Roboti - Varjenje

FRONIUS WF 25i R

Stanje: dober (rabljeno), 1 used MIG/MAG welding machine Brand: Lorch Model: Micor Mig 400 with separate wire feed unit Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires - Steel [Ø in mm]: 0.6 - 1.6 Weldable wires - Stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires - Aluminium [Ø in mm]: 1 - 1.6 Weldable wires - CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Stepless MIG/MAG Duty Cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode Welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode Duty Cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 General Data Open-circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Power supply fuse 3~ (50/60 Hz) [A]: 32 Positive power tolerance 3~ (50/60 Hz) [%]: 15 Negative power tolerance 3~ (50/60 Hz) [%]: 15 Dsdpfx Abey Ia Hmegoci Mains plug: CEE 32 Standards and Approvals Protection class: IP32S Insulation class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Rated cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (LxWxH) [mm]: 880 × 490 × 885 Dimensions – wire feed unit (LxWxH) [mm]: 575 × 245 × 434 Weight [kg]: 61

Stanje: novo, Leto izdelave: 2024, Drilling capacity in steel (diameter): 35 mm Throat depth: 320 mm Drilling stroke: 150 mm Spindle taper: MT 4 Table size: 500 x 400 mm Spindle speeds: 75 – 3,010 rpm Dedpfx Aowlvlajbgoci Quill feed range: 0.1 / 0.15 / 0.22 / 0.33 mm/rev Quill travel: 150 mm Operating voltage: 400 V Total power requirement: 1.8 kW Machine weight: approx. 275 kg Space requirement: approx. 0.70 x 1.00 x 1.95 m - Factory No.: 138050673 - Electromagnetic feed - Tapping device - Machine vice, 150 mm - Two T-slot bolts, 14 mm - 9-piece drill bit set 14.5 mm – 30 mm, MT2 / MT3 - Cutting oil spray

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Brother Hi-Spin Riveting Machine 5mm High Spin Model: BR1-103 - Riveting capacity (soft steel rivets): φ5 mm or smaller - Spindle head: 20–40 mm Dcodpowdwv Rofx Abgji - Distance between worktable and punch: 60–180 mm - Worktable size: 310 x 180 mm - Adjustable processing time: 0.3–5 seconds - Normal pressure: (varies depending on pressing conditions) 2–5 kg/cm² - Air consumption: - Power supply and motor: Three-phase 200 V, 0.2 kW, 4-pole - Machine dimensions: Width 390 x Depth 510 x Height 1000 mm - Machine weight: 95 kg

Stanje: rabljeno, Leto izdelave: 2008, Vrtalna zmogljivost v jeklu (premer): 32 mm Izvitje: 232 mm Vrtalni hod: 150 mm Hitrost vretena: 115 - 2470 min⁻¹ Vpenjanje: MK 3 Dedpfoyv N Dqex Abgoci Teža stroja pribl. 280 kg Prostorske zahteve pribl. 500 x 950 x 1800 mm Dodatki/Oprema: - Naprava za rezanje navojev - Naprava za hlajenje

Stanje: dober (rabljeno), Zaščitnogasni varilni stroj, obločnovarilna naprava, MIG/MAG varilna naprava, pulzna varilna naprava -Proizvajalec: Esab, zaščitnogasni varilni stroj PULS -Tip: LUD320W -Maksimalna varilna moč: 320 A Dedpfxsy Ulrno Abgsci -Oprema: vodno hlajenje, daljinski upravljalnik -Potisni kovček za žico: Esab MEK 44 C s 4-kolesnim pogonom -Mere: 1130/640/H1630 mm -Teža: 174 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Cutting diameter 305 mm Cutting range at 90 degrees: flat 350 x 200 mm Cutting range at 45 degrees: round 250 mm Cutting range at 45 degrees: flat 230 x 200 mm Cutting range at 60 degrees: round 175 mm Cutting range at 60 degrees: flat 170 x 100 mm Cutting speed 18 - 110 m/min Vice max. 350 mm Saw blade dimensions 3370 x 27 x 0.9 mm Motor power 1.5 / 1.8 kW Machine weight approx. 880 kg Dimensions L-W-H 1700 x 2200 x 2000 mm Equipment: - sturdy, electro-hydraulic fully automatic band saw - user-friendly controls - miter cuts to the left up to 45° . possible in automatic operation - miter cuts up to 60° . possible only in semi-automatic operation - hydraulic unit with automatic pressure shut-off in idle mode - stationary base frame with large chip drawer and automatic coolant system - stepless saw band speed adjustment (ESC) - rotating chip brush - minimum remnant piece 80 mm - operating manual (PDF) Dodpfx Abeyy A Hysgeci

