Vertikalni obdelovalni center

HAAS Super Mini Mill 2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1148877, Specifikacije Velikost mize: 1016 mm x 356 mm Pomik osi X: 508 mm Pomik osi Y: 406 mm Pomik osi Z: 356 mm Vreteno: BT40 Hitrosti vretena: 0–10.000 obr/min Moč vretena: 11,2 kW Hitrost hitrega pomika: 30,5 m/min Kapaciteta menjalca orodij: 20 orodij Gedpfx Asx Afpgjnfjbl Približna teža: 2313 kg Oprema stroja: Haas CNC krmilje Visokopretočni sistem hlajenja Osvetlitev Popolnoma zaprto ohišje Priročnik

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 24, število osi: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, a Y-axis travel of 406 mm, and a Z-axis travel of 508 mm. The machine is equipped with a side-mounted tool changer with capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. Gbsdsywv Tnjpfx Anfjl • Country of origin: USA • Certification: CE • Electrical: 440 V, 3-phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short-circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power-on hours: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, washdown gun, LED work light, fully enclosed work area • Condition: very good condition, low operating hours, well-maintained Additional Equipment • Machine vice • Probe Technical Specification Taper Size SK 40

Stanje: rabljeno, Leto izdelave: 2008, x-axis travel: 410 mm Gsdpfxsyt R Ido Anfjbl y-axis travel: 570 mm z-axis travel: 140 mm Control: Mazatrol Matrix Maximum machining diameter: 545 mm Maximum machining length: 519 mm Main spindle speed: 35 - 6,000 rpm Tool holder: Capto C6 Rapid traverse (X/Y/Z axes): 30/26/33 m/min Performance / Capacity: Maximum swing: 545 mm Maximum machining diameter: 545 mm Maximum outside diameter for bar work: 51 mm Maximum machining length: 519 mm Maximum workpiece weight: - Chuck work: 150 kg - Bar work: 200 kg Main Spindle: Spindle speed: 35-6,000 rpm Spindle bore diameter: 61 mm Maximum torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (engaged/retracted): 434/281 mm Milling Head: Type: Single spindle with ATC Tool shank type: Capto C6 Tool dimensions: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 mm diameter x 200 mm length Milling spindle speed: 15-12,000 rpm Equipment/Accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Stanje: novo, Leto izdelave: 2025, Working width: 300 mm Working length: 1100 mm Brush diameter: 190 mm Godegykauopfx Anfjbl Brush speed: 1500 rpm Spindle diameter: 40 mm Number of brushes: 2 pcs. (metal + plastic) Maximum feed belt speed + stepless adjustment: 0–10 m/min Working height: 940 mm + 50 mm Maximum material height: 300 mm Suction port diameter: 2 x 120 mm Overall dimensions Length: 1240 mm Height min/max: 1350/1650 mm Width: 950 mm Weight: 435 kg Total power: 4.65 kW Voltage: 400 V Robust housing for high stability Working height of 940 mm + 50 mm and max. material height of 300 mm give you the freedom to process large workpieces Two independent brushes (steel, plastic) with powerful motors and precise manual adjustment enable high product quality Two independent extraction units ensure effective removal of sawdust and debris The machine is built from high-quality materials, guaranteeing reliability and top-quality workpieces Stepless feed belt speed adjustment allows you to achieve smooth operation and the desired productivity Many years of manufacturing experience at Optimat enable us to meet even the highest demands – a machine tool for any budget.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 5.327 h, potovalna razdalja osi X: 762 mm, največja hitrost vretena: 12.000 obr/min, število osi: 3, Ta 3-osna vertikalna obdelovalna centra HAAS VF-2SS je bila izdelana leta 2014. Opremljena je z naprednimi funkcijami, kot so merjenje orodja in merilna tipala za večjo natančnost. S 5.327 urami rezanja je to vertikalno obdelovalno središče zasnovano za učinkovite delovne procese. Če iščete visoko kakovostne obdelovalne možnosti, upoštevajte stroj HAAS VF-2SS, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Notranje hlajenje orodja (IKZ) • Merilna tipala • Merjenje orodja • Konfiguracija osi: 3 osi (X/Y/Z) • Frekvenca: 50 / 60 Hz • Izklopna zmogljivost kratkega stika: 10.000 A Gjdeyux Saspfx Anfjbl • Tok kratkega stika: 5.000 A RMS simetrično • Ocena obloka: • 208-240 VAC modeli: HRC-1 • 360-480 VAC modeli: HRC-2 • Čas rezanja: 5327 h

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg Godpfx Aoqt Dmysnfobl - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: rabljeno, Leto izdelave: 2004, 10-vretena naprava. Priključna moč: 380/400V/50Hz, 34 kW. Debelina stekla: 3-60 mm. Gbodpfswynzcsx Anfjl

Stanje: rabljeno, Leto izdelave: 2000, Premer struženja . mm Dolžina struženja . mm Krmiljenje 2x 840 D Dodatna oprema: sistem za hlajenje Transporter ostružkov: da kW Nazivni tok generatorja 95,00 A Priključna moč 65,00 kW Na voljo so 3 stroji Nakladalni sistem: ? Inventarna številka: 21214 ? Oznaka stroja: Avtomatizacija Promot za 21223 ? Leto izdelave: 1999 x2 / 2000 x1 ? Krmiljenje: Siemens Sinumerik 840D Powerline ? Podatki o električni oskrbi: ? Obratovalna napetost: 10,00 kW Gbjdpfsqn A Rnex Anfjl ? Nazivni tok: 18,00 A ? Rezerva: 25,00 A 2x 1999 / 1x 2000

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 195125, premer struženja: 545 mm, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 410 mm, pomik osi Y: 140 mm, pomik po osi Z: 570 mm, skupna masa: 5.040 kg, The MAZAK Integrex 100-IV is a compact and high-precision CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in medical technology, mechanical engineering, and precision mechanics. The machine was built in 2007 and is equipped with the powerful MAZATROL Matrix control system. This enables both conversational and ISO programming and offers modern features for efficient and productive manufacturing. Technical data at a glance: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis features a swivel range of 225°, allowing for complex 5-face machining. The main spindle's C-axis operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. The main spindle reaches speeds of up to 6,000 rpm with a power rating of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle operates at speeds of up to 12,000 rpm with an output of approx. 5.5 kW and is ideally suited for milling, drilling, and thread cutting. The machine features a tool changer (included) with a maximum tool length of 210 mm, as well as a Capto C6 tool holder, providing high rigidity and quick tool change times. Equipment: Equipment includes: Gbedpfx Anoyir I Rsfjl • Chip conveyor • "Tool Eye" tool measurement system With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. With us, you are in capable hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 5.446 h, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, moč vretenovega motorja: 22.000 W, obremenitev mize: 300 kg, število mest v zalogovniku orodij: 41, število osi: 5, This 5-axis HAAS UMC 750 was manufactured in 2013. It offers a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for a variety of machining applications. The machine provides a maximum table load of 300 kg and is equipped with advanced coolant systems for efficient operation. If you are looking for high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 Gjdpoyid Hvofx Anfjbl • Tool changer: SMTC • Rotary axes: 2 axes with support bearings • B-axis travel range: -35° to +110° • C-axis travel range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: Standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probe: WIPS system with workpiece and tool measurement • Control functions: 8M functions, rotation and scaling • Memory: 16 MB • HSM: High-speed milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40