Vertikalni obdelovalni center

HAAS VF-2SS-EU

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 24, število osi: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, a Y-axis travel of 406 mm, and a Z-axis travel of 508 mm. The machine is equipped with a side-mounted tool changer with capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE • Electrical: 440 V, 3-phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short-circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power-on hours: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, washdown gun, LED work light, fully enclosed work area • Condition: very good condition, low operating hours, well-maintained Additional Equipment • Machine vice • Probe Technical Specification Taper Size SK 40 Pjdpsywv Tnjfx Agxepr

Stanje: dober (rabljeno), Leto izdelave: 2016, Obdelovalni premer 300 mm, obdelovalna dolžina 510 mm, os Y +/- 52,5 mm, premer preko postelje 600 mm, prekrivnost palice 65 mm, hitrost vretena 4.500 obr/min, revolverska glava s 16 postajami, glavni motor vretena 15 kW, rezkanje 6.000 obr/min, os C 0,001°, hitrost dodatnega vretena 6.000 obr/min, os Y +/- 52,5 mm, Fanuc-i krmiljenje Doosan, podpora konice, hladilna tekočina, merilec orodja, lovilec delov, trivrati vpenjalnik, nizkonapetostna luč. Ppjdpfxex Elr Aj Agxjr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Splošni podatki Mere širina 3056 mm Mere dolžina 3994 mm Mere višina 2187 mm Teža stroja 6360 kg Glavni pogon Območje hitrosti vretena 4000 Število osi 5 Ppedex D Sc Nopfx Agxsr Pomiki Pomik X-osi 260 mm Hitri pomik X-osi 30000 mm/min Pomik Y-osi ±50 mm Hitri pomik Y-osi 0000 mm/min Pomik Z-osi 795 mm Hitri pomik Z-osi 30000 mm/min Pomik B-osi 734 mm Hitri pomik B-osi 30000 mm/min Obdelovanec Premer nad posteljo 590 mm Premer nad suportom 360 mm Ta 5-osni stružno-rezkalni center MORI SEIKI NLX 2500 SY/700 je bil izdelan leta 2010 ter omogoča maksimalno nihanje obdelovanca nad posteljo 590 mm in dolžino struženja 795 mm. Stroj vključuje Y- in C-os, pomožno vreteno ter visokotlačni hladilni sistem. Namenjen je za obdelavo palic do premera 80 mm, opremljen je z odrezovalnim transporterjem in avtomatskim podajalcem palic. Izkoristite priložnost za nakup tega MORI SEIKI NLX 2500 SY/700 stružno-rezkalnega centra. Kontaktirajte nas za več informacij. Aplikacije Struženje

Stanje: dober (rabljeno), Leto izdelave: 2012, Deli, prikazani ročno, niso vključeni. X1020mm Y610mm Z610mm 12.000 obr/min, 25 kW, 160 Nm Krmilna enota: HEIDENHAIN iTNC 530, 4. os bo priložena brez delov, prikazanih ročno. Ppodpjx Awzbsfx Agxer

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Ppoderah S Hopfx Agxer Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 3.163 h, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: HAAS, obremenitev mize: 794 kg, največja hitrost vretena: 12.000 obr/min, število osi: 3, Ta 3-osni HAAS VF-3SS je bila izdelana leta 2017 in je opremljena z robustnim CNC krmiljem Haas. Nudi pomik po osi X 1.016 mm, po osi Y 508 mm in po osi Z 635 mm. Stroj omogoča hitrost vretena do 12.000 vrt/min ter hitro pomik 30,5 m/min. Če iščete visoko kakovosten rezkalni stroj, razmislite o HAAS VF-3SS, ki ga imamo v prodaji. Kontaktirajte nas za več informacij. Ppsdpex D I Stefx Agxsr • Delovne ure (prikazano na zaslonu): • Vklop: 25.416 h • Začetek cikla: 8.164 h • Miza: • Velikost: 1.372 × 457 mm • Menjalnik orodij: 30+1 pozicij (bočna montaža) • CNC krmilje: Haas CNC krmilje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Podatki XYZ: 508 x 406 x 508 mm Krmilnik: Haas Pedpjyupmujfx Agxjpr Magazin: 20 mest / SK 40 Število vrtljajev: 10.000 1/min Transporter za odrezke Hladilni sistem Stroj je malo rabljen z dodatno opremo, držala SK 40, omara za orodje z delovno mizo in primežem Almatic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Ppedpfew Hg Nlex Agxjr Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Vrtalna zmogljivost v jeklu (premer): 40 mm Razdalja med vretenom in stebrom: 350 mm Hod vretena: 120 mm Vrtalna zmogljivost v litem železu: 60 mm Vpenjalo vretena: MK 4 Ppodpoviqybsfx Agxsr Izstop vretena: 350 mm Hitrost vretena: 50 - 1450 / 18 stopenj U/min Podajanje: avtomatsko/ročno mm/U Razdalja vreteno/miza max.: 25 - 705 mm Delovna površina mize: 430 x 430 mm Prilagoditev višine vrtalne mize: 680 mm Premer stebra: 150 mm Razdalja od sredine vretena do spodnje plošče: 1210 mm Skupna potrebna moč: 1,6 kW Teža stroja pribl.: 350 kg Mere stroja pribl. DxŠxV: 0,95 x 0,55 x 2,3 m Miza nastavljiva po višini (nagibna in vrtljiva) Miza vrtljiva 45° levo/desno in okoli stebra 360° Navojno rezanje do M24 Hladilni sistem *

Leto izdelave: 1983, stanje: dober (rabljeno), 1 Console Milling Machine Make: RECKERMANN, Model: KOMBI 900, Year: 1983, Serial No.: 6367P, Table size: 1,000 x 310 mm, Travel X/Y/Z: 720 x 220 x 450 mm, Tool holders: SK 50, Heavy-duty machine vice, Ppedpjh E Du Dsfx Agxsr Spindle speeds: 3...2800 rpm