Stanje: rabljeno, Leto izdelave: 2011, Tehnični podatki: Zmogljivost vrtanja v jeklu (premer): 35 mm Dedpfsyli Sfox Abgeci Iztek: 350 mm Hod vrtanja: 180 mm Rezanje navojev: ST M 24 mm Vreteno MK: MK4 Hitrost vrtenja vretena: 50 - 1450 obr/min Največja razdalja vreteno/miza: 780 mm Vpenjalna površina mize: 560 x 560 mm Teža stroja pribl.: 500 kg Pribl. dimenzije stroja (DxŠxV): 0,73 x 0,56 x 0,22 m

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 9.000 h, 0991C C461R MaxiCut HC 13 Premium / Balirka za okrogle bale / 1083 Zadnja talna vodilna kolesa / 3043 Pnevmatike 620/40R22,5 / 5012 Vlečna naprava s kroglo (tip K80) / 7000 Zavorni sistem na stisnjen zrak za tandem os / 7701 Dostava Dodpfeyu T Hfox Abgjci

Stanje: novo, Leto izdelave: 2025, Premer reza 280 mm Dolžina žaginega traku 3660 x 27 mm Dedpfeyk Ii Hox Abgeci Širina reza 0,9 mm Rezalno območje pri 90 stopinjah: kvadrat 270 x 270 mm Rezalno območje pri 90 stopinjah: ploščato 210 x 330 mm Skupna potrebna moč 1,5 kW Teža stroja cca 1200 kg Prostorske zahteve cca 1350 x 2250 x 1860 mm GERD WOLFF KMS 280 je precizna tračna žaga s servopogonom, zasnovana za konstantno natančno rezanje.

Stanje: novo, Condition: new Delivery time: approx. 8 weeks from order Country of origin: Spain Price: €10,930 Lease rate: €209.86 Drilling capacity in structural steel: 35 mm Spindle taper: MT 4 Throat depth: 300 mm Speeds: 132-194-277-319-466-666-8 rpm Motor: 1.5 kW Tapping capacity: M27 Length: 755 mm Width: 480 mm Height: 2,205 mm Weight: 385 kg Column diameter: 125 mm Distance spindle - table: 90 - 890 mm Distance spindle - base: 1,250 mm Table: 400 x 420 mm Quill stroke: 150 mm Manual feed Gearbox drive Hardened and precision-ground high-quality gears Speed chart and control levers on the front Dcedowiqpnopfx Abgsi Depth scale and adjustable depth stop Thermomagnetic circuit breaker Emergency stop button Forward/reverse switch Work lamp Height-adjustable table Drill chuck guard with microswitch Complies with CE regulations OPTIONS (PRICES ON REQUEST): - Electronic speed variator incl. digital display (VE+TAK) A) 66–211 B) 97–310 C) 138–443 D) 160–510 E) 233–746 F) 333–1,066 G) 440–1,413 H) 648–2,074 I) 926–2,963 - Digital depth display (LBC) - Tapping device (IR/RS) - Tapping device for models with electronic speed variator (IR/RS-VE) - Swiveling and tiltable table (MGI) - Coolant system with T-slots in the machine base (ERB) VERSION ERLO BX-35 WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST