Visokotlačni umivalnik HP 30

Glogar HP30

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, HD Washing Table – HD Brush Washing Table The washing table features an adjustable 60 bar high-pressure pump, allowing for cleaning operations within an enclosed workspace. Cleaning is achieved using an aqueous degreaser (10 kg included in delivery) at approximately 45°C. - Viewing window with integrated lighting - Media filtration via cartridge filter - Convenient operation with foot switch - Includes rotary table Technical Data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm - Load capacity: 50 kg - Operating pressure: adjustable up to max. 60 bar - Pump capacity: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank volume: 170 l - Heating power: 4,000 W - Total power consumption: 8.0 kW - Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg Iasdpshl If Nofx Af Tol - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Cleaning System Type W 60 C Machine body, internal piping system, control cabinet, and washing basket made of stainless steel Combination machine – rotating table system with removable tilting device and small parts basket - Basket diameter (rotating table washing basket): 600 mm - Usable internal height: 370 mm - Basket load capacity (rotating table washing basket): 100 kg - Usable internal height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm - Mesh size: 12 mm - Basket load capacity (small parts basket): 20 kg Full stainless steel construction Pump(s) and external piping/fittings version Suitable for operation with liquids with a density of 1.3, featuring a reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO rinse (minimized rinse loss) for minimal water consumption Water supply from operator's mains with machine-side hot water supply Iodpfsq Ewgkox Af Tjal Hot air drying 1 x 4 kW Oil skimmer Discharge device/floor flushing with pump and piping system in stainless steel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, HD wash table – HD brush wash table The wash table features an adjustable 60 bar high-pressure pump, allowing for cleaning within an enclosed workspace. Cleaning is performed using an aqueous degreaser (10 kg included in the scope of delivery) at approximately 45°C. - Viewing window with lighting - Media filtration via cartridge filter - Convenient operation via foot switch - Including rotary table Technical data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm - Load capacity: 50 kg - Working pressure: adjustable up to max. 60 bar - Pump output: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank capacity: 170 l Iaodpfx Afehl Ifzj Tjl - Heating capacity: 4,000 W - Total power: 8.0 kW - Voltage: 400 V AC 1P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm

