Vertikalni obdelovalni center

Haas UMC-500

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Control: HAAS (LCD screen, 1 GB memory, touchscreen, WiFi) Table dimensions: Ø400 mm Table load: 227 kg Number of T-slots: 5 Hfodpfx Afslaxu Ds Tjb X axis travel: 610 mm Y axis travel: 406 mm Z axis travel: 406 mm B axis: +120° / -35° C axis: 0 - 360° Distance spindle to table surface: 102 - 508 mm Spindle speed: 15,000 rpm Drive power: 22.4 kW Magazine: 50+1 positions Tool holder: HSK-A63 Rapid traverse X/Y/Z: 30.5 m/min Feed rate: 16.5 m/min Weight: 5,400 kg Dimensions (LxWxH): 2,900 x 2,280 x 2,520 mm Accessories & Equipment: - Through-spindle coolant, 69 bar - Coolant system - Additional filtration in the coolant system - Dynamic work offset/tool tip programming - Intelligent power failure protection - Ethernet interface - HAAS Connect, remote diagnostics - HAAS Drop (WiFi data transfer) - High-speed machining - Media display during machining M130 - Synchronous tapping - Overvoltage protection - Chip conveyor - Programmable coolant nozzles - Spindle air blast Two identical machines for sale. Machines are available immediately. Like-new, highly accurate condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Control: FANUC 18i-MB Travel X / Y / Z: 1,020 / 510 / 510 mm Feed rate X / Y / Z: 1 - 10,000 mm/min Rapid traverse X / Y / Z: 48,000 mm/min Table size (W x D): 1,200 x 510 mm Spindle speed: 15,000 rpm Internal coolant: 20 bar Tool holder: BT 40 Tool changer: 48 positions Weight: approx. 7,500 kg Dimensions (W x D x H): approx. 3,100 x 2,200 x 2,900 mm Hours: Spindle hours: 9,310 Hsdpfx Afetz T Sme Tofb Accessories: RENISHAW tool measurement system Type: OMP 40, coolant tank, machine manual, machine lamp, chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2015, Stroj je v dobrem stanju, prikazani deli, ki so prikazani ročno, niso vključeni. X: 1025 mm Hfedpfxjwx N Nfs Af Tob Y: 560 mm Z: 600 mm Heidenhain TNC 620, 16.000 vrt/min, HSK 63

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 650 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC640, Technology: Direct drive Spindle speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 stations Working Area Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Other Features Rapid Traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Coolant filtration: Oil separator Hfedstpm Stopfx Af Teb Control cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40

Stanje: novo, Discover our selection of robust and precise conventional lathes Are you looking for a reliable lathe to boost your productivity? Experience precision and performance with our new range of conventional lathes, complete with extensive accessories. Our machines offer turning diameters from 400–1000 mm and turning lengths up to 10 metres, and are also available as cycle-controlled variants. With various models, you have limitless possibilities. Many machines are in stock and available at short notice! Explore our comprehensive range of special accessories, such as hollow spindles, infinitely variable spindle speeds, Siemens controls, and much more—making your lathe even more versatile. Whether for complex workpieces or demanding applications, our machines always provide the best results. Rely on our many years of experience and let’s optimise your machining processes together. Invest in quality and precision—contact us today! Here is a selection of STOCK MACHINES (see images); on request, we are happy to offer other models or custom-built machines: TECHNICAL SPECIFICATIONS: DLZ Series including BAFA subsidy of 15% and more! Swing over bed: 400–1000 mm Turning length: 1000/1500/2000/3000 mm Spindle bore: 80 (optionally 105) mm Workpiece weight up to 2 t Spindle speed up to 2800 rpm ACCESSORIES: Digital readout, 3-jaw chuck, faceplate, Multifix toolholder, and much more. Extensive SPECIAL ACCESSORIES such as stepless spindle speed, steady rests, larger spindle bores, etc. to make the machine even more productive: Hfoded Afn Ijpfx Af Tjb CURRENTLY AVAILABLE NEW MACHINES with warranty and BAFA subsidy, e.g. - SDM 850: swing over bed 850 mm, turning length 3 m - DLZ 325: swing over bed 650 mm, turning length 2 and 3 m - DLZ 250: swing over bed 500 mm, turning length 1 and 1.5 m - DLZ 200: swing over bed 400 mm, turning length Further models (including cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our services for you: • Consultation and solutions directly at your site • Organisation of transport for your machine to your facility • Delivery, installation, commissioning, and handover ready for operation • Financing and review of grant opportunities through KFW and BAFA, among others.

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Hfedpfx Afedhhpro Tob Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg

Stanje: rabljeno, Leto izdelave: 2019, x-axis travel: 3,400 mm y-axis travel: 3,400 mm z-axis travel: 1,600 mm Control system: CELOS 840D sl Op Siemens Max. spindle speed: 20 – 15,000 rpm Main spindle drive power: 52 / 42 kW Tool holder: HSK-A100 Max. torque: 404 / 280 Nm Tilting range B-axis: -30° / +180° Table dimensions: 2,500 x 2,000 mm Max. table load: 10,000 kg Table rotation speed: 5 rpm Distance spindle center to table, horizontal: 130 – 1,730 mm Distance spindle center to table, vertical: 230 – 1,830 mm Distance spindle nose to table, horizontal: -1,500 – 1,900 mm Distance spindle nose to table, vertical: -1,600 – 1,800 mm Type: 5x rotary / wheel Number of tool positions: 303 Max. tool diameter: 110 mm Max. tool diameter with free adjacent pocket: 280 mm Max. tool length: 900 mm Max. tool weight: 45 kg Tool change time: 7.5 sec Tool holder: HSK-A100 Rapid traverse: 60 / 30 / 40 m/min Total power requirement: 140 kVA Machine weight: approx. 106 t Space requirement: approx. 14.0 x 13.0 x 7.0 m 5-axis CNC large universal machining center DMG MORI - DMC 340 U - 2-position pallet changer - Precision package - MDynamics package (improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Taper cleaning station with rotating brushes - Balluff tool identification - Machine protection through rapid shutdown (MPC) - Laminated safety glass window - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with monitor at control panel Hjdpfxsx H Tt Ds Af Tofb

Stanje: dober (rabljeno), Leto izdelave: 2014, 900 mm premer vrtenja, 650 mm maksimalni obdelovalni premer, 992 mm maksimalna dolžina struženja, Hjdpfowwtrbjx Af Tjfb vreteno do 1000 min⁻¹, premer izvrtine vretena 275 mm, revolver z 10 postajami, vretenski motor 45 kW, krmilje FANUC Series 32i, močanske vpenjalne glave s 3 čeljustmi, konjiček, transporter za odrezke, hladilna naprava,

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Hjdjv Drigspfx Af Tefb Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Hfjdpfx Aeu Ixwisf Tob Accessories: 1x driven tool In standard condition.