CNC center za struženje in rezkanje

GILDEMEISTER GMX 300 linear

Stanje: rabljeno, Leto izdelave: 2007, Double-spindle machining center in 5-axis configuration (on both sides) Travel paths X/Y/Z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool pockets Tool holder: HSK 63 CNC control: Siemens 840D Lhjdpfx Adjtgu Ixeksd 1 x tool breakage control 2 x clamping bridge supports H75 mm 2 x clamping bridges for 5th axis Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x drilling head indexing unit 2 x tool length measuring system 2 x upgrade kit for torsion compensation A-/U-axis

Stanje: dober (rabljeno), Leto izdelave: 2007, Used lathe by OKUMA - Model: LT200-M TwinStar - Year of manufacture: 2007 Lhodpfov S Svvex Adkjd - Including loading robot and loading carousel - Including chip conveyor - Coolant tank - Immediately available

Stanje: rabljeno, Leto izdelave: 2009, X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Control: SINUMERIK 840D Spindle speeds – stepless: 5 – 10,000 rpm Drive power at 40% duty cycle: 38.00 kW Drive power at 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Spindle taper: HSK 100 Feed rate X/Y/Z axis: 0 – 60,000 mm/min Rapid traverse X/Y/Z: 60 m/min Feed force X/Y/Z: 12.00 kN B-axis: 180 x 0.001° Rapid traverse B-axis: 10 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360 x 0.001° Table rotation speed – stepless: 1 – 800 rpm Table drive power: 13.85 kW Max. torque at faceplate: 1,550 Nm Tool magazine: chain magazine, 60 positions Tool diameter: 110 mm Tool diameter with 2 free locations: 230 mm Max. tool length: 450 mm Max. tool weight: 30.00 kg Total connected load: 80.00 kW Machine weight approx.: 18.00 t Installation dimensions approx.: 7.50 x 5.50 x H3.50 m 5-axis machining centre with SIEMENS Sinumerik 840D control, band filter system 980 l, chip conveyor, coolant through spindle, extraction unit, BLUM tool measurement, probe, operation mode 4, tool taper cleaning, hydraulic clamping with proportional valve. Lhodpfox Tiy Tex Adkod

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). Ljdpfxjt Hwuce Adkohd " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 640 mm Maximum turning diameter 640 mm Control Siemens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - Bar capacity 65 mm Chuck diameter 200 - 315 mm Spindle bore diameter 80 mm Main spindle front bearing diameter 120 mm --- Counter spindle --- Bar capacity 65 mm Chuck diameter 315 mm Spindle bore diameter 80 mm Front bearing diameter 120 mm - - - - - General Data - - - - - - - - - - - Lodpfsvx U A Sox Adkohd Spindle distance 1,500 mm Turning length 1,185 mm Main/counter spindle speed 5,000 rpm Driven tool speed 12,000 rpm Slide travel X1, Y1: 550 / 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm CNC Turning and Milling Centre | DMG GILDEMEISTER - GMX 250 linear with Main/counter spindle, chip conveyor, tool changer, turret set up for driven tools, and equipped with a gantry loading system (Pneumotec portal system S-01623a). The machine has only approximately 32,000 operating hours. The machine is in very good condition and can be inspected. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Leto izdelave: 2024, stanje: novo, Universal Testing Machine H 5 TMNI (L) 250mm Extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screw spindles, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 test space up to nominal load: Working space width: 420 mm Max. test stroke without test tools, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1325 mm Ljdeiq Hxvjpfx Adkohd Travel Speeds: Test speed: 0.001 – 1200 mm/min up to nominal load Return speed: 1200 mm/min Force Measurement: Measuring range depending on the force sensor used: 0.4 – 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Force measurement resolution depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this effort will be charged separately. Crosshead Travel Measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Stanje: rabljeno, Leto izdelave: 2004, Mazak Multiplex 6300 Mazatrol 640T Leto izdelave: 2004-11 Ledpsv Tvkaefx Adkehd Približno 20 orodij Mazak Flex-GL200F Več informacij sledi kmalu.

