Večnamenska žaga

gabbiani GABBIANI SA350 300

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Einwellenzerkleinerer von Weima Ndedjivpttopfx Al Deb Modell: WL6S Hauptantrieb: 22 kW

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER Edge Banding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program changeover and tool adjustment via the 18.5” 16:9 color touchscreen display. Short glue system heat-up time with the GlueJet (GJ 301 automatic): approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR adhesive and cleaning the system is effortless and can be done within minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective foils, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, ideal for workshops processing a wide variety of edge types. The DIA tooling features multi-stage design, allowing switching between radii and chamfers as needed – from longitudinal milling to corner copying and profile scraping. Ndsdpfx Asyfgrpjl Djb The extendable workpiece support and extended feed-in section with air cushion table make handling large workpieces easier. A guidance system assists with feeding small workpieces into the machine. Edge thickness for coil material: 0.4 – 3 mm (material-dependent) Edge thickness for strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet for both EVA and PUR quality adhesives, with minimal effort. Compatible with all standard edge types, including high-gloss, supermatt, and solid wood edges up to 15 mm. Motorized adjustment of the infeed guide fence Narrow-part guidance system Prepared for connection to a RETURN system Motor-driven pressure bridge with upper belt drive Multifunction units for quick setup of radius, flush, and chamfer operations Vertical & horizontal spray systems And much more. Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Stanje: rabljeno, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Machine length: Ndedpfx Asiixxnsl Dob Machine width: Weight: 110 kg

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Nedpfody Hm Dox Al Dodb Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: dober (rabljeno), various supporting blocks and roller stands, 5-position adjustable for transverse and longitudinal rotation for relieving, e.g., welding positioners or for transporting pipes various versions available height adjustment in steps or stepless various heights Ndedpol Dwnlofx Al Dsb The stands themselves have a load capacity of up to 8 tons Prices from €480 to €850

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 10.000 l, Diesel refueling station – On-site refueling station – Commercial refueling installation – consisting of: 1 x storage tank, 10,000 liters capacity, used 1 x fuel dispenser, model Eco 75, brand new Storage tank description: According to DIN 6616-D, above-ground, double-walled, including test certificate. The tank is supplied with two saddle feet, a manhole with dome cover, is used, internally emptied and professionally cleaned, equipped with the following fittings: - 1 fill pipe with TW cap (filler cap) and dip pipe - 1 gauge pipe with dipstick and dipstick closure - 1 vent pipe with ventilation hood - 1 brand new overfill prevention sensor with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection liquid The tank will be newly primer-coated and painted externally (RAL color tone). L = approx. 5.30 m - D = 1.60 m - Weight approx. 2.4 t - ex works, loaded free of charge Fuel dispenser description: Model Eco 75 – not suitable for calibration (non-legal-for-trade), Delivery rate up to approx. 75 l/min, suitable for diesel fuel, including: - Fuel management terminal with connection to myTecalemit Cloud - Incl. web-based tank data management software – Basic module - 2 ID systems for driver/vehicle, max. 4,000 users - Identification via transponder technology - USB interface for data retrieval Ndodpji An Ufjfx Al Dob - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine-mesh strainer - 4 m hose DN 25 with type-approved automatic nozzle, including swivel joint and nozzle holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Memory for up to 10,000 fueling transactions - Menu guidance in German, English, and French Magnetic keys / transponders are additionally required. General: You will receive an invoice with VAT shown separately. Purchase subject to our General Terms and Conditions. Other tank systems (new and used) as well as rental systems are also available! Additionally, we purchase existing tank systems and can, with certified specialist qualification according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Krojna žaga Graule ZS 170, leto izdelave 1996, 1600 EUR Rezalnik Graule 6/250 - 160, leto izdelave 2008 2550 EUR Rotacijski podajalnik za krila in okvirje Nodpfx Aowp Stzsl Dodb 500 EUR Valjasta tirnica dolžine 7,5 m, uporabljena kot podajalnik za okna pred postajo za vstavljanje stekla 600 EUR

Stanje: rabljeno, Costa Vielblattsäge Njdpjvw Rplefx Al Dedb - Modell: Lince - Maximale Schnitthöhe: 140 mm - Motorleistung: 30 kW

Stanje: rabljeno, Technical data: Track width: 400 mm Max cutting height: 150 mm Max saw blade diameter: 450 mm Min workpiece length: 700 mm Stepless feed adjustment Automatic lubrication system Kickback protection Extraction port: 300 mm Emergency stop switch Power supply: 380 V Main motor power: 55 kW Overall dimensions: Ndjdpfx Ajh Tkbkel Deb Length: 2000 mm Width: 2120 mm Height: 1860 mm

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and Technical Specifications: - Machine fully overhauled: - new Glue Jet 301 glue system (upper part 1 mm) - all units checked - all cutters sharpened - all knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical supply for variable feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 controller with 15" touchscreen - ECO MODE energy-saving function - Infeed fence 1350 mm, motorized adjustment - Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic Nedpezlbpzefx Al Djdb - Glue application station Glu Jet GJ301 automatic: - 2.3 kW, 50 Hz - Granulate storage hopper - Pressure section 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM-technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM-technology - Scraper unit 1929 MOT2: - HW reversible carbide inserts for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach