Linija za premazovanje z UV valjčki

Giardina e Superfici

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN2018080, skupna dolžina: 12.860 mm, skupna širina: 4.806 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, dolžina podajanja os X: 3.000 mm, delovna širina: 350 mm, moč: 25 kW (33,99 KM), pply/reTRC 1500 – Houtreparatie- en Cosmetica Machine Technische Beschrijving • Systeemoverzicht • Processtroom Systeemoverzicht De Wintersteiger TRC 1500 is een volledig geautomatiseerd industrieel systeem, ontworpen voor het detecteren en repareren van defecten in houten planken. Het combineert geavanceerde 3D-scantechnologie met hogedruk thermoplastinjectie om consistente, hoogwaardige reparaties te realiseren op productiesnelheid. Defecten worden hersteld met thermoplastisch vulmateriaal door middel van injectie- en applicatie-units. Dankzij de nauwkeurige berekening van de vulhoeveelheid en precisie-injectie wordt geen vulmateriaal verspild. Ook de kanten kunnen worden gevuld. Belangrijkste kenmerken • Geautomatiseerde 3D-lasertriangulatie voor defectdetectie • Hogedruk thermoplastinjectie voor duurzame reparaties • Precisiebewerkingsunit voor cosmetisch perfecte afwerking • Onafhankelijke smelt-temperatuurzones met 8 kg tank • Gesloten glycol-waterkoelsysteem voor gecontroleerde uitharding • Ethernet-gebaseerd besturingssysteem met remote onderhoud • Onbeperkt aantal productprofielen en intuïtieve scannerinterface Productbereik (Werkstuk-specificaties) Lengte: 500–3000 mm Breedte: 100–350 mm Dikte: 3–30 mm Productiesnelheid: tot 10 m/min – afhankelijk van aantal en grootte van de defecten Vulsysteem – Injectie- & Applicatie-units • Injectie-unit: • 3-assige positionering (X/Y servo-aangedreven, Z pneumatisch) • Drukgereguleerde smelttoevoer • Hogedrukinjectie • Applicatie-unit: Chodox Dmdhspfx Aiqec • 3-assige besturing • Fijne nabewerking van gerepareerde zones Foutdetectie: Spot Eye Scanner • 3D-lasertriangulatie en hogesnelheid-camerasysteem • Detecteert defecten vanaf ca. 1 mm diepte • Automatische hoogteaanpassing • 2D + 3D meting • Instelbare parameters voor verschillende houtsoorten Smeltunit • 8 kg tank • Onafhankelijke temperatuurzones • Geïntegreerde zuigerpomp voor constante druk Koelunit • Gesloten glycol-water circuit • Stabiele temperatuurregeling Besturingssysteem • Ethernet-gebaseerde communicatie met remote onderhoud • Toegang tot PLC, scanner, servoaandrijvingen • Energie-efficiënte regeneratieve aandrijftechnologie Scannersoftware • Verwerkt 3D-lichtprofielen • Berekent defectvolume en coördinaten • Onbeperkte productprogramma’s • Intuïtieve bedieningsinterface Hogedrukinjectieproces 1. Smelten van het thermoplastische materiaal 2. Druk- en temperatuurregeling 3. Gerichte injectie in het defect 4. Directe koeling 5. Minimale oppervlakte-residu • Voordelen: • Laag materiaalverbruik • Uitstekende hechting • Geen aantasting van omliggende houtstructuur Systeemarchitectuur • Smeltunit • Verwarmde slangen • Injectiekop • Koelplaat • Koelunit met retourstroom

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Chsdpovvi Rfjfx Aiqsc Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: dober (rabljeno), Leto izdelave: 2014, DIP TECH GlassJet NOVO digital printer: Print resolution: 720 dpi Ink colors: black, etch-like, white and other special colors Maximum glass size: 2200 x 1200 mm (width x height) Minimum glass size: 400 x 400 mm Chsdpfx Ajiukuuoiqsc Glass thickness: 2–19 mm Printing speed: up to 30 m2/h (with 8 print heads for one color) Number of required operators: one Overall dimensions: 2,500 x 4,700 x 2,000 mm (width x length x height) Image format: All standard image file formats including PDF, PS, EPS, Tiff, BMP, JPEG Ambient temperature: 18–25 degrees Celsius Power supply: Single-phase 400 VAC x 16 A 50/60 Hz

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Chedpfx Aexq Tbteiqoc Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Four-Sided Planer Weinig Powermat 500 Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle arrangement: Bottom – 5.5 kW, 8000 rpm Right – 5.5 kW, 8000 rpm Left – 7.5 kW, 8000 rpm Top – 7.5 kW, 8000 rpm Bottom – 7.5 kW, 8000 rpm Universal – 5.5 kW, 8000 rpm Spindle no. 6 equipped with PowerLock system Feed speed adjustable via inverter up to 30 m/min Feed rollers in the working table (one grooved roller for wet wood) Electromotor-driven adjustment of working height and width Pneumatic material hold-downs Drive via cardan shafts Total power: 41 kW Chsdpfxevfr Rgo Aiqec Year of manufacture: 2005 CE Certificate

Stanje: novo, Tip: 1300-2S Delovna širina: 1300 mm Minimalna delovna dolžina: 400 mm Delovna debelina: 2–80 mm Hitrost brusnega valja – s frekvenčno regulacijo Hitrost podajanja: 5–20 m/min Skupna moč motorjev: 6,27 kW Transportne dimenzije: 1700 x 2100 x 1400 mm Teža: 1200 kg Chjdpfx Aism Dr Rgjqsc Cena: 6.100 EUR (EXW Jonava, Litva)

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Olupljanje s frezalno glavo, maks. dolžina 6000 mm, 35 kW, z mehanizacijo. Codpfxexpuzro Aiqohc

Stanje: zelo dobro (rabljeno), skupna dolžina: 3.000 mm, skupna širina: 1.500 mm, Stiskalnica za plošče v zelo dobrem delovnem stanju + finger jointing Grecon Csdpfjt Uduxex Aiqehc

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options Chjdpfx Aish I Nqwsqoc • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Dolžina poravnalne mize: 2500 mm Pogonski motor podajalnika: 4 kW Hitrost podajanja: 5–30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, CNC-osno/radialno krmiljenje ----- Stroj je trenutno pri nas v postopku obnove! Slike pred demontažo in trenutno v procesu obnove! Kratek povzetek: ----- - 5 vreten s 8.000 obr/min - 4 x HSK/Powerlock - CNC-nastavitve vreten v osni in radialni smeri preko krmiljenja - CNC-krmiljena nastavitev in pozicioniranje podajalnika - Mizne plošče z vodilnim nožem pri vretenih 2 in 3 - Vključno s povratnim sistemom Weinig/Neumann RF 15 Podroben opis: ----- Tehnični podatki: Delovna širina: 20–230 mm Delovna višina: 8–120 mm 1. Nastavek za orodje – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Obratov: 6.000 obr/min Krog gibanja noža: 93–145 mm Nastavitev osi: 5 mm Zaoplitvena enota MarathonCoatin za mizno vlogo pred 1. spodnjim nastavkom za orodje 2. Nastavek za orodje – PowerLock – desno ----- Motor z zavoro: 7,5 kW Chjdpfx Aieyy A Iqoqjc Skupni motor z levim nastavkom za orodje Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. premer orodja za ravnilno mejo: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno osno CNC-krmiljeno Mizne plošče z vodilnim nožem 3. Nastavek za orodje – PowerLock – levo ----- Motor z zavoro: skupni motor z 2. vretenom Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno CNC-krmiljeno v osni in radialni smeri Mizne plošče z vodilnim nožem 4. Nastavek za orodje – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Krog gibanja za ravne rezilne glave maks.: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 40 mm Deljena pritisna noga pred zgornjim nastavkom za orodje, nastavljiva po krogu gibanja orodja in zložljiva, vzmetena. Pritisna noga pred in odvod po zgornjem nastavku z elektronskimi digitalnimi prikazi, integrirani v spominsko funkcijo Vreteno radialno CNC-krmiljeno 5. Nastavek za orodje – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Maks. globina profiliranja: 15 mm Nastavitev osi: 35 mm Podajalni sistem ----- Frekvenčno krmiljen podajalnik, brezstopenjsko nastavljiv z zavoro: 4 kW, 5–30 m/min Vlečni valj pred 1. spodnjim orodjem pnevmatsko dvig/nizko krmiljen Durofer valji s koničastimi zobmi (Weinig patent) z omejevalnikom globine in samoočiščevalnimi...