Hidarulni tisk

Gidropress P315

Hydraulic frame press for punching sheet metal with a force of 630 tons, designed for cold forming.

The vertical frame press, built in a welded construction, consists of a table and an upper platen connected by bolts. A control cabinet is installed next to the press, and an oil overflow tank is located deep in the foundation to facilitate filling the press system with oil. The press units are removable, which makes installation and maintenance easier.

Operation is by push-button control. The slide stroke length is ensured by adjusting the end-stop position.
Gtjdpfxepgkt Se Afqjt

Technical specifications:

1. Rated pressing force: 630 tons
2. Rated working pressure of fluids: 2,200 kN/cm²
3. Slide stroke: 750 mm
4. Slide speed, mm/s:
a) at idle speed: 215
b) during working stroke: 10
c) during return stroke: 120
5. Maximum distance between table and slide: 1,400 mm
6. Distance between uprights: 2,200 mm
7. Table dimensions, mm:
a) left to right: 2,220
b) front to back: 1,800
8. Thickness of embossing plate: 220 mm
9. Table height above floor: 410 mm
10. Rated force of hydraulic cushion: 250 tf
11. Hydraulic cushion stroke: 350 mm
12. Ejector speed, mm/s:
a) on ascent: 51
13. Press overall dimensions, mm:
a) left to right: 5,070
b) front to back: 3,000
c) height: 7,065
14. Press height above floor: 5,480 mm
15. Press weight: 69,400 kg

Electric motor speed: 1,450 min⁻¹
Operating voltage: 400/230 V
Mains frequency: 50 Hz ± 1 %
Rated air pressure: 0.7 Pa

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.