - 800 mm roller width - approx. 1,000 mm overall width - approx. 150 mm roller diameter - approx. 430 mm roller pitch - SEW feed geared motor Cjdpfx Afow Ag Dzedsgw

Stanje: novo, A device for storing and feeding logs onto a sawmill table. Systematic material feeding to the saw increases its efficiency and eliminates the need for an additional operator. Dimensions: Cgodpowavrcefx Afdsw Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (optionally longer) Log length: 1000–2500 mm Log diameter: 100–400 mm Feed rate: adapted to the intake conveyor LOG FEEDER A device for storing and feeding logs onto the table of a frame saw machine. Targeted material supply to the frame saw improves efficiency and removes the need for additional personnel. Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm Log length: 1000–2500 mm Log diameter: 100–400 mm Feed rate: matched to the infeed