Varilni aparat z inertnim plinom 500 A

ESS 520-2MW

Stanje: dober (rabljeno), Protective gas welding machine, arc welding system, MIG/MAG welding system - Manufacturer: ESS, protective gas welding machine MIG-MAG 520-2 MW - Model: 520-2MW - Max. welding current: 500 A - Water-cooled - Wire feed unit: ESS DVK 17, 4-roller drive - Dimensions: 1160 x 500 x H1220 mm - Weight: 379 kg Lhedpfx Aheqvp Nkeush

Stanje: rabljeno, Leto izdelave: 1978, Détails techniques : Course X : 1200 mm Course Y : 500 mm Course Z : 650 mm Axe W : 90° droite/gauche Dimension de la table : 1600 x 500 mm Vitesses de rotation : 24 - 1600 / 12 paliers tr/min Fixation de l’outil : SK 50 Distance nez de broche à la table : min/max : 150/800 mm Distance centre de la broche à la colonne : min/max : 200/800 mm Surface de bridage : 1200 x 520 mm Puissance totale requise : env. 25 kW Poids de la machine env. : 5600 kg Dimensions de la machine (LxlxH) : 2,4 x 3,0 x 2,4 m Dimensions de l’armoire électrique (LxlxH) : 1,1 x 0,5 x 1,8 m Cette machine se trouve dans le département technique ! Merci de tenir compte de la disponibilité pour la livraison. Caractéristiques techniques supplémentaires : Lodpou Nc Rvsfx Ahuohh - Broche horizontale : vitesse de 25 à 1200 tr/min sur 12 paliers, cône SK50 - Commande via pupitre de commande - comprenant système de refroidissement - équipé d’un système de mesure de longueur Millvision i.D. *

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pneumatic Pressure Clamp ensuring precise adherence of the workpiece to the table of the panel saw. This results in enhanced precision and cutting quality, facilitating and accelerating the panel sizing process. The clamp is very simple to install and operate. Application of a woodworking pneumatic pressure clamp for a panel saw: Lack of proper pressure securing the panel to the panel saw table is an issue that brings several potential consequences, significantly affecting the efficiency and quality of the cutting process. These problems include: Uncontrolled chipping: Without a solid pressure clamp, the panel may not be stably fixed on the table. In such cases, cutting can result in uncontrolled chipping, posing hazards to operators and potentially damaging tools and workpieces, thereby increasing production costs. Excessive material waste: Insufficient pressure may cause the panel to shift during cutting, leading to material losses since the misplaced panel can be cut incorrectly, requiring additional trimming or even scrapping the entire piece. Edge fraying: An unstable clamp can cause vibrations and inaccurate cutting. This, in turn, leads to edge fraying, negatively affecting the appearance and functionality of the workpieces, especially for finishing materials. Benefits of using a dual-section, 3200 mm pneumatic pressure clamp for panel saws: The solution to these issues is the use of a pneumatic pressure clamp which ensures the material is firmly pressed against the table throughout the cutting process. The resulting benefits include: Increased cutting precision: The pneumatic clamp allows secure and even fixing of the material to the table, resulting in higher cutting accuracy and eliminating uncontrolled chipping and edge fraying. Improved cut quality: Thanks to stable holding, the cutting quality is significantly enhanced. Panels are cut evenly without damage, increasing their value and aesthetics. Faster and easier panel sizing: With secure clamping, operators can work more efficiently and safely, speeding up the entire sizing process and thus increasing production throughput. Simple installation and operation: The pneumatic clamp is straightforward to install and operate, requiring no complex procedures and providing easy control. 2-zone clamping: The pneumatic clamp features two zones, with each side (2 cylinders per side) of the saw table independently controlled. This offers greater flexibility and allows adaptation of the clamping force to different material types and production requirements. In summary, the pneumatic pressure clamp is a reliable solution that improves the quality, precision, and efficiency of panel cutting, leading to time and material savings while minimizing the risk of damage and accidents. Technical specifications: Clamping length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak Ledpfx Aovxtcqehujhh

Stanje: dober (rabljeno), High-performance spot welding machine in 3-phase DC configuration DALEX, type PMS 14-4 G3 Arm reach: 550 mm Rated power at 50% duty cycle: 240 kVA Secondary short-circuit current: 89.5 kA Secondary open-circuit voltage: 4.69 – 9.38 V Electrode force: 80–1200 daN with double-stroke cylinder and approach stroke Lhodpfxogqxg Aj Ahush Lower arm support Weight: 1,660 kg Mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous dual-circuit welding control 8036 S3 Machine is currently being overhauled

Stanje: rabljeno, Dalex-Werke Pms 10-2 Ljdpfxsg Rcpxo Ahuehh 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage: 380 V - 50 Hz Open-circuit voltage: 5.6 V Electrode force: 65–390 daN Machine weight: 341 kg

Stanje: rabljeno, Turning length: 500 mm Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Spindle bore: 36.0 mm Mounting: DIN 55022 size 5 Tailstock quill: 3 MT Quill travel: 90.0 mm Spindle speed: 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement: 3.3 kW Voltage: 380 V Machine weight approx. 620 kg Dimensions (LxWxH): 1420 x 700 x 1200 mm From a vocational school - very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-precision turned parts Equipment: - Robust lead and feed screw lathe - KLOPFER four-jaw chuck, Ø 140 mm - Collet chuck with a large set of collets - Chuck key - MULTIFIX toolpost type A, with 3x new inserts - Sliding tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for carriage and cross slide Lhjdpfx Ahjxaccxsush - Pole-changeable drive motor - Machine base with cabinet door (storage compartment) - Chip guard rear panel

Stanje: rabljeno, Leto izdelave: 1993, Technical details: Material: PUR foam Rotor diameter: 315 mm Compressed air: 6 bar The GRINDING PLANT with REKORD BR-ex grinding and disintegration machine (pressure-shock resistant up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Processing material data: - Pre-shredded PUR foam pieces max. 20 mm - Moisture content such that the ground material remains grindable - Throughput: approx. 130 kg/h Drives: Lhedpfx Aheu Nxdfeueh - 5 drives (all gear motors) including: roller feeder, mill drive (squirrel-cage motor), agitator, discharge screw, rotary valve