Stiskalnica - hidravlična

HÄMMERLE AP 100x2600

Stanje: dober (rabljeno), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roll diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin wall): Ø 70 x 1.5 mm, min. Ø 700 mm Tube capacity (thick wall): Ø 2" x 3.2 mm, min. Ø 450 mm Angle profile capacity: 50 x 50 x 6 mm, min. Ø 400 mm Flat bar capacity: 50 x 10 mm, min. Ø 250 mm Flat bar capacity (hard edge): 100 x 15 mm, min. Ø 250 mm Box section capacity: 50 x 50 x 3 mm, min. Ø 500 mm Shaft capacity: Ø 35 mm, min. Ø 250 mm Motor power: 1.85 kW Rsdpfxjw Hx Tvs Agtst Bending speed: 10 rpm

Stanje: novo, Grinding range: 2 - 20 mm Point angle min./max.: 90 - 135 degrees Connected load: 230 V Machine weight: approx. 8.6 kg Space requirement: approx. 0.35 x 0.2 x 0.2 m Packaging dimensions: 340 x 270 x 410 mm Weight: 8.6 kg Rjdpfx Aoupxkwegtet

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Amada HFE 220-L Year of manufacture: 2004 Laser height adjustment Working width: 3100 mm Pressing force: 220 tonnes Equipped with numerous tools Rjdpfx Ajuiwypjgtet

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm Rodpfotzf N Rjx Agtet - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Leto izdelave: 1983, stanje: dober (rabljeno), 1 Console Milling Machine Make: RECKERMANN, Model: KOMBI 900, Year: 1983, Serial No.: 6367P, Table size: 1,000 x 310 mm, Travel X/Y/Z: 720 x 220 x 450 mm, Redpfx Agoh E Du Dotst Tool holders: SK 50, Heavy-duty machine vice, Spindle speeds: 3...2800 rpm

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 35 t, delovna širina: 2.000 mm, Pressure: 35 tons Max. bending length: 2000 mm Backgauge Drive power: 4.5 kW Weight: 3000 kg Redpfx Aswagykjgtjt

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min Rsdofu Ivzjpfx Agtst • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Machining center Manufacturer: KNUTH Redpfxetiauhs Agtjt Model: EcoMill 350 CNC

Stanje: rabljeno, skupna dolžina: 1.330 mm, skupna širina: 1.040 mm, skupna višina: 1.150 mm, Lastna teža: 1.800 kg Cena: Po dogovoru - Dokumentacija na voljo: Ne - CE certifikat priložen: Ne - Upravljanje: Konvencionalno - Premer gredi [mm]: 85 - Kapaciteta premera okroglega materiala [mm]: 60 Rsdpfxsxuf Sle Agtst - Transportne mere: 1330mm x 1040mm x 1150mm (d x š x v) - Transportna teža [kg]: 1.800 kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračun razlike: DDV je odbiten za podjetnike Dostava in odkup strojev iz industrijskega področja sta možna kadarkoli Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Rsdpfx Agerfx Utstot Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.