Vertikalni obdelovalni center

HAAS VF-2SS

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 5.327 h, potovalna razdalja osi X: 762 mm, proizvajalec krmilnikov: HAAS, model krmilnika: Classic Haas Control, največja hitrost vretena: 12.000 obr/min, število osi: 3, Ta 3-osni HAAS VF-2SS je bil izdelan leta 2014. Opremljen je z naprednimi funkcijami, kot sta merjenje orodja in merilna sonda za večjo natančnost. Z delovnim časom v obdelavi 5327 ur je ta vertikalni obdelovalni center zasnovan za učinkovite procese. Če iščete kakovostne možnosti obdelave, priporočamo, da razmislite o stroju HAAS VF-2SS, ki ga ponujamo v prodaji. Za več podrobnosti nas kontaktirajte. • Notranje hlajenje orodja (IKZ) • Merilna sonda • Merjenje orodij • Konfiguracija osi: 3 osi (X/Y/Z) • Frekvenca: 50 / 60 Hz • Prekinjalna zmogljivost pri kratkem stiku: 10.000 A • Tok kratkega stika: 5.000 A RMS simetrično • Ocena za električni oblok: • 208-240 V AC modeli: HRC-1 • 360-480 V AC modeli: HRC-2 • Čas obdelave: 5327 h Fpsdpfx Aoyux Saohmeh Tehnične specifikacije Hladilna tekočina skozi vreteno: Da

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: Fpodpfx Ahex Hgl Homoh X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Designed for precision machining, it features a robust construction and advanced control technology. If you are seeking high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for further details. Fjdpjyaix Usfx Ahmoph Additional Equipment • Type: Side-Mount Tool Changer (SMTC) / Capacity: 30+1 / Maximum tool diameter (full): 64 mm / Maximum tool diameter (adjacent empty): 127 mm / Maximum tool length: 279 mm / Maximum tool weight: 5.0 kg • Tool-to-tool (average): 1.80 s / Chip-to-chip (average): 2.40 s • Included: HRT210 Machine Highlights Technical Advantages • Torque: 122 Nm at 2000 rpm • Drive system: inline direct drive • Taper: BT40 / CT40 / HSK-A63 • Lubrication: air/oil injection / Cooling: liquid-cooled • Maximum cutting feed rate: 21.2 m/min / Traverse speed on X, Y, Z axes: 35.6 m/min • Coolant tank capacity: 208 L / Coolant through spindle pressure: 21 bar / Tool air blast: yes / Chip auger: yes / Chip tray filter set: yes / Window air blast: yes / Coolant pump: multi-stage • Air consumption: 113 l/min at 6.9 bar / Minimum air pressure: 5.5 bar / Air hose connection: 3/8 inch • Standard interface: Ethernet and Wi-Fi / Control memory: 1 GB / Remote monitoring: HaasConnect / High-speed machining: included / Advanced tool management: included / Media display (M130): included / Power failure detection: included / Safe Run function: included / Rigid tapping: included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Krmiljenje HAAS (LCD zaslon, intuitivno programiranje) Velikost mize 914 x 356 mm Nosilnost mize 680 kg X-hod 762 mm Y-hod 406 mm Z-hod 508 mm Hitrost vretena 12000 vrt/min Hitri pomiki X/Y/Z = 35,6 m/min Orodni magazin 24+1 položajev (ročni tip) Moč 22,4 kW Stožec vretena SK40 Teža stroja cca. 3630 kg Dimenzije (D x Š x V): 2500 x 2400 x 2600 mm Dodatna oprema: - Električni ročni kolesi - Hladilni sistem Fsdey Ifbcepfx Ahmeph - IKZ - Polž za odrezke - RENISHAW infrardeči sistem za merjenje orodja s sondo - Priprava za 4. os - Zaznavanje izpada električne energije - Dokumentacija stroja Stroj je v zelo dobrem stanju in še vedno priključen na elektriko. Kupljen je bil kot nov in uporabljen je bil v čisti in profesionalni delavnici.

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Fpsdpfx Aewx Rafjhmoh Y 400 mm Z 500 mm 10.000 vrt/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 24, število osi: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, a Y-axis travel of 406 mm, and a Z-axis travel of 508 mm. The machine is equipped with a side-mounted tool changer with capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. Fpjdpfoywv Tnex Ahmoh • Country of origin: USA • Certification: CE • Electrical: 440 V, 3-phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short-circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power-on hours: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, washdown gun, LED work light, fully enclosed work area • Condition: very good condition, low operating hours, well-maintained Additional Equipment • Machine vice • Probe Technical Specification Taper Size SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Splošni podatki Teža stroja: 3700 kg Višina: 2800 mm Glavni pogon Hitrost vretena: 12.000 obr/min Moč motorja vretena: 22,4 kW Priklop orodja: BT 40 Število osi: 4 Dimenzije Dolžina stroja: 2700 mm Miza Največja obremenitev mize: 680 kg Pomiki Pomik X-osi: 762 mm Pomik Z-osi: 508 mm Pomik Y-osi: 406 mm Orodja Največja masa orodja: 5 kg To 4-osno vertikalno obdelovalno središče HAAS VF-2SS-EU je bilo izdelano leta 2018. Ponuja pomik v osi X 762 mm, v osi Y 406 mm in v osi Z 508 mm. Opremljeno je z vretenom BT-40, ki doseže do 12.000 obr/min, ter stranskim menjalnikom orodij s kapaciteto 30 + 1 orodji. Hitri pomiki dosegajo 35,6 m/min. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra HAAS VF-2SS-EU. Za več informacij o stroju nas kontaktirajte. Fpjdpfx Ahox D D N Iemjh Uporabna področja Rezkanje

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface of the table: 1100 x 600 mm Table feed: 1 – 3000 mm/min, stepless Fpsdpfx Aheu Nda Eomoh Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Additional technical data: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang, min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control device - Heidenhain linear measuring system

Stanje: potreben popravila (rabljeno), Leto izdelave: 2013, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 1106086, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, širina mize: 356 mm, dolžina mize: 914 mm, The machine's tool changer is defective. The estimated repair costs are approximately €8,000–€10,000. The wear on the axes corresponds to the normal wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Travel X: 762 mm Travel Y: 406 mm Travel Z: 508 mm Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rapid traverse: 35.6 m/min MACHINE DETAILS Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Fodpfx Asw Axkyshmsph Maximum load: 70 A Short-circuit interruption capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetrical Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized tapping 208-litre coolant system with continuous coolant supply 15" colour LCD monitor with USB port

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, obremenitev mize: 680 kg, največja hitrost vretena: 12.000 obr/min, TEHNIČNI PODATKI Pomik X-os: 762 mm Pomik Y-os: 406 mm Pomik Z-os: 508 mm Dolžina mize: 914 mm Fedpfxex Up Dhe Ahmjph Širina mize: 356 mm Maksimalna obremenitev mize: 680 kg Hitrost vrtenja: 12.000 obr/min Pomiki Hitri pomik X-os: maks. 35,6 m/min Hitri pomik Y-os: maks. 35,6 m/min Hitri pomik Z-os: maks. 35,6 m/min Menjalec orodij Kapaciteta: 24+1 Vpenjalo orodja: CAT 40 Maksimalni premer orodja: 76 mm Čas menjave orodja: 1,6 s Čas med orodji (span-to-span): 2,2 s PODROBNOSTI O STROJU Teža stroja: 3.629 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm - Spindle speed range: 20–3,150 rpm, stepless - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Fjdpfx Aexw N S Iehmsph Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.