Taler ločilo

GEA Westfalia FSE 300-06-777

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/40°C, 118 kW at -10°C/40°C, 77 kW at -20°C/40°C Refrigerant: R404A Stock quantity: 3 units Stock number: S 75 Condition: Used, good Klsdpoh Dht Djfx Aqgjw We have a large selection of other refrigeration equipment available: condensing units, compressors, coolers, condensers, chillers, cold rooms, as well as refrigerated and catering furnishings, and machines and equipment for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker.

Stanje: zelo dobro (rabljeno), Ultrafiltrations-Pilotanlage APV Typ PCI-UF 50-100 Inklusive Pumpen, Wärmetauscher, Frequenzumrichter, Rohrleitungen und sonstigem Zubehör. Klsdpfxjihh Spj Aqgew Laboranlage

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Hot water tank / thermal storage tank made of V4A stainless steel, vertical design Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: storage tank Condition: used Food grade: yes Design: vertical Internal diameter: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: non-pressurized Wall thickness (shell/cylinder): approx. 5.3 - 7 mm Floor clearance: approx. 1,800 mm Operating temperature: -10°C / +90°C Material / properties Internal shell material: V4A (1.4571) Outer shell material: stainless steel Internal surface: 2B finish Internal weld seams ground smooth Ksdpfx Aqsqagl Hogslw Insulation Insulation present Insulation thickness: approx. 100 mm Insulation material: mineral wool Insulation jacket material: aluminum Insulation jacket: bolted/riveted Remarks: Cone roof cladding: stainless steel Cylinder cladding: aluminum trapezoidal sheet Cone cladding: smooth aluminum sheet Equipment Base type: support ring/stand collar Fixation: fixed Top section: conical base Bottom section: conical base Top: 1 x manway DN 200 with insulation cover 1 x flange DN 32 welded into manway (CIP) 1 x manway drainage DN 32 1 x empty cable conduit DN 50 1 x overflow DN 150 2 x lifting eyes Shell: 1 x inlet nozzle DN 100 1 x filling line DN 100 4 x thermometer sleeves (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x nameplate 1 x access door (approx. 2,000 x 1,000 mm) 1 x outlet nozzle DN 100 Bottom: 1 x pivoting cone DN 450, ending in smooth flange DN 100 Remarks: For remaining details, refer to images and drawings. Documentation Drawing

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, številka stroja/vozila: 7771, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 300 mm, obratovalna hitrost: 75 mm/s, hitrost vzvratne vožnje: 75 mm/s, višina mize: 900 mm, globina grla: 1.000 mm, skupna širina: 3.100 mm, skupna masa: 8.900 kg, potovalna razdalja osi X: 1.000 mm, model krmilnika: EC20 - graficzne 2D, delovna širina: 3.000 mm, upogibna sila (maks.): 100 t, zadnji prislon: 1.000 mm, hitrost zadnjega prislona os R: 250 mm/s, Razdalja pomika zadnjega prislona, os R: 200 mm, pomik zadnjega naslona os Z: 1.000 mm, razdalja med stojali: 3.000 mm, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, vrsta aktuacije: električni, Oprema: CE označba, evropski sistem vpenjanja orodij, nujno zaustavitev, varnostna svetlobna zapora, Servo-električna upogibna stiskalnica SAFANDARLEY tip E-Brake 100-3100 NS (100T - 3060 mm) Orodjni sistem AMADA Proizvajalec Nizozemska - Lochem Smo uradni zastopnik podjetja SafanDarley za Poljsko. - Servo-električni pogon - Tlak 100 T - Dolžina upogibanja 3060 mm - Hod 300 mm - CNC upravljanje po oseh Y1 / Y2 / X / R / Z1 / Z2 - Zadnji prislon krmiljen v 4 oseh CNC - X / R / Z1 / Z2 - Grafično 2D upravljanje – model EC20 - Programabilna svetlobna zavesa - Orodjni sistem AMADA Ksdpfx Aqjylt Ukogslw - Orodjni sistem WILA – spodnja sponka, možne matrice 4V / 2V / 1V / tip T z osnovo 60 mm - Kompenzacija spodnje mize – »CROWNING«

