Večvretenski stružnica

GILDEMEISTER AS - 16

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled Dcedpfeuhauyox Anusn - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Dcsdpomf Aw Asfx Anusn Number of spindles: 8

Stanje: pripravljen za uporabo (rabljen), rotary transfer machine RT100/12-26 Dsdpfx Anei Ewn Ejuecn Manufacturer: Pfiffner Serial number: 1101141101 Operating hours: 42,500 Footprint: 14m x 8m

Stanje: rabljeno, DONNÉES TECHNIQUES - Nombre d’axes : 7 - Nombre de broches : 2 BROCHE PRINCIPALE - Ø max. de la barre : 32 [mm] - Longueur maximale usinable : 250 [mm] - Vitesse de broche : 7000 [tr/min] - Incrément minimal axe C : 0,1 [deg] CONTRBROCHE - Ø max. de la barre : 32 [mm] - Vitesse de broche : 7000 [tr/min] - Nombre de porte-bagues : 2 PORTE-BAGUES 1 - Nombre de positions : 5 - Nombre de positions motorisées : 4 - Vitesse outil motorisé : 5000 [tr/min] PORTE-BAGUES 2 - Nombre de positions : 5 TOURILLON FRONTAL - Nombre de positions : 5 OPÉRATIONS SECONDAIRES - Nombre de positions : 4 ALIMENTATION ÉLECTRIQUE - Tension d’alimentation : 380 [V] DIMENSIONS ET POIDS - Encombrement : 2150x1500 [mm] - Hauteur de la machine : 1800 [mm] - Poids de la machine : 2800 [kg] HEURES MACHINE - Heures de fonctionnement : 23 884 [h] ACCESSOIRES - Commande numérique : Fanuc - Lampe de statut tricolore - Prise de pièces - Éjecteur de pièces - Réservoir de liquide de refroidissement Dedeyhrlyepfx Anujcn - Chargeur de barres hydraulique marque/modèle : IEMCA BOSS 332

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Dedpfein Ub Tox Anuscn Equipment: – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, vrsta goriva: električni, Diesel Compact Forklift, Manufacturer: RMF MAXEIN, Type: KSL 70D Year of manufacture: 2000, Lifting capacity: 7 t Fork length: 1.4 m, Lift height: 3.6 m Dimensions: Length with forks 4 m, Height 2.7 m, Width 1.5 m Dcedpfe Tfywex Anujn Hydraulic fork positioner, triplex mast. Operating hours: 9,800 h With new safety inspection (UVV) upon purchase. Immediately operational.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 51.488 h, Ta švicarski CNC stružnica Citizen CINCOM A32-VII CL je bila izdelana leta 2014. Opremljena je z glavnim vretenom s kapaciteto 32 mm, protivretenom in največjo dolžino struženja 3000 mm. Ponaša se s hitrim sistemom CHIDOMI, ki omogoča hkratno gibanje po vseh oseh in ponuja podajalno hitrost do 9.000 mm/min. Razmislite o priložnosti za nakup te švicarske stružnice Citizen CINCOM A32-VII CL. Kontaktirajte nas za dodatne informacije o stroju. Djdpfx Aex D Nhpenujcn Vrste uporabe: Struženje

Stanje: dober (rabljeno), Leto izdelave: 2004, We are selling a used recycling machinery system with the following components (year of manufacture: 2004): Dedpfx Aori N D Isnuecn - Chip crusher type RS 300 E with coarse material outlet (manufacturer: Steimel) - Drag chain conveyor with torque shut-off (manufacturer: DGS) - Chip centrifuge AZ - 250 with feed hopper (manufacturer: ARP) - Vacuum lock VSS 100 (manufacturer: ARP) - Pump sump (manufacturer: ARP) - Vibrating screen - Control cabinet The system is fully operational and ready for collection.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] - Max. bar diameter: 20 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [degrees] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [degrees] Dcsdpfjwd Ud Ejx Anuon - Minimum B-axis resolution: 0.001 [degrees] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 24 SUBSEQUENT MACHINING - Number of positions: 4 - Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Power-on hours: 12,249 [hrs] - Operating hours: 1,816 [hrs] EQUIPMENT - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank - Parts remover - Parts conveyor belt - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Max. workpiece diameter: 25 mm, max. workpiece length: 100 mm, max. bar diameter: 25 mm, max. X/Z travel: 42 mm / 50 mm, rapid traverse: 40 m/min, number of spindles: 6, spindle speed: 12,000 rpm, control: Siemens 840D Powerline. Dsdpfx Anstqfq Uouscn