Termoformiranje

Geiss U8

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Gisdpfxswuddvj Afqjl Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Leto izdelave: 2016, Stanje: delavnici obnovljeno (rabljeno), v prenovi, dobavni rok konec januarja 2026, garancija 12 mesecev - Najvišja temperatura 200°C; temperatura se lahko na zahtevo poveča na 250°C - Notranje mere Š 1000 x G 1000 x V 1500 mm - Zunanje mere Š 1765 x G 1425 x V 2300 mm - s kontrolerjem Jumo Dicon Touch - Vodila za vhod, za polnjenje peči - Grelna moč 36 kW Gjdovk Navjpfx Afqjil - Lastna teža: 780 kg - Odvodna odprtina; odvodni ventilator in električna loputa se lahko naknadno vgradita na zahtevo. - Voziček za polnjenje na zahtevo (slika) - Dokumentacija, CE izjavo Namestitev in zagon z veseljem ponudimo tudi mi. Ogled v naši skladiščni hali po dogovoru. Peč, peči, sušilna peč, žgalna peč, toplotna peč, toplotna omara, industrijska peč, žarilna peč, segrevalna peč, temperirna peč, sušilna omara, komorna peč, peč za žganje, obtokovna sušilna omara, obtokovna peč.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Gjdpfx Ajvupm Dsfqeil Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 300 mm Turning length 600 mm Gsdoxn Amtopfx Afqsil Control FANUC, 18i-TB Swing diameter over cross slide 230 mm Travel X1 165 mm Travel Z1 700 mm Travel X2 190 mm Travel Z2 720 mm Travel Y +/- 50 mm Main spindle bore 76 mm Main spindle speed 5,000 rpm Main spindle motor 22 kW Spindle torque 208 Nm Counter spindle bore 76 mm Counter spindle speed 5,000 rpm Counter spindle motor 22 kW Spindle torque 208 Nm Tool turret 2 x 12 stations Number of live tool stations 2 x 12 Live tooling speed 5,000 rpm Torque 47 Nm Tool drive power 5.5 kW C-axis resolution 0.001° Rapid traverse X + Z axes 20 / 40 m/min Rapid traverse Y axis 7.5 m/min Total connected load 68.4 kVA Machine weight approx. 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA BB208, 210 mm diameter, on counter spindle, various tool holders for turret, short bar loader by HYDRAFEED, model MULTIFEED MX-1B for bar diameter 3 - 80 mm and bar lengths up to 1650 mm; chip conveyor, coolant system with band filter unit

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Fisher+Rueckle FZR-24 križni lepilni stroj za furnir, letnik 2013, na prodaj! Dolžina furnirskih trakov: 400–1100 mm (dva pasova) / 350–2100 mm (en pas) Širina furnirskih trakov: 50–500 mm Debelina furnirskih trakov: 0,3–1,5 mm Največja nazivna zmogljivost / cikel stroja: 30 ciklov/min Povprečna proizvodna hitrost: 17–20 ciklov/min Godpfeumrf Ajx Afqsil Efektivna dolžina ogrevalne cone: 2478 mm Priključna moč: 22 kW Stisnjen zrak: 6 bar Vrste lepila: na osnovi PVAc ali UREA

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), A large-format vacuum thermoforming machine by Geiss is available. Sheet cutting dimensions (min.): 1100mm/1300mm, (max.): 2100mm/1800mm, maximum forming depth: 620mm. Additional sheet format 1: min. 850mm/750mm, max. 1850mm/1250mm. Additional sheet format 2: min. 1050mm/800mm, max. 2050mm/1300mm. Included is a separate feeding unit with pneumatic sheet separation equipment, an automatic alignment device for sheet blanks in both longitudinal and transverse direction, a pneumatic pusher for removing formed parts from the feeding unit, fully automatic central lubrication for the feeding machine, several exchange pallets for window sheet sets, a storage rack for window sheets, a vacuum control system with four independently adjustable flow stages, and an air treatment system. Documentation is available. On-site inspection is possible. Gisdowih Arspfx Afqjl

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 8.900 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P4 3125, Panelni upogibalni stroj Salvagnini P4 3125 Godpfsxup Tmox Afqeil

Stanje: rabljeno, Profiling machine by Weinig, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Gedpfxek N I I Nj Afqjil

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Gjdpfx Aswf Ea Tjfqoil Draw depth: 700 mm If you would like further details or a quotation, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Gjdpfxev Nhx Us Afqeil Year of manufacture: 2001 CE certificate