Delovna platforma

GENIE GS 3246, Scherenarbeitsbühne Genie 11,9 m

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard Iodpfoqt Dmyjx Af Tstb - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Leto izdelave: 2018, Stanje: rabljeno, Novo: Da Iedpfx Ajg Uqp Isf Tjtb Namen uporabe: Gradbeništvo Za več informacij se obrnite na prodajo pri KEY-TEC.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. Itedped Ixadjfx Af Tjb A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling Itedpfju D Amgsx Af Teb - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: zelo dobro (rabljeno), Offered is a used solids pump / dirty water pump. SDAG Wismut-Aue. For further details, please refer to the photos. Ijdohwnfcjpfx Af Tjtb

Stanje: novo, Leto izdelave: 2024, Stroj za profiliranje kovinskih stebrov za vinograde se uporablja v vinogradih in sadovnjakih za proizvodnjo kolov in stebrov. Običajno so vinogradniški stebri debeline 1,5-2 mm. Proizvodna linija je sestavljena iz razvijalca (decoiler), servo podajalca-ravnalca, stiskalnice, orodja za vtiskovanje, stroja za profiliranje in giljotine. Iedpfxot Tcz Uo Af Tetb

Stanje: novo, Leto izdelave: 2025, Genie GS3246 E-Drive electric scissor lift, new and used – demonstration units available Iodpfxorqfnfs Af Tjtb

Stanje: novo, Leto izdelave: 2025, -Namenske Stroje Prilagojene Vašim Proizvodnim Potrebam -Naši namenski stroji so skrbno zasnovani in inženirsko dovršeni, da zadostijo edinstvenim zahtevam vaših proizvodnih procesov. Ne glede na to, ali potrebujete stroj za obdelavo površin, odstranjevanje oksida ali posnetje robov, so naši stroji sinonim za izjemno natančnost in zmogljivost. -Obdelava Površin: Zagotovite gladko in kakovostno obdelano površino na različnih materialih ter dosegajte dosledno profesionalen in sijoč videz končnega izdelka. Iedpfxjhq Dbxo Af Tjtb -Odstranjevanje Oksida: Učinkovito popolnoma odstranite oksidne plasti za čisto in neonesnaženo površino – ključno za nadaljnje postopke ali nanašanje zaščitnih premazov. -Posnetje (Zaokroževanje) Robov: Natančno zaokrožite robove na želeni radij, s čimer izboljšate varnost in celotno kakovost vaših izdelkov. Možnosti Prilagoditve Vsak stroj je individualno prilagojen vašim zahtevam in omogoča fleksibilnost pri: Hitrostih Procesiranja: Nastavljive hitrosti za prilagoditev različnim potrebam vašega proizvodnega procesa. Posebnih Funkcijah: Možnosti vključujejo sisteme za odsesavanje prahu in hlapov, nastavljivo pritiskanje ter programabilne konfiguracije za optimizacijo delovnega toka. Izdelano za Dolgotrajnost. Naši namenski stroji so robustno grajeni za dolgo življenjsko dobo in zanesljivo delovanje tudi pri daljših proizvodnih ciklih. Primerni so za manjše serije ali industrijske proizvodnje velikih količin in zagotavljajo vrhunske rezultate leto za letom.

Stanje: kot nova (razstavni stroj), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilting angle: 0 to 120° Itedpfx Afedvn E Uo Tsb Total height adjustment: approx. 700 mm Height adjustment with vertical table, up to center: 960 mm ~ 1,910 mm Dimensions with horizontal table: 1,200 mm to 1,900 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 2.980 h, nosilnost: 3.000 kg, dvižna višina: 5.625 mm, prosto dvigovanje: 1.890 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.645 mm, dolžina vilic: 1.200 mm, lastna masa: 5.500 kg, skupna dolžina: 2.500 mm, vrsta pogona: Elektro, gradbena širina: 1.400 mm, Electric 4-wheel forklift Load centre: 600 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Non-marking Front tyre size: 315/45-12 Ijdpfxeurz Scj Af Tstb Front tyre condition: 80 - 100% Rear tyres type: Non-marking Rear tyre size: 180/70-8 Rear tyre condition: 80 - 100% Battery voltage: 80V Battery capacity: 775Ah Battery type: PzS Battery year of manufacture: 2017 Battery condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, overhead guard, full free lift, joystick,