Kombinirani lesa okvir skupščine postaja

H&M X-Combi

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Kedjihpn Nepfx Abbowt Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Kwodpfxeh Ayyqo Abbst Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Kedpfehw Ng Isx Abbjwt Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Kwsdpjfg E Hlsfx Abbst Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Leto izdelave: 1977, Stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Kwsdpfed N Rb Dsx Abbst Swivelling heads. Drilling heads included on both sides at the front. Very good condition. Available immediately.

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Kwsdju D Amgepfx Abbot Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 9.100 mm, skupna širina: 3.600 mm, Naše podjetje je proizvajalec strojev in naprav za obrate za montažne hiše. Proizvajamo fiksne montažne mize, rotacijske mize, metuljaste mize in celotne proizvodne linije. V ponudbi nov montažni stroj z merami 3,6 m x 9,0 m. - Konstrukcija prašno barvana Kedpfxovv Rv Ae Abbjwt - Površina mize prekrita s vezano ploščo z udarno odporno prevleko - Luknje za namestitev pritrdilnih cilindrov SD-01 - Odstranljivi in nastavljivi omejevalni zatiči - Modularna konstrukcija za samostojno montažo (ena paleta) - Nizki stroški transporta po vsej Evropi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Üstünkarli UDKP 160 Cutting height: 160 mm Chain bed approx. 420 mm With spikes in the chain bed Kjdpfsucnudox Abbowt Including slat bushing and intermediate rings Main motor: 75 kW

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.900 mm, skupna višina: 3.000 mm, skupna dolžina: 19.500 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, skupna masa: 13.000 kg, širina mize: 800 mm, Linija je namenjena proizvodnji EURO palet 1200/800. Za učinkovito zbíjanje palet so potrebne tri osebe: ena za polaganje spodnjih delov in dve za polaganje zgornjih delov palete. Zmogljivost stroja je 2500 kosov v 8 urah, odvisna pa je tudi od hitrosti delavcev pri polaganju elementov. Po zbíjanju se paleta prenese do rezkalnika, ki obdela paleto, odreže vogale in izžge oznake. Nato paleta vstopi v stapler, ki paleto odreže na dolžino 1200 mm, obrne in s pomočjo dvigala zloži v sklad. Možno je zlaganje v t.i. sendvič (29 kosov) ali posamično do 20 kosov. Za staplerjem je zaloga za tri stebre palet. Linija je prilagojena za odsesavanje žagovine. Kedpfx Aet Tbuyebbewt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, moč: 160 kW (217,54 KM), vhodna napetost: 380 V, trajanje garancije: 12 meseci, leto zadnje generalne obnove: 2023, Oprema: dokumentacija / priročnik, 1 Pellet press, brand: Buhler DPAB Inner die diameter: 660 mm Die running surface: 138 mm The press is equipped with a 160 kW motor. Press door is made of stainless steel and fitted with an overload relief valve. 2-roller press with 2 rollers, refurbished in a dimpled or corrugated version. Press is complete with die lifting device and tools. The press has been fully overhauled and fitted with new bearings and wear parts, such as front and rear scrapers, die clamp ring, etc. Also includes new V-belts. Kjdjrah Evepfx Abbjwt All safety measures will be observed and appropriate switches will be fitted: Friction protection, door switch, and inspection hatch switches will be installed.