Odstranjevalec prahuHöcker Polytechnik
VT 200-L #95203
Odstranjevalec prahu
Höcker Polytechnik
VT 200-L #95203
Stalna cena brez DDV
8.300 €
Leto izdelave
2022
Stanje
Rabljeno
Lokacija
Rodgau - Jügesheim 

Prikaži slike
Prikaži karto
Podatki o stroju
- Opis stroja:
- Odstranjevalec prahu
- Proizvajalec:
- Höcker Polytechnik
- Model:
- VT 200-L #95203
- Serijska številka:
- 515
- Leto izdelave:
- 2022
- Stanje:
- rabljeno
Cena in lokacija
Stalna cena brez DDV
8.300 €
- Lokacija prodajalca:
- Hans-Böckler-Straße 3, 63110 Rodgau - Jügesheim, Nemčija
Klic
Prodaja strojev

Ste že objavili oglas za svojo rabljeno napravo?
Prodajte prek Machineseeker brez provizije.
Več o prodaji strojev
Več o prodaji strojev
Podrobnosti ponudbe
- ID ponudbe:
- A19391491
- Št. reference:
- AE-M-23003
- Nazadnje posodobljeno:
- dne 24.06.2025
Opis
New exhibition machine!! List price €9,854 net
Designed for extracting individual dust sources; suitable for installation in the workspace, but only outside of potentially explosive areas.
Key design features:
- Galvanized sheet steel construction
- Space-saving compact design
- Delivered ready for operation
- ATEX—pressure surge resistance, FSA tested
- Low energy consumption with high performance, thanks to clean-air side high-performance fan with special impeller
- Energy-saving motor, efficiency class IE2/Eff1
- Two large-capacity collection bins, with insert bags
- Collection volume: 400 l
- High operational safety and long filter life with BGIA-tested filter bags
- Motorized filter cleaning device with automatic control and run-time addition
- Alpha control unit with automatic start (sliding gate control available at extra cost)
- Connection cable, 5 m long, with plug
- Manufactured in accordance with DIN 8416
- Residual dust content in exhaust air less than 0.1 mg/m3
- GS-HO-14 GS – H3 certification passed
Scope of delivery:
- Filter bags, externally loaded, permeability < 0.5% (BGIA)
- Energy-saving motor, efficiency class IE3
- Two large, mobile collection bins
- Mitsubishi Alpha control unit with automatic start (connect up to six I-coils) and run-time addition
- Input for external shut-off signal (limit switch, etc.)
- Automatic vibration cleaning
- GS wood dust tested – H 3
Vacumobil VT 200 – ø 200 mm, 4.0 kW, 400 V, 50 Hz
-----
Technical data:
Intake nozzle arrangement: left
Nominal air flow: 2260 m3/h
Max. air flow: 3400 m3/h
Pressure difference at:
- Nominal air flow: 2900 Pa *)
- Max. air flow: 2100 Pa *)
Filter area: 12.05 m2
Intake diameter: 200 mm
Intake height (approx.): 1500 mm (centered)
Fan motor: 4.00 kW, 3x400 V, 50 Hz, IE 3
Shaker motor: 0.12 kW, 3x400 V, 50 Hz, II 3D
Upstream fuse: 20 A (by customer)
Sound pressure level: 71.0 dB(A)
Weight (approx.): 425 kg
Dimensions (L x W x H): 2012 x 1012 x 1990 mm
*) Average values
The negative pressure achieved at the connection point with filtered air depends on the extracted material and fine dust content.
ATTENTION:
Dodpfewt Hadox Ag Nowc
1. Automatic slide gates are mandatory when purchasing a new extraction system!
2. An air measurement is required after installation of the extraction system!
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Designed for extracting individual dust sources; suitable for installation in the workspace, but only outside of potentially explosive areas.
Key design features:
- Galvanized sheet steel construction
- Space-saving compact design
- Delivered ready for operation
- ATEX—pressure surge resistance, FSA tested
- Low energy consumption with high performance, thanks to clean-air side high-performance fan with special impeller
- Energy-saving motor, efficiency class IE2/Eff1
- Two large-capacity collection bins, with insert bags
- Collection volume: 400 l
- High operational safety and long filter life with BGIA-tested filter bags
- Motorized filter cleaning device with automatic control and run-time addition
- Alpha control unit with automatic start (sliding gate control available at extra cost)
- Connection cable, 5 m long, with plug
- Manufactured in accordance with DIN 8416
- Residual dust content in exhaust air less than 0.1 mg/m3
- GS-HO-14 GS – H3 certification passed
Scope of delivery:
- Filter bags, externally loaded, permeability < 0.5% (BGIA)
- Energy-saving motor, efficiency class IE3
- Two large, mobile collection bins
- Mitsubishi Alpha control unit with automatic start (connect up to six I-coils) and run-time addition
- Input for external shut-off signal (limit switch, etc.)
- Automatic vibration cleaning
- GS wood dust tested – H 3
Vacumobil VT 200 – ø 200 mm, 4.0 kW, 400 V, 50 Hz
-----
Technical data:
Intake nozzle arrangement: left
Nominal air flow: 2260 m3/h
Max. air flow: 3400 m3/h
Pressure difference at:
- Nominal air flow: 2900 Pa *)
- Max. air flow: 2100 Pa *)
Filter area: 12.05 m2
Intake diameter: 200 mm
Intake height (approx.): 1500 mm (centered)
Fan motor: 4.00 kW, 3x400 V, 50 Hz, IE 3
Shaker motor: 0.12 kW, 3x400 V, 50 Hz, II 3D
Upstream fuse: 20 A (by customer)
Sound pressure level: 71.0 dB(A)
Weight (approx.): 425 kg
Dimensions (L x W x H): 2012 x 1012 x 1990 mm
*) Average values
The negative pressure achieved at the connection point with filtered air depends on the extracted material and fine dust content.
ATTENTION:
Dodpfewt Hadox Ag Nowc
1. Automatic slide gates are mandatory when purchasing a new extraction system!
2. An air measurement is required after installation of the extraction system!
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2010
Pošlji zahtevo
Telefon & Faks
+49 6106 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake