Stroj za elektroerozijsko globljenje

GF Machining Solutions FORM P900

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: Njdoxgnz Tepfx Adyewb - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 109.078 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 45.000 m/min, model krmilnika: Siemens 840 D, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Stroj VKLOP: 109078 h / Vreteno VKLOP: 22117 h - Vreteno HSK-A63 10000 min-1 - 32 mest za orodje - Rotacijska miza SRT 280 mm z integriranim vpenjalnim sistemom SK50 (če ni potrebna, se lahko zapre ali se prilagodi za uporabo kot sistem pritrdilne ničle) - Zunanja dovod hladilne tekočine - Notranja dovod hladilne tekočine s papirnim trakom filtrom 80 bar - Pištola za spiranje ostružkov - Transporter ostružkov - Ročni upravljalni modul - Samodejna kabinska vrata - 32 mest za orodje plus še 87 mest ZM87 - Toplotna kompenzacija - BLUM merjenje orodja Wange - Merilna sonda Renishaw - Posoda za ostružke - Signalna luč Nwjdpjxcp Slefx Adysb Stroj je bil v celoti pregledan in na voljo so geometrijsko poročilo ter meritve krožnosti. Stroj je možno kadarkoli pod elektriko pregledati in preizkusiti. Zelo dobro vzdrževano stanje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GS1000/5-T, največja hitrost vrtenja: 30.000 obr/min, skupna masa: 15.500 kg, Letnik izdelave: 2014 Stanje: zelo dobro Magazin: 66 x HSK63 Krmiljenje: Heidenhain 530 Vreteno: n=30.000 V mizi integriran Erowa sistem ničelne vpenjalne točke Erowa robot easy 250 avtomatizacija s 6 paletami 3D merilni sistem Njdpfx Asw Awmtsdyowb Oljno-zračna mazalna enota za visokofrekvenčno vreteno Lasersko merjenje Delovne ure vretena:

Stanje: novo, POPOLNOMA NOVO OBDELOVALNO SREDIŠČE HEIDENHAIN TNC 7 digitalno tirno krmiljenje z 19" zaslonom HEIDENHAIN paket (motorji, merilni sistemi in ročno kolo) X-os: 650 mm Y-os: 700 mm Z-os: 645 mm Premer mize: 410 mm Maksimalni premer obdelovanca: 500 mm Maksimalna hitrost vretena: 12.000 min⁻¹ (oljno hlajeno z MMS) Vpenjalna glava vretena: SK 40-BIG PLUS (BVD 40) Maksimalna moč vretenskega motorja: 17 kW IKZ – notranja dovod hladilne tekočine – 20 bar Hitri pomiki X,Y & Z: 30.000 mm/min Natančnost pozicioniranja: ± 0,005 mm Nedpfx Adjhy Artsyjwb Ponavljivost: ± 0,003 mm Menjalec orodij z dvojno roko: 30-kratni (opcijsko do 80 orodij) Transporter ostružkov z verižnim trakom Popolno ohišje Odgovarjamo le na povpraševanja iz Nemčije / Le povpraševanja iz Nemčije bodo obravnavana

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Walter MINI POWER Nakladalnik Fanuc Nwjdexnkzfspfx Adyob

Stanje: rabljeno, Leto izdelave: 1997, potovalna razdalja osi X: 3.708 mm, pomik osi Y: 1.208 mm, pomik po osi Z: 1.002 mm, dolžina podajanja os X: 5.000 mm, dolžina pomika po osi Y: 5.000 mm, dolžina podajanja os Z: 5.000 mm, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 35 obr/min, CNC Bed Milling Machine - Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Nodpfxowtpfpe Adyswb Technical Data: X-travel: 3708 mm Y-travel: 1208 mm Z-travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35 - 3000 rpm Spindle motor: 22 kW Feed rate: 6 - 5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/- 120° (stepless) Milling head in the rear axis automatically swivelling / swing 90° Coolant system Machine can be inspected under power. Availability: immediately Sale from location Westerkappeln Dismantling and loading can be arranged upon request.

Stanje: zelo dobro (rabljeno), HERMLE C 42 U je 2 x 5-osni center z nakladalnim robotom, zasnovan za visoko natančnost in zanesljivost. Miza 400×400 mm, 450 kg, hodi X800 Y800 Z550 mm, os A ±130°. Vreteno HSK‑A63 0–18.000 vrt./min, 42 kW, 148 Nm; hitri pomiki 45/45/40 m/min. Magazin 42+160, 54 palet, robot KUKA, IKZ 80 bar, Renishaw/BLUM. Uporaba: avtomobilska industrija, letalstvo, urarstvo, medicinska tehnologija. Nsdpjx S I Akefx Adyewb

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: Nwsdpfxox Eh Iqj Adyob 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 720 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 640, največja hitrost vrtenja: 15.000 obr/min, General Spindle: Direct drive Speed: 15,000 rpm Power: 34 kW Nedpfjtpm Nijx Adyjwb Torque: 180 Nm Tool holder: SK 40 Tool changer: 90 stations Working Area Travel X: 720 mm Travel Y: 600 mm Travel Z: 500 mm Rotary/tilting table: D = 700 mm Table load: 350 kg C-axis resolution: 0.001 degree Other Rapid traverse X/Y/Z: 36 m/min Max. rotary speed B-axis: 25 rpm Max. rotary speed C-axis: 25 rpm Equipment Chip management: Chip conveyor Coolant supply: ICS 40 bar Workpiece measurement: Renishaw OMP 40 Tool measurement: BLUM laser bridge Software: Kinematic Optimizer

Leto izdelave: 2007, Stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup Njdommfwuepfx Adyjwb AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.