CNC stružnica

HAAS SL20-THE

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Length: 2600 mm, Width: 1700 mm, Height: 1800 mm, Connected load: approx. 12.5 kW, an on-site inspection is possible. Dedpfx Aoq N A I Rob Hjkn

Stanje: rabljeno, Leto izdelave: 2011, Technical Data: X-travel: 410 mm Djdpfx Aewlhvwjb Hokn y-travel: 610 mm z-travel: 500 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table dimensions: 320 x 320 mm Table load capacity: 100 kg Tool changer: 48 positions Total power requirement: 35 kVA Machine weight approx.: 7.4 t Required space approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining center, NC rotary swivel table, C-axis 360°, B-axis +30-120°, Chip conveyor, Internal coolant supply 20 bar, 3D probing system, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h "machine on", approx. 3,500 spindle hours

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Maximum arm reach: 2655 mm Controller: Fanuc R-J3IC Payload capacity: 210 kg 5 robots available, each equipped with a different end-of-arm tool. Djdpjizth Hsfx Ab Hekn

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Opis: Dksdsyq Ipgjpfx Ab Hen Stroj je v dobrem tehničnem stanju, možnost preizkusa po predhodnem dogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Djdsx Hgl Hspfx Ab Hskn Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Dedpewx Rafsfx Ab Hekn Z 500 mm 10.000 vrt/min

Stanje: novo, Leto izdelave: 2024, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min • Mitre cuts left up to 60° • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device Dsdpfx Ast I R Edsb Hekn a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis Djdpfxsxf Hqqe Ab Hskn - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, stiskalna sila: 400 t, hod: 680 mm, delovna širina: 4.100 mm, Rabljena, izjemno čista visokokakovostna CNC hidravlična upogibna stiskalnica Bystronic 400 ton x 4 metre naprodaj Zelo čista 4-metrska CNC upogibna stiskalnica naprodaj – Stiskalnica za upogibanje/zgibanje s spodnjim hodom Z razširjeno odprtino in hodom Proizvajalec: Bystronic Model: PR10 400x4100 PR400 Dolžina mize: 4100 mm / 4,1 metra 8 osi – 6-osni povratni prislon: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Dkjdpfxov Dw Syj Ab Hsn Dva sprednja motorizirana podajalca pločevine / pomočnika pri dvigu Hidravlično vpenjanje orodij CNC hidravlična stiskalnica Kapaciteta 400 ton Švicarski Cybelec krmilnik – MoEva12 Več orodij za oblikovanje Vključen sistem za zlaganje orodij V popolni delovni pripravljenosti in v celoti servisirana pri Bystronic UK Maksimalna hitrost zapiranja: 200 mm/s Komplet s širokim naborom orodij

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 356 mm Turning length: 705 mm Control: MSX 850 MAPPS II Swing diameter: 755 mm Standard turning diameter: 275 mm Travel path – X axis: 260 mm Dkjdpfx Abey H R D Ts Hjn Travel path – Y axis: 100 (+/-50) mm Travel path – Z axis: 795 mm Rapid traverse – longitudinal/plan: 30 / 30 m/min Rapid traverse Y axis: 10 m/min Rapid traverse B axis (sub-spindle part transfer): 30 m/min Spindle 1 speed: 4000 rpm Spindle 1 power: 18.5/18.5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 speed: 6000 rpm Spindle 2 power: 11 / 7.5 kW Turret stations / live: 16 / 16 VDI 30 Driven tool power: 5.5/5.5/3.7 kW Driven tool speed: 6000 rpm Total power requirement: 39.2 kVA Machine weight approx.: 6.2 t Space requirement approx.: 3.1 x 2.0 x 2.2 m Equipment: Chip conveyor Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) High-performance precision turning centre with Y-axis and sub-spindle. Ideally suited for machining complex turned parts with off-centre milling operations. Simple machine programming thanks to MAPPS II conversational control. Machine can be demonstrated under power in stock.