Univerzalni obdelovalni center

GROB G 550

Stanje: rabljeno, Leto izdelave: 2019, x-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: TNC640 B axis: 360 x 0.001° A axis: -185 / +45 x 0.001° Feed rate X axis: 1 – 65,000 mm/min Feed rate Y axis: 1 – 50,000 mm/min Feed rate Z axis: 1 – 80,000 mm/min Rapid traverse X/Y/Z: 60 / 50 / 80 m/min Spindle speeds – infinitely variable: 1 – 16,000 rpm Drive power 100% duty cycle: 25.00 kW Drive power 40% duty cycle: 32.00 kW Torque at 40% / 100% duty cycle: 206.00 / 159.00 Nm Tool holder: HSK-A63 Tool magazine: 70 positions Maximum tool length: 500 mm Tool diameter: 118 mm Tool diameter with free adjacent slots: 260 mm Maximum total tool weight: 22.00 kg Chip-to-chip time: 4.2 sec Pallet size: 630 x 630 mm Swing circle diameter: 900 mm Hnjdpfx Aoxn Amajh Deu Total connected load: 35.00 kW Machine weight approx.: 25.00 t Space requirements approx.: 7.00 x 3.50 x H3.50 m 5-axis machining center with Heidenhain TNC640 control, integrated coolant system KNOLL KF220, high-pressure coolant supply 23 bar, through-spindle coolant (IKZ), chip conveyor, Heidenhain TS640 probe, GROB spindle diagnostics, electromechanical tool length measuring, BLUM laser tool monitoring, tool cleaning system, kinematics set.

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: X-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) 2x pallet changers: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Required space approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with programmable rotary-tilting table (A/B-axis) The B-axis provides a swivel range of 180°, allowing the part to be machined overhead and chips to fall freely downwards. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Dual pallet changer, pallets 630 x 630 mm 6-way hydraulic supply to pallets with coupling mechanisms, rotary union in A- and B-axis Special hydraulic pump system ICS (internal cooling, 10–80 bar), 1 clamping channel in the working area with proportional valve 10–200 bar Electromechanical tool length measuring device GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Hnedpfexix Atsx Ah Dsu Rinse gun Coolant rinsing in the work area Air gun Oil skimmer Automatic door Remote diagnostics Price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.700 h, Krmilna enota Znamka: HEIDENHAIN Model: TNC 640 Pomik osi Pomik X-osi: 800 mm Pomik Y-osi: 950 mm Pomik Z-osi: 1020 mm Hnodpfx Asxfw A Deh Deu Dodatna oprema Dodatki: dodatna paleta + enota za hlajenje hladilne tekočine Ta 5-osni univerzalni obdelovalni center GROB G550a je bil proizveden leta 2020. Omogoča napredne zmogljivosti za zahtevna rezkalna dela. Izkoristite priložnost za nakup tega univerzalnega obdelovalnega centra GROB G550a. Za več informacij nas kontaktirajte. Vrsta uporabe Rezkanje

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, številka stroja/vozila: S216405501002, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva,

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 1.020 mm, pomik po osi Z: 1.020 mm, skupna masa: 20.000 kg, GROB G550 with Heidenhain iTNC 530 control, used machine, year of manufacture 2011. Rotary swivel table, 4th/5th axis with T-slots, 52 kW, 12,000 rpm, 83 Nm, HSK 63 tool holder, 60-position tool changer. Features: Protective enclosure/scratch-resistant glass – Through-spindle air supply – Grey/blue paint finish – Spindle cooler – Machine light – Chip conveyor – Coolant system – High-pressure internal coolant supply (IKZ) 80 bar – 3D touch probe – Rinsing gun / blow-out gun – Tool cleaning unit – Work area extraction – Electronic handwheel – Remote machine diagnostics preparation – 3D model – Kinematic Opt – DCM collision monitoring – Balluff BIS C – GROB spindle diagnostics (GSD). Hjdpfxow Hx Exj Ah Donu The machine can be inspected under power!

