Rabljeni dekanterji

GEA Westfalia SD0815

Stanje: rabljeno, Leto izdelave: 1991, Flottweg Three-Phase Decanter, Z4D-3/441, last operated in a fruit juice facility. Bowl inner diameter: 420 mm Bowl inner length: 1245 mm Bowl wall thickness: 10 mm The medium to be separated is fed into the hollow central shaft of the decanter. Solids accumulate on the bowl wall due to centrifugal force. A cylindroconical scroll conveyor transports the solids ring to the discharge openings, where it is ejected into the solids housing. The two liquid phases separate according to their specific densities, forming two concentric liquid cylinders. The diameters of the liquid rings can be adjusted via peeling disc and overflow weir. One of the phases is discharged without pressure, while the other is discharged under pressure via the peeling disc. The moisture content of the solids and the purity of the liquids can be regulated by: - Variation of phase separation disc and peeling disc diameters - Decanter bowl speed - Scroll speed Gbedpfx Aboyr Iccjxet Machine (addition): 3-phase decanter Max. bowl speed: 4000 rpm Max. sediment density: 1 g/cm³ Max. ambient temperature: 100 °C Moment of inertia: 15.5 kgm² (empty bowl) Material: Housing made of stainless steel 1.4301 (AISI 304), bowl made of high-strength cast stainless steel 1.4463 Mounting / position: free-standing Basic design: horizontal decanter bowl in a steel frame, on a square tube base with spherical feet Equipment: base with rubber suspension, electric motor (Loher 180 M, 22 kW) Weight: 2250 kg

Stanje: rabljeno, Leto izdelave: 2007, System: Mobile sludge dewatering plant, Decanter / Mobile centrifuge Manufacturer: Hiller Model: Solid bowl decanter centrifuge Type: DP51 Machine No.: H3991 Year of manufacture: 2007 Max. permissible drum speed: 3,400 rpm Drum inner diameter: approx. 505 mm Drum material: ST52.0 Drum wall thickness: 13.0 mm Godpfovz Dnpex Abxjbt Other features: Steel swap body with reinforced floor Accessories: Feed pump for sludge inlet, polymer dosing pump, polymer solution pump Polymer station: 2-chamber system for liquid polymers with agitator, adjustable Twin-shaft paddle mixer: galvanized steel Total weight: approx. 4,200 kg Purchase and rental available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Naprava: dekanterska centrifuga kot mobilna popolna naprava za razvodnjavanje v kontejnerju Stanje: rabljeno / demo stroj s samo 500 delovnimi urami Tip: Flottweg Z3E-4/451 Letnik: 2018 Najv. hitrost bobna: 5250 obr/min Standardna oklep: 8° stožec Diferencial: 1,5–29 min-1 Gsdoy Avtfjpfx Abxobt Navor: 2750 Nm Sistem: "Vsestranski" Flottweg Z3E-4/451 je zmogljiv dvofazni dekanter, namenjen ločevanju trdnih snovi in tekočin. ROBUSTNA IZVEDBA za ločevanje različnih vrst mulja, kot so gnojevka, fermentacijski ostanki, mulji iz industrije, čistilnih naprav in druge.

Stanje: rabljeno, Unité : Tricanter, décanteur 3 phases, centrifugeuse triphasée Flottweg Z4D-4/441, occasion Année de fabrication : 1998 Diamètre de la cuve : env. 420 mm Vitesse max. de rotation : 3500 tr/min Densité du sédiment : 1,8 kg/dm³ Gbedpfx Abey Eyf Dsxst Application : Cette puissante centrifugeuse décanteuse triphasée Flottweg est spécialement conçue pour la séparation continue des solides et de deux liquides. Par rapport aux décanteurs standards, cette installation offre une capacité de traitement nettement accrue, notamment pour les médias complexes. Unité : Installation complète sur skid Équipement : décanteur triphasé Flottweg - : Unité d'entraînement électrique - : Système de pompage - : Tuyauteries & vannes - : Plateforme de maintenance - : Installation complète sur skid Domaines d'application typiques : Séparation huile/eau - : Industrie alimentaire (ex. huiles végétales) - : Industrie chimique - : Recyclage & technologie environnementale - : Traitement des émulsions et boues