Stanje: novo, Leto izdelave: 2025, Front-opening blast cabinet is a significant convenience when working with large and heavy workpieces. Telescopic actuators installed in the door facilitate easy opening. The sandblaster is equipped as standard with a built-in dust extraction system to remove dust generated during blasting. It comes complete with a set of nozzles, a blasting gun, and protective window stickers. Machine Description Dust-free operation is ensured by the use of perimeter seals, allowing for environmentally friendly work. The blasting hose is positioned in the lower part of the collection container. A drainage opening enables quick media changes. The sandblaster is used for cleaning and treating various surface types, e.g., removing rust, paint, and residues from metal surfaces such as automotive parts, engines, fittings, housings, wheels, rims, etc. Suitable abrasive media include: quartz, silicon carbide, glass beads, plastic sand, emery, and other materials. Technical Specifications – KDP350TOP WORKING CAPACITY: 330 L (0.33 m3) OPERATING PRESSURE: 4 - 8 bar AIR CONSUMPTION: 400 - 700 l/min AIR CONNECTION: 1/4" QUICK COUPLING VIEWING AREA: 580x270 mm EXHAUST CONNECTION (VENTILATION): ø 63 mm and 90 mm INTERNAL CABIN DIMENSIONS (Width x Depth x Height lowest/highest point): 890 x 655 x 360/610 mm OVERALL DIMENSIONS: 960x720x1500 mm WEIGHT: 64 kg Standard Equipment Iodjm Ncb Eopfx Af Toal - DC15 cyclone extractor - Work area lighting – 12 V fluorescent lamp (230 V power supply, with switch) - 2 high-quality rubber work gloves integrated with the device - 2 extraction/ventilation connectors (ø 64 mm and 90 mm) for connecting an extraction unit - Blasting gun with eight interchangeable ceramic nozzles - 4 pieces of protective film for the window/viewer - Front door with perimeter rubber seals for dust-free operation - Instruction manual in Polish Please note the device requires self-assembly. The price shown is NET and does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, Leto izdelave: 2025, -TFON stroj za precizno oblanje i završnu obradu rubova. -Dizajniran za vrhunsku završnu obradu površina i oblanje rubova širokog spektra materijala i industrija, sustav TFON objedinjuje naprednu automatizaciju i prilagodljive konfiguracije kako bi zadovoljio vaše specifične proizvodne zahtjeve. Kompatibilnost s materijalima: Prikladan za obradu aluminija, nehrđajućeg čelika i mekih čelika. Širok raspon debljina: Iedpfx Ashq A Txsf Teal Učinkovita obrada materijala debljine od 0 do 120 mm. Izvrsna završna obrada: Konstruiran za postizanje visokokvalitetne površinske obrade koja poboljšava estetiku i funkcionalnost proizvoda. Industrijska svestranost: Idealan za industrije medicinskih uređaja, profesionalne kuhinjske opreme, automobilske dijelove i metalnu galanteriju. Precizno zaobljavanje rubova: Pouzdano izvodi precizno zaobljivanje s polumjerom R2, čime se povećava sigurnost i poboljšava izgled završnog proizvoda. Napredna automatizacija: Integrirani Siemens upravljački sustav omogućuje povećanu preciznost i operativnu pouzdanost. Nezavisne radne stanice: Osiguravaju fleksibilnu i učinkovitu višestupanjsku obradu prilagođenu složenim proizvodnim tokovima. Višestruke opcije širine stola: Dostupno s širinama stola od 650 mm, 1000 mm ili 1300 mm, prema zahtjevima vaše proizvodnje. Prilagodljive opcije transportera: Moguć izbor vakuumskog, polumagnetskog ili poluvakuumskog transportnog sustava za sigurno rukovanje komponentama. Čišćenje površine: Učinkovito uklanja hrđu, okside i površinske nečistoće, pripremajući dijelove za daljnju obradu. Povećana sigurnost operatera: Stanica za zaobljavanje rubova umanjuje rizik od posjekotina i ozljeda na oštrim rubovima. Vrhunska završna obrada: Opremljen Scotch abrazivnom tehnologijom za postizanje ravnomjernih i glatkih površina. Dug vijek trajanja abraziva: Pneumatski oscilacijski sustav produžuje životni vijek abrazivnih traka i Scotch materijala, smanjujući zastoje. Konstantan izlaz radijusa: Šest lamelnih kotaca osigurava jednoliku obradu rubnih radijusa na svakom komadu radi postizanja ujednačene kvalitete. Konstruiran za performanse. Dizajniran za sigurnost. Izgrađen za industrijsku svestranost. TFON – Perfekcija površinske obrade svaki put.

Stanje: novo, Leto izdelave: 2025, Ustrezni material: kovina Stanje: novo Tip laserja: vlakenski laser Delovna površina: 3000 × 1500 mm Hitrost rezanja: 0–40.000 mm/min Podprti grafični formati: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Debelina rezanja: 0–30 mm Iedpfx Asg Eghdef Tjal CNC: Da Način hlajenja: hlajenje z vodo Krmilna programska oprema: Bodor Thinker Država porekla: Kitajska Blagovna znamka: Bodor Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: Bodor Blagovna znamka laserske glave: bodorgenius Blagovna znamka krmilnega sistema: bodorpro Teža (kg): 2.200 kg Ključna prodajna prednost: posteljna konstrukcija s tenonsko-utorjenim varjenjem pločevine Garancija: 3 leta Moč laserja: 1000 W Napajanje: 110V / 220V / 380V 50/60 Hz