Stanje: rabljeno, Leto izdelave: 2007, System: Mobile sludge dewatering plant, Decanter / Mobile centrifuge Manufacturer: Hiller Model: Solid bowl decanter centrifuge Type: DP51 Machine No.: H3991 Year of manufacture: 2007 Max. permissible drum speed: 3,400 rpm Drum inner diameter: approx. 505 mm Drum material: ST52.0 Drum wall thickness: 13.0 mm Other features: Steel swap body with reinforced floor Accessories: Feed pump for sludge inlet, polymer dosing pump, polymer solution pump Polymer station: 2-chamber system for liquid polymers with agitator, adjustable Twin-shaft paddle mixer: galvanized steel Total weight: approx. 4,200 kg Kledpjvz Dnpofx Aqgjw Purchase and rental available.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Our horizontal form, fill and seal machine from the DEAPHS series is specifically designed for the filling of 3- and 4-side sealed sachets and Doypack pouches. Thanks to various dosing systems such as auger fillers, volumetric cup fillers, and multihead weighers, the machine reliably packages powdery, liquid, and granular products. The machine also independently manufactures the pouches to be filled directly from flat film, providing a cost-effective and efficient packaging solution. Thanks to the modular design of the form, fill, and seal machine, it can be easily and quickly converted or expanded. ✅ Perfectly suitable for food, pet food, pharmaceutical products, cosmetics, and other non-food items. ✅ Also ideal for filling small product quantities and samples – for example, in our mini pouches. ✅ Optional accessories such as volumetric cup filling systems, multihead combination weighers, piston fillers, and Hibar pump fillers available. ✅ Matching packaging material (pouches & film) also available from us. Independent film unwind shaft: Ensures excellent control of film tension; flexible adaptation to film roll width and pouch specifications possible; improved Doypack shaping. Configuration: - Film unwind shaft - Bottom pouch sealing - Pouch bottom forming - Three horizontal sealing units - Two vertical sealing units - Servo-driven pouch pull-off - Mechanical pouch cutting - Vacuum pouch opening - Photocell control - LCD touch display - PLC – Panasonic - Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Klsdpfx Aqoum R Ezjgew Connected load: 380V, 3-phase, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Stanje: rabljeno, Leto izdelave: 1991, Flottweg Three-Phase Decanter, Z4D-3/441, last operated in a fruit juice facility. Bowl inner diameter: 420 mm Bowl inner length: 1245 mm Bowl wall thickness: 10 mm The medium to be separated is fed into the hollow central shaft of the decanter. Solids accumulate on the bowl wall due to centrifugal force. A cylindroconical scroll conveyor transports the solids ring to the discharge openings, where it is ejected into the solids housing. The two liquid phases separate according to their specific densities, forming two concentric liquid cylinders. The diameters of the liquid rings can be adjusted via peeling disc and overflow weir. One of the phases is discharged without pressure, while the other is discharged under pressure via the peeling disc. Kodpjyr Iccjfx Aqgjlw The moisture content of the solids and the purity of the liquids can be regulated by: - Variation of phase separation disc and peeling disc diameters - Decanter bowl speed - Scroll speed Machine (addition): 3-phase decanter Max. bowl speed: 4000 rpm Max. sediment density: 1 g/cm³ Max. ambient temperature: 100 °C Moment of inertia: 15.5 kgm² (empty bowl) Material: Housing made of stainless steel 1.4301 (AISI 304), bowl made of high-strength cast stainless steel 1.4463 Mounting / position: free-standing Basic design: horizontal decanter bowl in a steel frame, on a square tube base with spherical feet Equipment: base with rubber suspension, electric motor (Loher 180 M, 22 kW) Weight: 2250 kg

Stanje: dober (rabljeno), MKT Ost-PrePress-Linie in gutem Zustand, Kapazität 12.000 L Klodpfxeh E Dpij Aqgjw Bitte kontaktieren Sie uns für weitere Informationen.

Leto izdelave: 2025, stanje: novo, Kreuzmayr fruit drying cabinet OTS 11, 11 m² drying surface, electrically heated, with temperature and humidity control, connected load 7.5 kW, full stainless steel construction, suitable for drying fruit, vegetables, meat, etc. Kljdpfxob Ipxwe Aqgjw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, moč vretenovega motorja: 12.000 W, največja hitrost vretena: 24.000 obr/min, This FORMAT4 Profit H200 13.33 4-axis machining center was manufactured in 2019. It features a CNC gantry machining center with a working area of 4000 mm on the X-axis and 1670 mm on the Y-axis. The machine is equipped with a 12 kW electrospindle and a tool magazine with 12 positions. If you are looking for a high-quality woodworking machine, you should consider the FORMAT4 Profit H200 13.33 we have for sale. Contact us for further details. • Working Area (maximum panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle: • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool Magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling Unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm Kedpfx Aqeyi U Elogjlw • Max. tool diameter: 10 mm • Grooving saw units: 2 (X and Y) • Max. saw blade diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum Table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cup height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis System • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guides on all axes • Automatic central lubrication • Control and Software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote maintenance package (internet-enabled)