Linija z lepljenjem s prstnim spojem

GOMA FC10 PK3

Stanje: rabljeno, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm, Width: approx. 80 – 240 mm, Finger joint length: 400 – 1,500 mm, Finished length: 2.50 m – 13.50 m stepless. Consisting of the following components: - SMB vacuum destacking unit (longitudinal) with 2 lift tables and 2 package roller conveyors, year 2013, max. package dimensions 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system; singling and feeding onto roller conveyor for scanner, board turner, diverter for too wet/too dry, diverter for B-quality, marking station or automatic mode - Bidac end-grain scanner for detecting cupping, year 2013 - Brookhuis moisture measurement FMI 5, year 2019 - Microtec scanner Goldeneye 502, year 2012, with X-ray, 4 colour cameras, and new optimization software Ksdpfevvi Tyox Al Nslr - Dimter Opticut 350-2, year 2003 with paddle ejector (retrofit 2009) and associated sorting belts, pneumatic ejector for 2 additional qualities - NKT packaging unit - NKT finger jointing system with rotary table Special Pack AH 1050, year 2005, consisting of: milling machine, tilt station, feed track length 5.0 m, cycle press length 6.00 m, cross-cut saw - SMB stacking machine, year 1998, 2.50 – 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 manual stacking blades, infinitely adjustable stop electro/hydraulic, package width max. 1200 mm, package height max. 600 mm, hydraulic package pusher Location: at customer site

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Kjdpfxjt Tqy Ej Al Nolr Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 0,004 kW (0,01 KM), največja višina reza: 250 mm, največja širina rezanja: 450 mm, premer žaginega lista: 400 mm, skupna masa: 7.500 kg, Double Arbor Multi-Blade Saw 2x110 kW TOS SVITAVY PWR 422 – Czech production – double arbor – full technical documentation (DTR) TECHNICAL DATA: – Maximum cutting height: 250 mm – Track width: 450 mm – Arbor width: 450 mm – Blade bore diameter: 80 mm – Arbor diameter: 60 mm – Minimum blade diameter: 300 mm – Maximum blade diameter: 400 mm – Maximum input material width: 860 mm – Minimum processed material length: 1500 mm * From above: – Kickback devices: yes – Pneumatically pressed metal feed roller: yes – Kickback devices: yes – Pneumatically pressed metal feed roller: yes – Pressure unit: yes – Saw arbor: yes – Pressure unit: yes – Two pneumatically pressed metal feed rollers: yes * From below: – Metal idle roller: yes – Guide: yes – Kickback devices: yes – Track: yes – Saw arbor: yes – Track: yes Kledpfx Aeri Nvvjl Nor – Infinitely variable feed speed with inverter: 4–40 m/min – Main motors: 2x110 kW – Feed motor: approx. 3 kW – Electric elevation of the frame (up/down): 0.55 kW – Electric adjustment of saw arbors: 2x0.18 kW – Central lubrication system – Extraction port diameter: 2x300 mm – Dimensions (LxWxH): 3400x2650x2200 mm – Approximate weight: 7500 kg

Leto izdelave: 2008, stanje: delavnici obnovljeno (rabljeno), Maximum gluing length: 3 m Kedpjk Uw Uksfx Al Njlr Minimum gluing length: 1.5 m The press is in excellent technical condition The machine was operated together with a Spanevello ARROW.

Stanje: novo, Leto izdelave: 2024, Effective delivery volume approx. 1050 l/min Maximum pressure: 10 bar Tank capacity: 270 l Air outlet: ½" Packaging unit: 1 Dimensions and weights Length approx.: 1200 mm Width/Depth approx.: 650 mm Height approx.: 1540 mm Weight approx.: 295 kg Electrical data Motor power input: 7.5 kW Connection voltage: 400 V Number of phases: 3 Ph Kedpfx Aefh Hahjl Nslr Current type: AC Mains frequency: 50 Hz Noise emission Sound pressure level Lp: 62 dB(A) Sound pressure details: Measured at 1 m distance according to DIN 45635 T 13 Motor Type of motor: Electric Location: Ex stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Leto izdelave: 1991, Kaeser CS120 Vijačni kompresor Kedpfxewnn Tue Al Nolr Popolnoma avtomatska, interno povsem cevno in električno povezana kompaktna naprava, enostopenjsko komprimirana z vbrizgavanjem olja, zračno hlajena, zvočno izolirana. Končni tlak: 8,50 bar Moč motorja: 75,00 kW Dobava: 11,34 m³/min

