Obračalnik za varjenje, naprava za obračanje rezervoarja

Gieseking KT 600

Stanje: dober (rabljeno), Welding positioner Gieseking, 600 kg load capacity Good condition Continuously variable speed approx. 0.01 to 1.5 rpm Fsdpfx Ajlamrwsfljpb With foot remote control Diameter 0.8 meters Height horizontal 0.95 meters Height when tilted to the center of the plate 0.8 meters Length 1.2 meters Width 1.1 meters

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM Group 2M Operating voltage 400 V Fodpevx E Ncjfx Aflopb Control voltage 230 V Flange width 300 mm Immediately available from stock

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Fsdpfjg Tdpgox Aflopb Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Fpsdpfx Afed Ab H Hsljb Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Article: Welding Positioner 50 kg Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilting angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Fodpjbambrjfx Aflepb Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Fpedsrypmgjpfx Afleb Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Fsdsvx E I Sjpfx Afljpb Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3 m/min Crab travelling speeds 20/5 m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Multiple units immediately available from stock

Stanje: novo, Leto izdelave: 2024, nosilnost: 5.000 kg, Complete set incl. hand and dual foot remote control Fodjl Dq U Ujpfx Aflspb Digital speed display Hydraulic height adjustment Dimensions: Tilted height min: 800 mm Tilted height max: 1900 mm Horizontal height min: 1050 mm Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Rotational speed from 0.01 to approx. 0.9 rpm CE certification

Leto izdelave: 2018, Stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Fpodpfx Aehua Dqofleb Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Leto izdelave: 1960, Stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Fpsdjcblc Sepfx Aflob Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t