Stroj za površinsko brušenje

Geibel & Hotz FS 40 Primus

Stanje: dober (rabljeno), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping area 400 x 200 mm Rsdpfjunw Iljx Abhsn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Rodpfjw Ucyujx Abhsn Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Leto izdelave: 1960, Stanje: rabljeno, Surface grinding machine with 250 x 135 mm magnetic chuck 400 Volt, power: 1.8 kW Redpfxoiuz Tge Abhjn

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm Rodow Dvkaepfx Abhon - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Rjdpet Hwziofx Abhon Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2006, Offer, subject to prior sale: 1 used vertical machining center Make: Hurco Model: VM1 Serial number: H-V12319 Year of manufacture: 200 Control: ULTIMAX 4 Table size: 762 x 356 mm Rodpfjwl H Rmsx Abhsn X travel: 660 mm Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 – 10,000 rpm Tool changer: 20 stations Taper: SK40 Rapid traverse (X/Y/Z): 28 m/min Drive power: 11 kW Space requirements (LxWxH): 2000 x 1800 x 2600 mm Weight: approx. 2,900 kg

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Rsdpowudhuefx Abhjn Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: rabljeno, Leto izdelave: 2006, 2006 Hurco VM1 Vertikalni obdelovalni center Leto izdelave: 2006 Tehnične specifikacije – Hurco VM1 VMC Splošni podatki Širina: 1800 mm Globina: 1900 mm Višina: 2600 mm Teža stroja: 2700 kg Glavni pogon Število vreten: 1 Območje vrtljajev vretena: 40–8000 min⁻¹ Moč motorja vretena: 11 kW Pomiki Premik X-osi: 660 mm Delovni pomik X-osi: 8 m/min Hitri pomik X-osi: 20 m/min Točnost X-osi: 0,005 mm Premik Y-osi: 350 mm Delovni pomik Y-osi: 8 m/min Hitri pomik Y-osi: 20 m/min Točnost Y-osi: 0,005 mm Premik Z-osi: 450 mm Rodpfjv Suwisx Abhen Delovni pomik Z-osi: 8 m/min Hitri pomik Z-osi: 20 m/min Točnost Z-osi: 0,005 mm Obdelovanec Maksimalna teža obdelovanca: 350 kg Delovna miza Zunanja dolžina: 762 mm Zunanja širina: 356 mm Dostava in postavitev na lokaciji sta na voljo za doplačilo – prosimo, povprašajte za ceno.

Stanje: rabljeno, X-os: 30,0 in / 762 mm Y-os: 16,0 in / 406 mm Z-os: 16,0 in / 406 mm Rsdpoiypzdsfx Abhon Pripravljen za pregled Pripravljen za dostavo

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.900 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Rjdpjwzyr Ajfx Abhjn Water bath Operating hours 5900 h Travel paths X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year of manufacture 2008