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 2200x1650x1600 mm Teža 1300 kg Ksdsvz Hybjpfx Al Nelr Skupna potrebna moč 17,5 kW Klinasto-cinkarski rezkar MXB-3515AL - Debelina lesa min./maks. 20 - 150 mm - min. dolžina obdelovanca 100 mm - maks. delovna širina 450 mm - delovna miza 500 x 650 mm - premer vretena rezkarja 50 mm - premer vretena rezkalnika 30 mm - hitrost vretena rezkarja 6750 min⁻¹ - hitrost rezkalnika 6750 min⁻¹ - moč motorja rezkarja 11,0 kW - moč motorja rezkalnika 4,0 kW - moč motorja hidravlične enote 2,2 kW - skupna moč 17,2 kW - napetost 400 V, 50 Hz - upravljanje hidravlično - rezkalna miza vodena po preciznih THK linearnih vodilih - upravljanje s stopalko – mesto za nanos lepila - priključek stisnjenega zraka 6 bar - dimenzije D=2200, Š=1650, V=1600 mm - teža 1300 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4300 x 1650 x 2520 mm Weight: 7900 kg Klsdev A Hlyjpfx Al Njr Total power requirement: 108 kW Veneer press SOLID 3113-200-6 - 6 daylight levels - Pressing surface: 3000 x 1300 mm - Heavy-duty steel heating plates, 42 mm, with thermal oil heating - Total pressing force: 120 t (3.1 kg/cm²) - Opening height: 80 mm - 8 hydraulic cylinders, diameter 100 mm - Hydraulic pump: 7.5 kW - Heating plate power: 108 kW - Safety pull cord - Dimensions: 4300 x 1650 x 2520 mm - Weight: 7900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: FSL-62H-FJ-420A, Furnimate polavtomatska linija za rogljičenje (finger joint), letnik 2019, v zelo dobrem delovnem stanju. Model: FSL-62H-FJ-420A Sprejema dolžine od 300 do 1400 mm, višina do 180 mm. Maksimalna stiskalna dolžina do 4.500 mm. Polavtomatska enostranska rezkalna enota za rogljičenje s krožno žago za odrez, utorno žago in rezkalno enoto za izvedbo rogljičnega spoja. Avtomatsko podajanje z transporterjem do enote za lepljenje in stiskanje, omogoča spajanje lesa do 4.500 mm dolžine in 1.400 mm širine. Lepilna stiskalnica z avtomatskim izmetom zlepljenega kosa. Za slike pošljite svojo mobilno številko na WhatsApp. Možnost demonstracije v obratovanju v Sheffieldu, Yorkshire, Velika Britanija. Na voljo popolna dokumentacija. Fotografije in videoposnetki na voljo preko WhatsAppa. Cena ex-works, razstavljeno in naloženo na prevoz kupca: £28.500,00 + DDV, če je ustrezen, ali 32.000,00 EUR. Kjdpfxouaf Rdj Al Nelr

Stanje: novo, Table size 1,200 x 780 mm Motor power 7.5 kW Spindle diameter 30 mm Fimal TX 160 tilting spindle moulder ----- Partnership Edition Offer: - Fimal TX 160 (7.5 kW) - 10 HP motor - Forward and reverse run - Upper control panel with electronic digital display for spindle height and tilt ----- General Technical Manufacturer Description: The FIMAL TX160 sets new standards in modern woodworking. With a precise tilting spindle, innovative control technologies, and a robust construction, it offers maximum stability and flexibility for demanding milling operations. Thanks to the stepless tilting adjustment, precise digital control, and powerful motorization, the TX160 is ideal for joineries, furniture makers, and industrial manufacturing. - Milling fence incl. parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front fence jaw, electric travel tilting device for the entire fence, quick-release lever for fixing aluminum fence jaws and pressure device - Curved milling fence - Electromotive spindle height adjustment incl. digital display and decimal increment setting - Table insert adjustable to the diameter of the milling tool (instead of table insert rings) - Indicator lights for set milling speed - Electrical system and safety equipment according to CE standards - Table dimensions: 1,200 x 780 mm - Milling spindle d= 30 mm, H= 140 mm - Milling speeds: 1500/3000/4500/6000/8000/10000 rpm - Max. tool size under table: d= 320 mm, H= 50 mm - Motor: 5.5 kW / 7.5 HP / 50 Hz - Noise level according to EN 27960: 83.9 – 87.3 dB(A) - Spindle tilt: -45° to +45° - Electromotive spindle tilt adjustment incl. electronic display and decimal increment setting - Max. spindle height at 30 or 35 mm diameter: 140 mm Kljdpfoxyafqox Al Nsr - Max. spindle height at 40 or 50 mm diameter: 180 mm - Total spindle stroke: 220 mm - Table opening: 340 mm ----- Price for the above-mentioned machine on request! ----- (Technical specifications according to manufacturer – subject to change!) All prices net. Plus statutory VAT. Photos show the same model. Original images not yet available.