Stanje: rabljeno, Leto izdelave: 2014, Technical details: Hsdswr Du Nopfx Ah Donu X-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 (2x60) positions Pallet changer 2x: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Floor space required approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with controlled rotary/swivel table (A/B axis). The B-axis offers a swivel range of 180°, meaning workpieces can be machined upside down, allowing chips to fall freely downward. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with only one tool in a single operation. Dual pallet changer, pallets 630 x 630 mm 6-fold hydraulic supply to the pallets with coupling mechanisms, rotary unions in A and B axes, Special hydraulic pump system. ICS (internal coolant system) (10–80 bar), single clamping channel in the machining area with proportional valve 10–200 bar Electromechanical tool length measuring device by GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D probe (M&H) Oil mist extraction system Siemens HT8 electronic handwheel Rinse gun Coolant wash-down in the machining area Air blow gun Oil skimmer Automatic door Remote diagnostics KOMET Komtronic U axis with 2 units: 1. UAS 160-HSK100-E-Z50-1 with 50 mm stroke 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm stroke *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: U255805501002, potovalna razdalja osi X: 800 mm, pomik osi Y: 950 mm, pomik po osi Z: 1.020 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 23 letvica, število mest v zalogovniku orodij: 60, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Highlights: - Geometry refurbished - A/B axis renewed - Ready 2 Go ___ Base machine G550 AB Generation 0 Travel X-axis: 800 mm Travel Y-axis: 950 mm Travel Z-axis: 1020 mm Power supply: 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum inlet pressure 5 bar Decentralized work area extraction Manual work area door for manual loading/unloading Machine control HEIDENHAIN iTNC 530 Swivel table (A' axis) Rotary table with T-slots (B' axis) Motor spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW Single-disc magazine HSK-A 63 with 60 tool pockets Tool cleaning device Electromechanical tool length measuring device High-pressure coolant system (23 bar, ICS) Low-pressure coolant system Hnedpsw El N Iofx Ah Deu Weekend coolant circulation Oil skimmer for coolant maintenance Blow-out gun at work area Rinsing gun at work area Work area lighting Machine painting as per GROB standard Machine cooling system with air-cooled chiller Operating/environmental conditions as per GROB standard Electrical equipment as per GROB EU standard Kinematic optimization with KinematicOpt Infrared probe OMP60 (RENISHAW) Remote machine diagnostics Warranty for 3 months

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: X-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) 2x pallet changers: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Required space approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with programmable rotary-tilting table (A/B-axis) The B-axis provides a swivel range of 180°, allowing the part to be machined overhead and chips to fall freely downwards. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Dual pallet changer, pallets 630 x 630 mm 6-way hydraulic supply to pallets with coupling mechanisms, rotary union in A- and B-axis Special hydraulic pump system ICS (internal cooling, 10–80 bar), 1 clamping channel in the working area with proportional valve 10–200 bar Hnedpfxswr Drno Ah Dou Electromechanical tool length measuring device GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Rinse gun Coolant rinsing in the work area Air gun Oil skimmer Automatic door Remote diagnostics Price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N2495255010011, potovalna razdalja osi X: 800 mm, pomik osi Y: 950 mm, pomik po osi Z: 1.020 mm, Highlights: - Powerful motor spindle with 16,000 rpm - Pallet clamping system - 90-tool capacity in the system Basic Machine: G550 access SERIES X-axis travel: 800 mm Y'-axis travel: 950 mm Z-axis travel: 1020 mm Power supply: 400 V, 50 Hz, TN-S Decentralized work area extraction system: 800 m³ Internal stainless steel work area lining Doors for the fluid cabinet SIEMENS SINUMERIK 840D sl with GROB⁴Pilot Generation 2 machine control panel Swivel table (A'-axis) Rotary table with pallet clamping system (B'-axis) Motor spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil/air lubrication Compact double disk magazine HSK-A 63 with 90 tool stations Tool cleaning system Electromechanical tool length measuring system Hsdpfxovgalze Ah Denu Pallet 630 x 630 mm, grid hole pattern, without locating claws Scraper belt chip conveyor, discharge height 1,100 mm High-pressure coolant system (5-40 bar, ICS) Compressed air supply through spindle center Air blow gun in the work area Rinsing gun in the work area Rinsing device (Z-axis) Compressed air cleaning bar for the safety glass in the work area door Remote machine diagnostics with access control switch 12-month warranty

Stanje: rabljeno, Leto izdelave: 2013, Technical details: X-axis travel: 800 mm Y-axis travel: 950 mm Z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) Pallet changer (dual): 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Space required approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with controlled rotary-swivel table (A/B axis). Hsdpswr Dt Sofx Ah Denu The B-axis has a swivel range of 180°, meaning the part can be machined upside down, allowing chips to fall freely downward. U-axis = CNC-controlled radial tool movement, enabling different diameters of a bore to be machined with one tool in a single operation. Dual pallet changer, pallets 630 x 630 mm 6-fold hydraulic supply to pallets with coupling mechanism, rotary unions in A and B axes, special hydraulic pump system. IKZ (internal coolant supply): 10-80 bar, one clamping channel in the work area with proportional valve 10-200 bar electromechanical tool length measuring device from GROB, BLUM laser for tool monitoring tool coding chip conveyor, 3D probe M&H measuring probe, oil mist extraction, electric handwheel Siemens HT8 rinse gun, coolant flushing in the work area air gun oil skimmer, automatic door remote diagnostics KOMET Komtronic U-axis with 2 units: 1. UAS 160-HSK100-E-Z50-1 with 50 mm stroke 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm stroke