Center stružnica

GERD WOLFF G2930

Stanje: novo, Leto izdelave: 2025, Swing diameter over bed 290 mm Swing diameter / mm Turning length / mm Swing diameter over cross slide / mm Number of grinding units / pcs. Grinding width / mm Max. grinding height / mm Total power requirement / kW Machine weight approx. 310 kg Space requirement approx. 1400 x 700 x 1030 mm The following features and characteristics make the G2930 combination lathe unique and competitive in the market: 1. V-shaped guides provide higher stability and are securely anchored. 2. The gearbox is fixed for maximum stability and offers extensive feed and threading functions. 3. State-of-the-art tapered roller bearings support the D1-4 spindle with the highest precision. 4. Automatic vertical feed enables maximum threading capabilities. Bjdpfxoxb Eido Afqsdk 5. The cross movement is equipped with T-slots. 6. Guides are effectively controlled by adjustable jaws. 7. Advanced gearbox design with maximum functionality. 8. Maximum working area thanks to the lowered bed section. 9. Carriage-mounted spindle is operated by a lever arm. 10. Two feed screws are integrated. 11. User-friendly forward/reverse interface with zero backlash. 12. Versatile tailstock, which can be offset for taper turning. 13. Emergency stop switch, load switch, process control, etc. are installed. TECHNICAL DATA Max. swing over bed: 290 mm Max. swing over cross slide: 165 mm Distance between centers: 750 mm Spindle taper: MT5 Spindle bore: 38 mm Max. tailstock travel: 80 mm Tailstock taper: MT3 Longitudinal carriage travel: 560 mm Cross-slide travel: 140 mm Compound travel: 80 mm Cross feed: 0.017~0.25 mm/rev, 15 steps Longitudinal feed: 0.07-1.0 mm/rev, 15 steps Metric threads: 0.2-3.5 mm, 18 steps Imperial threads: 8-56 TPI, 21 steps Spindle speed range / steps: 50~1800 RPM, stepless Motor power: 1.5 kW Additional dimensions and weight: Overall dimensions: 1400 x 700 x 1030 mm Packing dimensions: 1450 x 750 x 970 mm Net weight: 290 kg Gross weight: 310 kg

Stanje: novo, Bernardo Lead and Feed Screw Lathe Master 180 incl. 3-axis digital display Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over gap*: 480 mm Swing diameter over cross slide: 220 mm Bed width: 185 mm Spindle bore: 51 mm Spindle mount: DIN 55029, D1-5 Speed range: (8 steps) 70 - 2000 rpm Longitudinal feed range: (32) 0.052 - 1.392 mm/rev Cross feed range: (32) 0.014 - 0.380 mm/rev Metric threads: (26) 0.4 - 7.0 mm Imperial threads: (34) 4 - 56 TPI Tailstock quill diameter: 42 mm Tailstock quill travel: 110 mm Tailstock taper: MT 4 Motor output S1 100%: 1.5 kW (400 V) Motor rating S6 40%: 2.2 kW (400 V) Machine dimensions (L x W x H): 1920 x 750 x 1600 mm Weight approx.: 540 kg * Removable bed section: 225 mm Scope of delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, acc. to DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Follow rest – max. passage diameter 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • 4-way tool post Bdjdpfx Ajd Du Tijfqsk • Protective device for 4-way tool post • Safety clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centres • Foot pedal with brake function in accordance with CE • Motor with magnetic brake according to CE standard • Machine base

Stanje: rabljeno, Swing over bed: 250 mm Swing over cross slide: . mm Bdedpowa Dz Ejfx Afqjk Distance between centers: approx. 400 mm Center height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drilling and turning jaws; Collet chuck with collets 1-20 mm in 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with safety interlock

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Bedpfxeqwgzqs Afqedk Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Bodpfxehhm Ede Afqsdk Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm Bdodpfxjrtd Uwj Afqjk - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 Bedpfx Aok Egrpefqsdk - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: novo, WM210V - ROGI VARIO METAL LATHE 230V-1Ph Swing over bed: ----- 210 mm Swing over cross slide: ----- 110 mm Centre height: ----- 105 mm Distance between centres: ----- 400 mm Bed width: ----- 100 mm Cross slide travel: ----- 75 mm Compound slide travel: ----- 55 mm Spindle bore: ----- 21 mm Spindle mount: ----- MT3 Spindle speed range: ----- variable 50 - 2500 rpm Thread cutting imperial: ----- 10 - 44 TPI (8) Thread cutting metric: ----- 0.5 - 3 mm (10) Quill travel: ----- 60 mm Quill diameter: ----- 30 mm Quill taper: ----- MT2 Motor power: ----- brushless 600 Watt Weight: ----- 75 kg STANDARD ACCESSORIES * 3-jaw 100 mm chuck - self-centering * 4-way tool post * Chip tray * Rear splash guard * Chuck guard * Leadscrew cover * Tool post guard * Change gear set * Digital speed display * Fixed centres * Forward / Reverse switch * Toolkit in case OPTIONS * 4-jaw 100 mm chuck - independent * Flange for 4-jaw 100 mm chuck * Fixed steady rest WM210V * Travelling steady rest WM210V * Faceplate WM210V * Stand/cabinet WM210V Bdedpjga Txcefx Afqjk

Stanje: zelo dobro (rabljeno), Univerzalni stružnica, stružnica, stružniška postelja, vodilno-vijačna stružnica -Proizvajalec: WEILER, vodilno-vijačna stružnica tip commodor 42 -Stružniško ležišče: kaljeno -Dolžina struženja: 900 mm -Premer struženja nad ležiščem: 400 mm -Premer struženja nad suportom: 190 mm -Vrtina vretena: Ø 56 mm -Vrtilna hitrost vretena: 45 - 2000 rpm Bsdpfx Aexapm Rsfqodk -Trivočna glava: Röhm Ø 200 mm -Štirivočna glava: Röhm Ø 200 mm -Konus konjička: MK3 -Pogonska moč: 4 kW -Dodatna oprema: 18x Multifix nosilec orodja, vrteča konica, glejte slike -Dimenzije stružnice: 2200/1300/H1410 mm -Teža: 1380 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Weiler Primus VC, Bedpfx Aov Ifxiefqedk Year of manufacture: 2000, Digital readout, Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix toolholder, 24 longitudinal feeds, Metric threads, Inch threads,