Površinski brusilni stroj - vodoravno
GER, Spanien Lizenz ELB RSA - 650

Name: GER, Spanien Lizenz ELB RSA - 650
Brand: GER, Spanien Lizenz ELB
Availability: InStock

Stanje

Rabljeno

Lokacija

Stockstadt am Rhein Nemčija

Površinski brusilni stroj - vodoravno GER, Spanien Lizenz ELB RSA - 650

Prikaži karto

Podatki o stroju

Oznaka stroja:: Površinski brusilni stroj - vodoravno

Proizvajalec:: GER, Spanien Lizenz ELB

Model:: RSA - 650

Stanje:: rabljeno

Cena in lokacija

Lokacija:: D-64589 Stockstadt

Pokliči

Podrobnosti ponudbe

ID oglasa:: A4462398

Referenčna številka:: 1124-100317

Posodobitev:: nazadnje dne 20.06.2024

Opis

Grinding length: 650 mm
Grinding width: 450 mm
Workpiece height: 425 mm (without magnetic chuck)
Max. workpiece weight: 600 kg
Machine weight approx.: 3.8 t
Total power requirement: 15 kW
Machine dimensions approx. W x H x D: 3.0 x 2.4 x 2.3 m

Used/overhauled surface grinding machine, manufacturer GER, type RSA-650.

Automatic feed on all 3 axes.

Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy verified.

SCOPE OF OVERHAUL:
Dedpfxofkg H Ts Apljkl

Machine completely dismantled, all components thoroughly cleaned and checked for full functionality.
Main spindle re-bedded with new bearings, runout 3 µm.
All guideways hand-scraped to new machine geometry.
Worn parts replaced, defective components repaired or replaced.
Reassembly, complete function check and internal acceptance.
Machine repainted.
Machine in flawless, production-ready condition.

MEASURED GEOMETRICAL ACCURACIES:
Current geometrical accuracy after overhaul, tested with dial gauge

Geometry of X and Z machine axes
X = longitudinal axis 650 mm
Z = cross axis 450 mm

Measurement performed with dial gauge across magnetic chuck.
X-axis = max. deviation 0.008 mm
Z-axis = max. deviation 0.005 mm

INCLUDING THE FOLLOWING ACCESSORIES:
- Electro-magnetic chuck, with fine longitudinal pole spacing
Dimensions 600 x 400 mm
- Demagnetizing device
- Complete coolant system with paper band filter
- Digital readout for vertical axis (Y-axis), manufacturer Sony
- Technical documentation in English
- 1 grinding wheel arbor
- 1 used grinding wheel
- 1 grinding wheel dresser, mounted above the grinding wheel with manual infeed
and automatic (hydraulically operated) cross feed
- 1 set of levelling elements

For further information, please refer to the attachment.

Payment:
100% prior to loading the machine

Warranty: 6 months on machine geometry and demonstrably installed new parts. No general statutory warranty.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Dokumenti

4462398-01.pdf

Ponudnik

Registriran od: 2009

25 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 6158 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Brezsredinski valjčni brusilni stroj CINCINNATI (3213)

Tatabánya

305 km

Brezsredinski valjčni brusilni stroj
CINCINNATI(3213)

1.900 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Stružnica - ciklično krmiljena VDF Boehringer DUS560 x 2000

Tönisvorst

851 km

Stružnica - ciklično krmiljena
VDF BoehringerDUS560 x 2000

Pokliči

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Dedju Sbkgspfx Aplokl Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Poglej podrobnosti

Mali oglas

Novazzano

465 km

Rezkalni stroj
TIGERFO 135

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots Dkedpjrqwbiefx Aplsl • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Poglej podrobnosti

Mali oglas

Industrijski roboti Universal Robots UR10e Series Cobot

Ponitz

558 km

Industrijski roboti
Universal RobotsUR10e Series Cobot

33.000 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Merilna postaja za merjenje hrapavosti in kontur HOMMEL-Etamic JENOPTIK Wavesystem T 8000 RC

Nemčija

661 km

Merilna postaja za merjenje hrapavosti in kontur
HOMMEL-EtamicJENOPTIK Wavesystem T 8000 RC

Pokliči

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear Feed Unit Waveline 60 Basic Measuring range: 60 mm Resolution: 0.014 µm Measuring Column Wavelift 400 CNC Dkjdpfx Apelxyp Hjlel Travel: 400 mm Positioning repeatability: < 10 µm Machine Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Full enclosure with electrically operated roller shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece holding plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurement  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard stone plate  Documentation

