Skladiščno dvigalo

Hänel Lean-Lift 3060-825

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/10-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Psdpfx Afjxr Ng Usajpu Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances: X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle: Taper: SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions: Length: 1626 mm Width: 914 mm T-slot width: 16.00 mm T-slot spacing (center-to-center): 125 mm Number of T-slots (standard): 7 Max. table load (evenly distributed): 4,536 kg Integrated 4th axis (B-axis): Table: 1,626 mm x 813 mm Clamping surface diameter: 762 mm Rotation range: 360° Max. workpiece swing diameter: 1,270 mm Table load: 4,536 kg Max. rated power: 3.7 kW Continuous rotation torque: 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for cutting (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for cutting in X, Y, Z axes: 12.7 m/min Rapid traverse (X): 15.2 m/min Rapid traverse (Y): 15.2 m/min Rapid traverse (Z): 15.2 m/min Axis motors Ppedpsv N Di Aefx Afaju Tool changer: 30 stations Max. tool diameter (all positions filled): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General specifications: Coolant tank capacity: 360 L Dimensions: Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 532.323/20-0, skupna višina: 6.454 mm, skupna širina: 6.810 mm, skupna dolžina: 2.810 mm, nosilnost na odsek shranjevanja: 180 kg, nosilnost: 40.000 kg, Here, a set of two Hänel Lean Lifts in a connected lift system is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model Designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total loading capacity: 40,000 kg per Lean Lift (container weight must be deducted) Access Point 1 (Front) Clear opening height: 880 mm Access point height: 890 mm (standard height) Access point floor clearance: 890 mm LED lighting: present Manual sliding door: present Light curtain: present Access Point: Optoelectronic identification system (28-fold) for precise height measurement of stored goods Drive and Travel Speeds Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Podpfx Afjxyygujaspu Horizontal motor power: 0.37 kW Lift Control Control type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in the WMS Display language: German (DE) Additional memory card: available for S-version (standalone) Module 00 - remote operation lift mode Safety equipment: special safety equipment required when remotely operated outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Unladen weight without containers per system: 4,371 kg Container unladen weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section for mains connection: 2.5 mm² at 9.6 A Maximum fuse rating for mains connection: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED field for colour marking of the requested item) - Height sensor technology for automatic detection of fill height and height-optimized storage - Hänel slotted wall: 131 usable storage profiles, slotted profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for high vertical and horizontal travel speeds - ESB package: redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER Manufacturer: Rösler Model: RDGE 800-4 Year of Manufacture: 2004 Belt Width: 800 mm Pass-Through Height: 550 mm Turbine Wheels: 4 units with frequency inverter Filter System: Wet filter system Including several infeed and outfeed conveyor belts. Ppsdpfxjv Idf Ie Afasu Including control cabinet, complete documentation, etc. Excellent condition! The machine is currently dismantled! WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width: 800 mm Inlet Height: 550 mm Turbine Wheels: 4 units with frequency inverter Filter: Wet filter system Supplied with multiple infeed and outfeed conveying belts Includes main electrical panel, complete documentation Very good condition! Machine is currently dismantled Price: Loaded on truck Warranty: 6-month functional and operational warranty if commissioned by DECK Sarl. Spare parts availability guaranteed for the next 10 years OPTIONAL: Delivery to your facility Assembly / Commissioning / Training Supervision by certified erection engineer We also supply spare parts for Rösler, Schlick, Wheelabrator, Gietart and other shot blasting machines! We can offer spare parts for Rösler, shot blasting machines!

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (upward closing movement) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Pjdpfx Ajtwba Sefaopu Double loading table

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 356801, doseg roke: 706 mm, Robotski TIG varilni stroj smo uporabljali le 2 meseca. Stroj je v brezhibnem stanju. Odsesavanje ni bilo nikoli v uporabi. Priložena sta ohišje stroja in varilna miza. Programiranje 'Ready2_pilot' in dovod materiala za varjenje je mogoče kadarkoli naknadno namestiti. Ppjdpfx Ajxw R Nnefaeu

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 813 mm, skupna masa: 13.611 kg, dolžina mize: 1.626 mm, širina mize: 914 mm, model krmilnika: HAAS, nazivna (navidezna) moč: 22 kVA, premer vrtljive mize: 760 mm, največja hitrost vretena: 6.000 obr/min, obremenitev mize: 4.536 kg, Oprema: transportni trak za ostružke, Commissioned 03/2006 IKZ 70 bar (TSC 1000) Pjdevgmr Ispfx Afaepu 30-pocket tool magazine (BT50) Full 4th axis Spindle & gearbox replaced new in 2017 Operated in single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! (if our new machine is delivered on the same day)

Stanje: novo, Leto izdelave: 2025, nosilnost: 5.000 kg, Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilted height min: 800 mm Tilted height max: 1900 mm Horizontal height min: 1050 mm Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Ppedpfx Afjl Dq U Uoaeu Weight: 3200 kg Rotational speed from 0.01 to approx. 0.9 rpm CE certification

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system. Pedpfx Aexak Hxsfaspu

Stanje: generalkompletno obnovljen (rabljeno), Herma polavtomatski etiketirni stroj za ovijanje, Allen vroči žig kodirnik, s priloženimi rezervnimi deli in navodili za uporabo, vse nameščeno na nerjavni mizi, 1-fazni priklop. Ppodoib Dcropfx Afaju