Rezalni mlini

GEBR. JEHMLICH Rekord BT

Stanje: zelo dobro (rabljeno),

Stanje: novo, Load capacity 15,000 kg Dkodequx S Iepfx Aplol Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight: approx. 2.9 t Required space: approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer featuring: - Double stub-axle steering - Small turning radius - Tip-over protection due to steering angle limiter - Robust design, low maintenance requirements - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard finish changes. On request, available in your RAL colour. Looking for different load capacities or dimensions? Please contact us.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pneumatic Pressure Clamp ensuring precise adherence of the workpiece to the table of the panel saw. This results in enhanced precision and cutting quality, facilitating and accelerating the panel sizing process. The clamp is very simple to install and operate. Application of a woodworking pneumatic pressure clamp for a panel saw: Lack of proper pressure securing the panel to the panel saw table is an issue that brings several potential consequences, significantly affecting the efficiency and quality of the cutting process. These problems include: Dedpjvxtcqjfx Aplskl Uncontrolled chipping: Without a solid pressure clamp, the panel may not be stably fixed on the table. In such cases, cutting can result in uncontrolled chipping, posing hazards to operators and potentially damaging tools and workpieces, thereby increasing production costs. Excessive material waste: Insufficient pressure may cause the panel to shift during cutting, leading to material losses since the misplaced panel can be cut incorrectly, requiring additional trimming or even scrapping the entire piece. Edge fraying: An unstable clamp can cause vibrations and inaccurate cutting. This, in turn, leads to edge fraying, negatively affecting the appearance and functionality of the workpieces, especially for finishing materials. Benefits of using a dual-section, 3200 mm pneumatic pressure clamp for panel saws: The solution to these issues is the use of a pneumatic pressure clamp which ensures the material is firmly pressed against the table throughout the cutting process. The resulting benefits include: Increased cutting precision: The pneumatic clamp allows secure and even fixing of the material to the table, resulting in higher cutting accuracy and eliminating uncontrolled chipping and edge fraying. Improved cut quality: Thanks to stable holding, the cutting quality is significantly enhanced. Panels are cut evenly without damage, increasing their value and aesthetics. Faster and easier panel sizing: With secure clamping, operators can work more efficiently and safely, speeding up the entire sizing process and thus increasing production throughput. Simple installation and operation: The pneumatic clamp is straightforward to install and operate, requiring no complex procedures and providing easy control. 2-zone clamping: The pneumatic clamp features two zones, with each side (2 cylinders per side) of the saw table independently controlled. This offers greater flexibility and allows adaptation of the clamping force to different material types and production requirements. In summary, the pneumatic pressure clamp is a reliable solution that improves the quality, precision, and efficiency of panel cutting, leading to time and material savings while minimizing the risk of damage and accidents. Technical specifications: Clamping length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Stanje: dober (rabljeno), We have 2 cutting mills / granulators for sale (the price refers to granulator no. 2). The machines were used for cutting plastic but can also be used for other synthetic materials. Both are equipped with liquid cooling systems. Technical data (granulator no. 1): - Dimensions: 150 x 115 cm / Height: 210 cm - Rotor diameter: 36 cm - Rotor/blade width: 55 cm - Number of blades: 3 (Fixed blades positioned at an angle, which significantly reduces resistance during cutting and shredding, resulting in more efficient operation.) - Feed opening: 30 x 53 cm - Motor: 22 kW / 30 hp - Liquid cooling system Technical data (granulator no. 2): - Dimensions: 150 x 125 cm / Height: 180 cm - Rotor diameter: 25 cm - Rotor/blade width: 52 cm - Number of blades: 3 - Motor: 22 kW / 30 hp - Liquid cooling system Dkodpfx Apeuw Skhslsl Prices: Granulator no.1 – €7,200 Granulator no.2 – €5,900 Both units: €11,900 TAG: plastic mill, shredder, plastic recycling, plastic cutting machine, industrial mill, cutting blades, plastics granulator, industrial machine, cooled mill, recycling machine

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Cutting diameter: 320 mm Saw band length: 5,320 mm Saw band width: 32 mm Cutting capacity at 90 degrees, round: 320 mm Cutting capacity at 90 degrees, flat: 320 x 320 mm Control unit: Series P 9521 Dkodpfxeu Nii Sj Aplel Height above floor: 730 mm Band speed: 15 - 110 m/min Total power requirement: 4.9 kW Machine weight approx.: 2,200 kg Machine dimensions (LxWxH) approx.: 1.9 x 2.95 x 1.8 m Heavy-duty hydraulic fully automatic high-performance band saw in 2-column design Suitable for: Solid and profile material made of steel as well as cast iron, light metals, and non-ferrous metals Hydraulic material feed, hydraulic vise clamping, adjustable clamping pressure Length measurement via precision glass scale, length 400 mm Maximum programmable cut-off length: 9,999.9 mm Automatic multiple stroke Saw band cleaning brush + 1x spare chip removal brush included Chip conveyor Coolant system (tank capacity approx. 65 liters) Hydraulic unit mounted to the side of the machine A facing cut is possible, and the set values can then be transferred to automatic operation. Min. cut-off length: 8 mm for single cuts, 15 mm when using the bundle clamping device.

Stanje: rabljeno, Rabljeni paketni fluidni sušilnik proizvajalca Aeromatic, model MP1, izdelan iz kislinsko odpornega jekla. Kislinsko odporna komora s prašnimi filtri ima skupno prostornino približno 16 l, maksimalna prostornina polnitve pa približno 13,5 l. Komora je nameščena na tečajih in jo je mogoče odstraniti. Obratovalni tlak znaša 6 barov. Pogon: 3,3 kW, 3 faze, 50 Hz. Minimalna teža polnitve: 400 g, maksimalna: 6 kg. Dksdeygvmfjpfx Aplel

Stanje: dober (rabljeno), Shielded gas welding machine, arc welding unit, MIG/MAG welding system -Scope of delivery: without wire feed unit, with hose package, as shown in the pictures -Manufacturer: Ess, MIG-MAG 520 MW shielded gas welding machine without wire feeder -Type: 520-2MW -Max. welding power: 500 A -Water cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg Dkedpfx Ajlpi S Neplol

Stanje: rabljeno, Leto izdelave: 1989, Serijsko pretočna sušilnica s fluidiziranim slojem iz nerjavečega jekla s funkcijo pršeče granulacije. Dkjdex R An Sopfx Apljl Proizvajalec: Glatt Model: WSG-C200 Leto: 1989 Prejšnja uporaba: farmacija Kapaciteta posode za produkt: 700 litrov Kapaciteta produkta: 200 – 280 kg Filtracija zraka in grelna baterija Filtracija z vrečami Izmenjevalnik toplote: cevni Nadzor temperature: več senzorjev Pršenje: da Peristaltična črpalka Watson Marlow Pršilna šoba Okvir in stolp: nerjaveče jeklo 316 Električna omara Prodaja se z dvema posodama in zaščitnimi žepi Voziček za obračanje: na voljo Dokumentacija: na voljo v nemščini Rezervni deli Ventili na voljo Ventilator ni na voljo Generator/bojler za toplo vodo ni na voljo.

Stanje: rabljeno, - Material: Nerjaveče jeklo Dedpfx Apox Rz Nbolskl - Pnevmatska izvedba / ADF - EX - 2 stožčasti rezervoarja po 400L na vozičku (na sušilnik) model WSG120 / D.1200 / 900 X PF.500 - 1 obračalnik rezervoarjev, skupen za oba sušilnika - Krmilna omarica - Varnost preko 2 eksplozijskih membran, povezanih na jeklenko dušika