Valjčni stroji za pločevino

Haeusler VRM-HY-N 3100 x 20 mm CNC

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Fodew An Uhjpfx Afxjpc Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp Fpjdpfewudhuex Afxec All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: rabljeno, Leto izdelave: 2008, Used drilling center by CMA Fpjdpfjwc Ndwsx Afxsc Model: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm Fpedpfx Afohzbipexec - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: novo, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiussverschil ----- 50/230 Fpodpfx Aega T E Aefxoc Buigsnelheid/herhaalnauwkeurigheid ----- 230º/s. ±0,05° Doo rstanglengte ----- 1.000–∞ Gewicht ----- 5.000 kg Machineafmetingen ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1.800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten voldoen aan VDMA-, ISO- en DIN-normen OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasonderzoek en buispositionering elektomagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, najv. debelina jeklene pločevine: 16 mm, dolžina rezanja (maks.): 6.000 mm, HIDRAVLIČNE ŠKARJE LVD MVSB 62/16 Serijska številka: 18478 Leto izdelave: 06/1991 TEHNIČNE SPECIFIKACIJE Maks. debelina pločevine St45: 16 mm Dolžina reza: 6200 mm Razdalja med stebri: 6400 mm Izmaknjenost (grlo): 60 mm Območje zadnjega odmika: 1000 mm Min. kot rezanja: 0,5 ° Maks. kot rezanja: 2,5 ° Min. število rezov/min.: 6 Maks. število rezov/min.: 25 Min. zračnost nožev: 0,05 mm Maks. zračnost nožev: 1,6 mm Moč motorja: 30 kW Približna masa: 35.000 kg Fodoumhm Aopfx Afxepc Dimenzije (DxŠxV): 7100 x 2400 x 3000 mm Priložena oprema: - ELGO P85 “GO-TO” krmilnik za zadnji odmik - Električna nastavitev zadnjega odmika do 1000 mm - 1x čelna podpora 2 m, ena s 90° kotno roko, čelna podpora L2000 mm - Nožno stikalo - Kroglični ležaji na mizi - Nastavljiv zadnji odmik z ročno hidravlično črpalko

Leto izdelave: 1981, Stanje: pripravljen za uporabo (rabljen), Working width: 2500 mm, max. sheet thickness: 20 mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable top rolls down to min. Ø 450 mm, machine overhauled in 2009, factory inspection in 2012. Fpodjnvfdbjpfx Afxec

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital position displays Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm Fjdpfxeiffwqj Afxspc All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 - ST 42 structural steel)

Stanje: novo, Leto izdelave: 2025, PROD-MASZ is a machinery manufacturer introducing a completely new standard of equipment quality. We take personal responsibility for every stage of production for our offered machines, ensuring the highest standards and workmanship quality. Our many years of experience allow us to develop durable, reliable, and user-friendly equipment. We place particular emphasis on functionality, operator comfort, and ergonomic design, which has established us as a leader in both domestic and international markets. Fedpfxecntnko Afxspc Model: ZGR-3140/1.0 - Maximum working width: 3140 mm - Bending capacity: up to 1.0 mm (steel sheet) - Maximum bending angle: 145 degrees - Bending beam thickness: 20 mm - Cutting with the rotary shear across the full working width - Upper beam can be raised to three positions - Throat opening: 80 mm - Degree scale - Angle stop - Depth stops - Weight: approx. 560 kg - Rotary shear (maximum cutting capacity up to 0.8 mm / steel sheet) + €350 - The machine complies with CE directives and comes with a 12-month warranty. Delivery cost to Germany: €360.00 Delivery cost to Austria: €360.00 Delivery time: 2-4 days Cash on delivery We look forward to hearing from you!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, Sahinler HPK 200 Hidravlični stroj za upogibanje profilov in cevi Premer osi in vretena: 200 mm Premer orodja in valjev: 900 mm Fsdpfx Afew D Uqxjxepc Delovna hitrost: 2–5 m/min Moč motorja: 30 kW Upogibna zmogljivost x15x4: 273x5,6 / 10.000 mm Največji premer valja: 9"x6,3 / 4.000 mm Premer zgornjega valja: 650 mm Kapaciteta valjanja za profile – 3: 200x200x18 / 5.000 mm Premer vretena: 200 mm Zgornji valj x15 s pred-upogibanjem: min. 120x120 / 3.000 mm Napetost: 3x400 V Delovna hitrost: 2–5 m/min Maksimalna moč: 30.000 W Višina: 2.300 mm Dolžina: 2.400 mm Širina: 3.400 mm Teža: 15.000 kg