Leto izdelave: 2004, stanje: dober (rabljeno), A well-maintained used double-miter cold circular saw from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut function - Hydraulic clamping devices - Central lubrication for saw guides - Coolant system - Documentation included Saw blade diameter: 350 mm Cutting capacity: - Round 90°/45°: 100/100 mm - Square 90°/45°: 100x100/100x100 mm - Rectangular 90°/45°: 170x100/130x100 mm - Shortest remnant length for single cut at 90°: 30 mm - Shortest remnant length for automatic operation at 90°: 260 mm Working height: 950 mm Dimensions (W x D x H): 1530 x 1348 x 1890 mm Weight: 980 kg Lhjdpokfvhksfx Adkod For further technical details, please refer to the PDF document. Technical data and dimensions: Subject to change/errors.

Stanje: rabljeno, Leto izdelave: 2019, moč: 30 kW (40,79 KM), volumenski pretok: 4,95 m³/h, tlak (maks.): 12,75 letvica, Zračni kompresor Atlas Copco AQ30VSD FF Proizvajalec: Atlas Copco Tip: AQ30VSD FF Leto izdelave: 2019 Kraj izdelave: Belgija Maksimalni tlak: 12,75 bar Moč: 30 kW Zmogljivost: 4,95 m³/min Prostorninski pretok: 82,5 l/s, 174,8 cfm, 4,95 m³/min Ljdpfx Aexk U Arjdkohd Moč motorja: 40 KM Hitrost motorja: 8600 vrt/min Teža: 702 kg Napajanje: 400 V, 50 Hz, 3 faze Izvedba: Brez olja ISO razred: 8573-1 Class 0 Krmiljenje: Elektronikon Graphic Oprema: SMARTLINK Izvor: Izdelano v Belgiji Za pravilnost, popolnost in ažurnost podatkov ne jamčimo.

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. No.: 10489 Manufacturer: DMG Model: DMC 60 U duoBLOCK Year of manufacture: 2011 Control type: CNC Control system: SIEMENS SINUMERIK 840D Location: Halberstadt Country of origin: Germany Machine No.: 11XX000XX01XX Comprehensive overhaul: 2025 X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-axis: -30° to 180° C-axis: 0.00° Spindle taper: HSK A63 DIN 69893 Max. workpiece weight: 600 kg Max. rotary table diameter: 630 mm Table rotation speed range: 40 rpm Tool magazine capacity: 60 pcs. Stepless speed range: 20 – 18,000 rpm Max. torque: 121 / 82 Nm Feed force (X/Y/Z): 10 kN Rapid traverse X/Y/Z: 60,000 mm/min Spindle motor output: 28 / 19 kW Acceleration: 6 m/s² Total power requirement: 55 kW Approx. machine weight: 12 t Lhjdjycpxgepfx Adkod Approx. dimensions (LxWxH): 7.0 x 5.0 x 3.2 m Number of pallets: 2 Pallet size (LxW): 630 x 630 mm Tool change time: 3.7 sec Additional information: DMG DMC 60 U – 5-axis universal machining centre (year 2011) The machine is still in production and has been used exclusively for aluminium machining in single-shift operation. It is equipped with a pallet changer and a high-pressure coolant system (30 bar). In 2024, extensive maintenance and renewal works were carried out: ✅ All axes (except Z-axis) renewed ✅ Guide rails replaced ✅ Spindle overhauled Complete maintenance and service reports, as well as all relevant documentation, are available in full. Further technical data: 🔹 Working areas: Distance spindle centre – table (horizontal): 20 – 620 mm Distance spindle centre – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & accessories: ✅ Complete documentation available ✅ Swarf conveyor for efficient chip removal ✅ Coolant system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimum performance ✅ Pallet changer for uninterrupted operation ✅ Rotating viewing window for a clear view of the machining process ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for convenient operation ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant cleaning ✅ Spindle oil cooler for thermal stability The machine can be inspected and tested during ongoing production by arrangement. 📍 Availability: By agreement