Leto izdelave: 2025, Stanje: novo, Ultrazvočna kad UEC 300 je industrijska rešitev za čiščenje velikih in težkih delov, ki so močno umazani. Naprava je opremljena s pnevmatskim dvigalom s kapaciteto do 200 kg. Delovna frekvenca znaša 28 kHz s sweep tehnologijo. Stroj obsega glavno ultrazvočno kad s tremi stranskimi ultrazvočnimi piezo pretvorniki ter dodatno nadglavno kad z oljnim separatorjem. Upravljanje poteka preko visokokakovostnega HMI zaslona na dotik z 3D prikazi obvestil. Celotna kad je izdelana iz kislinsko odpornega nerjavečega jekla AISI304 s debelino 2 mm. Tehnične lastnosti: Dimenzije platforme: 900x570 mm Največja nosilnost: 200 kg Uporabna višina: 400 mm Ultrazvočna moč: 3 kW (6 kW p-p) Ultrazvočna frekvenca: 28 kHz s sweep funkcijo Moč grelca: 9 kW Iedpfsgd Uifox Af Tjal OPREMA: 7" zaslon na dotik z 3D obvestili Avtomatski sistem za polnjenje vode Avtomatski način delovanja dvigala Senzor nivoja tekočine Senzorji položaja dvigala Senzor pokrova Garancija: 2 leti NA ZALOGI IMAMO TUDI DRUGE MODELE

Stanje: rabljeno, prevoženi kilometri: 19.950 km, prva registracija: 11/1989, vrsta goriva: dizel, konfiguracija osi: 4x4, vrsta prenosa: mehanski, Leto izdelave: 1989, Oprema: pogon na vsa štiri kolesa, Mercedes-Benz 1428 AF 4x4 (center and rear axle differential locks, low-range gearing) with 7 seats Iasdpfx Afjfarx Us Tjl Water tank: 2,500 liters Pump: Metz with 2,800 l/min capacity Additional equipment: Rapid intervention hose reel on right side with 50-meter hose Dimensions (LxWxH): 7,100 x 2,300 x 3,000 mm Wheelbase: 3,800 mm Tires: 275/70 R22.5

Stanje: novo, At variable speed, ISO 40. Powered cross table on all axes. 3-axis digital readout included. Base with chip tray. Coolant system. LED lamp. Mechanical speed indicator. Motorized axes with variable speed and rapid traverse. Manual pump guideway lubrication system. Milling capacity with insert cutter: 100 mm. Milling capacity: 35 mm. Drilling capacity in cast iron with pilot hole: 60 mm. Iasdpfx Ajh Im H Sef Tol Max drilling capacity in steel with pilot hole (S235JR): 24 mm. Spindle taper: ISO 40 DIN 2080. Quill: 86 mm. Spindle travel: 120 mm. Head tilt: +/- 45°. Vertical head rotation: +/- 90°. Head body rotation: +/- 180°. Vertical spindle speed: (2) 60 ÷ 500 | 500 ÷ 3600 rpm. Motor: 400 V 50 Hz 2.25 kW. Distance between spindle nose and table: 45 – 395 mm. Distance spindle axis – column: 215–450 mm. Table size: 1246 x 230 mm. Longitudinal table travel: 850 mm. Cross table travel: 310 mm. Max load capacity: 400 kg. Dimensions: 1680 x 1500 x 2100 h mm. Net weight: 1000 kg.

Stanje: rabljeno, Leto izdelave: 2016, Milling Machines Travel X-axis: 600 mm Travel Y-axis: 560 mm Travel Z-axis: 210 mm HSC Machine Number of axes: 3 Iedpfovtfp Ejx Af Toal Milling machine / Machining center Control: Siemens 840D_sl Spindle taper: SK 40 Spindle speed: 12,000 rpm Table size X: 900 mm Table size Y: 560 mm Max. workpiece weight: 400 kg Tool changer: 30-position Feed rate: 30,000 mm/min