Poglej podrobnosti

Mali oglas

Brno-město

358 km

Vertikalni obdelovalni center
HAASVF-2

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, V 02/2026 novo hlajenje skozi vreteno. Vključen 4. os in sonde. Miza: 914 x 356 mm Osi: (X): 762 mm Dedpfxeyzpwuo Aplekl (Y): 406 mm (Z): 508 mm Največja obremenitev mize: 1361 kg Menjalec orodij: 24 pozicij Stožec v vretenu: ISO 40 Številko obratov vretena: 10.000 rpm Teža stroja: 3.311 kg

Poglej podrobnosti

Mali oglas

Oberhausen

844 km

Obdelovalni center
LAGUNL 1400

Pokliči

Stanje: novo, moč: 25 kW (33,99 KM), potovalna razdalja osi X: 1.430 mm, pomik osi Y: 670 mm, pomik po osi Z: 640 mm, teža obdelovanca (maks.): 1.200 kg, število mest v zalogovniku orodij: 30, proizvajalec krmilnikov: HEIDENHAIN, skupna višina: 2.900 mm, skupna dolžina: 4.855 mm, skupna širina: 2.945 mm, skupna masa: 11.000 kg, Oprema: CE označba, dokumentacija / priročnik, LAGUN L 1400 Machining Centre – Available at Short Notice The LAGUN L 1400 machining centre stands for high precision, robust construction, and efficient manufacturing. Ideal for single-part production as well as series manufacturing in mechanical engineering, tool and mould making, and subcontracting. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT Dkodshy Atfjpfx Apljl ✔ Financing / hire purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and is known for robust design, high dynamics, and long-lasting machine concepts. The machining centres impress with their reliability, easy maintenance, and low operating costs. Technical features: Control: HEIDENHAIN TNC 7 CNC control + 16" TFT monitor HEIDENHAIN motors, measurement systems and electronic handwheel HR 510 Chip removal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Full enclosure with side opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a customised offer

Poglej podrobnosti

Mali oglas

Bydgoszcz

807 km

CNC stružnica
DOOSANLYNX 2100LMA

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 510 mm, premer struženja: 300 mm, izvrtina vretena: 61 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 560 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – Year of Manufacture 2019 – Excellent Condition, Ready for Operation! Djdpfx Ajyftatsplekl For sale is a Doosan LYNX 2100LMA CNC turning center, a high-performance machine for the precise machining of rotational parts such as shafts, cones, spheres, as well as internal and external threads. The machine is in excellent technical condition, available immediately, and ready for inspection. Key features: - High precision and reliability for both series and single-part production - Large turret with 24 tool stations (including driven tools) - Control system: SIEMENS Sinumerik 828D - Powerful spindle and driven tools for maximum productivity - Spindle bore diameter of 61 mm enables the machining of a wide range of workpieces Technical specifications: - Year of manufacture: 2019 - Max. turning length: 510 mm - Max. turning diameter: 300 mm - X-axis travel: 210 mm - Z-axis travel: 560 mm - Swing over bed: 600 mm - Swing over tailstock: 400 mm - Spindle bore: 61 mm - Max. bar diameter: 51 mm - Max. spindle speed: 6000 rpm - Number of turret tools: 24 (including driven tools) - Control system: SIEMENS Sinumerik 828D - Dimensions (L x W x H): 2805 x 1582 x 1693 mm - Weight: 3500 kg The machine is fully operational, currently connected to power, and available for viewing.

Poglej podrobnosti

Mali oglas

Sredinski stružnica in stružnica za vreteno COLCHESTER MASTIFF VS 1800

Witten

812 km

Sredinski stružnica in stružnica za vreteno
COLCHESTERMASTIFF VS 1800

Pokliči

Stanje: novo, Leto izdelave: 2026, Swing diameter over bed 554 mm Swing diameter over cross slide 370 mm Turning length 2000 mm Centre height 280 mm Spindle bore 104 mm Dkedpfx Aowyd Tnoplsl Drive power 11 kW - New machine - with 2-axis ACU-RITE digital readout including constant cutting speed, MULTIFIX quick-change tool post size MC * For more information about the exact standard specification and available options, please visit our website or contact us directly *

Poglej podrobnosti

Mali oglas

Stroj za erodiranje žice Charmilles Robofil 240

Nürtingen

508 km

Stroj za erodiranje žice
CharmillesRobofil 240

Pokliči

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 750 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, lastna masa: 2.450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Overall system dimensions: 2020 x 2050 x 2000 mm Total system weight: 2450 kg The machine will be cleaned, overhauled, and tested by us prior to delivery. Dsdpfewqdrrjx Aplokl We are happy to offer you the commissioning of the machine.

Poglej podrobnosti

Oglašujte tukaj