Stroj za vrtanje s trakom

Ganomat Korpusprese Concept Eco

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Iaedpfx Adju R Szaoksp Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Leto izdelave: 2024, stanje: novo, Return System Year of Manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edge banding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable and synchronizes with the edge banding machine. The RTS Compact comes complete with a control cabinet and is immediately ready for operation once installed. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Optional: "RTS Compact Ergonomics Package" available. Includes a lift table and an air cushion table at the end of the return conveyor, enabling ergonomic operation. - Compatible with edge banding machines from all manufacturers Isdpfx Adsw Nadmoksap - Single-operator control of the edge banding machine possible - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 days - Rotating device for small parts - Comes with conveyor: length 4500 mm, width 800 mm Single-track roller rail RTS Compact control option: control box Availability: short notice Location: Flörsheim

Leto izdelave: 2017, stanje: rabljeno, Used Machine Year of Manufacture: 2017 The TSRET04 return system from manufacturer Barbaric is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and fulfills the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed area of the edge banding machine Functionality: After passing through the edge banding machine, the workpiece is placed on a roller table. Transfer is achieved by means of belt conveyors running perpendicular to the transport direction, which emerge from the roller table, lift the workpiece, transport it sideways, and set it down onto a slightly lower roller table. This roller table conveys the workpiece onto a belt conveyor. At the end of the belt conveyor, there is a gravity roller track, slightly inclined toward the infeed of the edge banding machine. A stop at the end of the roller track halts the workpiece. Technical Data: Maximum load capacity: 60 kg Maximum panel size: 2,800 x 1,300 mm Cycle time: max. 11 pieces/min Dimensions: Return: 2293 x 1961 mm Conveyor belt: L 2500 x W 800 mm Roller track: L 2000 x W 800 mm Total length: approx. 6943 mm Ijdpfxox Rpgbe Adksap Total width: approx. 2239 mm Availability: short-term Location: Flörsheim

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate Iajdpfx Adow Nafkokop