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, 1 rabljeni parni kotel ----- - z valovito kuriščnim cevjo in izbočenimi dnom - Proizvajalec: STANDARD Greta površina pribl.: 240 m² Zmogljivost: 13,4 t/h Najv. obratovalni nadtlak: 14,0 bar Preizkusni nadtlak: 18,2 bar Vsebina vode pribl.: 18.160 l Gedpjxtndnofx Abxebt Leto izdelave: 1988 Opremljen z zemeljskim plinskim gorilnikom Saacke tip DG 80, plinsko regulacijsko lino, krmilno omaro, napajalno črpalko za vodni dovod in prisotnimi grobimi in finimi armaturami.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Alfa Laval centrifugal pump, Type LKH 85/240, 25.0 kW Stainless steel. Used! Good condition! Inlet: 6" – Outlet: 6" Gjdpfx Abehck S Eexobt

Stanje: rabljeno, System: Decanter Gjdpfx Aovz Rwksbxebt Model: Alfa Laval DSNX 4250 Year of manufacture: 1995 Speed: 2950 rpm Gear ratio: 2.71 Separation technology: Sludge dewatering by means of decanter centrifuges (solid bowl scroll centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to their different densities.

Stanje: rabljeno, številka stroja/vozila: 5063, System: Used Decanter / Centrifuge Manufacturer: KHD Model: Solid Bowl Screw Centrifuge Type: CP 3-0.1 Machine No.: 5063 Max. Permissible Speed: 2950 rpm Drum Inner Diameter: approx. 530 mm Drum Wall Thickness: 12.5 mm Drum Material: W 2 Gearbox: Integrated hydraulic gearbox Hydraulic Drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total Weight: 2400 kg Purchase and rental available. Gjdpfjddzm Tex Abxsbt

Stanje: dober (rabljeno), • Electronic 11-spindle straight line edging and polishing machine for flat edges and mitres, feed direction right to left • Edge angle adjustable from 0 to 45 degrees • Model: TL 11 AV • Serial number: 497-01 • Machine configuration: o 2 x 150 mm diamond wheels for edges o 2 x 150 mm polishing wheels o 2 x 150 mm polishing wheels Gbjdpferhilxsx Abxjt o 1 x cerium-impregnated wheel o 1 x 150 mm diamond wheel for rear arris o 1 x 150 mm polishing wheel for rear arris o 1 x 150 mm diamond wheel for front arris o 1 x 150 mm polishing wheel for front arris Special price: €6,500

Stanje: rabljeno, številka stroja/vozila: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimised for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletising. The configuration is non-combi and features a separate blow moulder upstream of the filling monoblock, ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottles Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow moulding and filling systems) Main components and years of manufacture: - Sidel Universal SBO 14 blow moulder (2007) - Sarcmi 70-10 ISO filling monoblock (1988 – fully overhauled 2025) - Sarcmi labeller (2011) - Zambelli shrink wrapper (2004) - Handle applicator (2004) - ACMI double-head palletiser (1992) Advanced Automation and Control Systems The line benefits from a modernised conveyor and control system, with conveyor management and electrical control cabinets upgraded in 2010–2011. This update improves module synchronisation, enhances safety interlocks, and ensures stable high-speed performance across blowing, filling monoblock, labelling, and packaging stages. - Upgraded conveyor control and electrical panels in 2010–2011 - Integrated safety interlocks for secure, high-throughput operation - Non-combi architecture simplifies maintenance and phased upgrades Line Integration Capabilities Designed as a complete production solution for water bottling, this used line offers seamless integration from blow moulding to end-of-line palletising. The non-combi layout allows independent operation and optimisation of the blow moulder and filling monoblock, making format changes and maintenance manageable without stopping the entire line. Inline flow: Blow moulder → Filling monoblock → Labelling → Shrink wrapping → Handle application → Palletising Conveyor system upgraded for reliable accumulation and product transfer Suitable for carbonated and still water in PET Gedpfx Aoyk E Srebxsbt Machine Condition and Maintenance History This used bottling line has benefited from targeted upgrades of the conveyor management and electrical control cabinets, completed in 2010–2011. A key highlight is the Sarcmi 70-10 ISO filling monoblock, originally built in 1988 but fully overhauled in 2025 to ensure maximum operational reliability. The line is sold in operational condition as a ready-to-use industrial packaging solution. - Sarcmi 70-10 ISO filling monoblock: Overhauled in 2025 - Conveyor and electrical control cabinets upgraded: 2010–2011 - Well-known OEM components throughout the line - Operational with existing 0.5L PET format