Varilna enota

FRONIUS TPS 4000 (3184)

Stanje: novo, Grinding range: 2 - 20 mm Point angle min./max.: 90 - 135 degrees Connected load: 230 V Machine weight: approx. 8.6 kg Space requirement: approx. 0.35 x 0.2 x 0.2 m Packaging dimensions: 340 x 270 x 410 mm Weight: 8.6 kg Dedpfxeupxkwj Afqscr

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0523813, Offer 22728 Technical Data: - Welding current: max 335 A at 35% duty cycle max 260 A at 60% duty cycle max 200 A at 100% duty cycle - Welding current adjustable in 36 fine steps from 40 A to 335 A - 2-roll wire feed Dcsdporm Rpvjfx Afqor - Infinitely variable wire feed speed - 2-stroke / 4-stroke selector - Spot welding and interval welding functions - Air-cooled torch package, length: 4 metres - Ground cable - Pressure regulator - Power supply: 400 V - Dimensions (approx.): W 550 x H 1000 x D 1000 mm - Weight (approx.): 150 kg

Stanje: rabljeno, Leto izdelave: 1975, Drilling capacity in steel (diameter): 35.0 mm Drilling capacity in cast iron: 40.0 mm Throat depth: 300 mm Quill stroke: 180 mm Speed range: 65 – 1,750 rpm Dcjdpfxsxabuas Afqer Table size: 425 x 500 mm Column diameter: 155 mm Feed rate: 0.1 / 0.2 / 0.3 m/min Spindle taper: MK 4 Motor power: 0.9 / 1.5 kW Weight: 450 kg Dimensions (L x W x H): 800 x 650 x 1,850 mm Machine from a vocational school In good / well-maintained condition (!!) Features: - Robust motorised column drilling machine with VARIO drive (V-belt) - Electro-automatic spindle feed - Two-speed switchable motor - Infinitely variable speed control (VARIO drive) - Adjustable drilling depth stop - Machine table with 2x T-slots * height-adjustable via hand wheel - 1x used machine vice - Machined base plate - Coolant system - Connection cable + plug - Machine damping feet - Original operating manual

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0518018, Offer 24600 Technical Specifications: - Suitable for welding steel, aluminium, special metals, CrNi, etc. - Welding current: 450 A 60% duty cycle - 360 A 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Interconnecting cable set device – wire feed case 14 m - 4-roll wire feed, steplessly adjustable - MIG/MAG welding torch package, water-cooled, approx. 4 m - Earth cable - Pressure reducer Dcsdpfx Afovncfmjqer - Mobile undercarriage - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 15470, Offer 25095 Technical Data: Dcsdpewd Ii Uefx Afqsr - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Spindle taper: Morse taper 4 - Spindle stroke: 180 mm - Infinitely variable spindle speeds with gear change: - Range 1: 50 – 175 rpm - Range 2: 175 – 640 rpm - Throat (distance spindle to column): 330 mm - 3 automatic feeds: 0.1 – 0.2 – 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable by rack and hand crank - Max. distance table – spindle approx. 780 mm - Max. distance machined base plate – spindle approx. 1250 mm - Coolant system - Work light - Drive motor: 400 V / 4 kW - Footprint approx.: W 720 x H 2050 x D 1150 mm - Weight approx.: 500 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ALZMETALL AX 4 / SV Column Drilling Machine 3KW Manufacturer: Alzmetall Model: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity in steel E335 (St 60): 55 mm Tapping capacity: Steel E335 (St 60): M42 Cast iron EN-GJL-200: M56 Short spindle MK 4 Spindle stroke: 140 mm Usable throat: 300 mm Column diameter: 145 mm Machine table, usable surface: 615 x 430 mm Distance spindle-table min./max.: 150/735 mm T-slots: number x width x spacing: 2 x 14 x 224 mm Feed: 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Stepless drive Dcsdpexd Ttpofx Afqsr Motor: 1500 rpm Power: 3.0 kW Spindle speed rpm: 70-2400 Standard equipment: - Main switch with motor protection switch, lockable - Mushroom emergency-stop button (latching) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection rating IP54 - Spindle guard with electric interlock - Finish: DD textured paint, signal white RAL 9003, PANTONE 7545c, black - Machine oil: initial fill; loose container supplied Available options: - LED machine lamp - Tapping unit with soft start (from 2025) - Coolant system in the base - Digital drilling depth indicator - Fine drilling depth adjustment 0.1 mm

Stanje: rabljeno, Leto izdelave: 1965, Drilling capacity in steel (diameter): 40 mm Total power requirement: 4 kW O F F E R We can offer you, without obligation, ex stock, subject to prior sale and error: A L Z M E T A L L Heavy Duty Column Drilling Machine Model: AB 4 / SV Year of manufacture: approx. 1965 Serial number: 10024 Drilling capacity in steel: 60 / 40 mm Drilling capacity in cast iron: 55 mm Morse taper: MK 4 Throat depth: 340 mm Column diameter: 160 mm Quill stroke: 160 mm 3 feed rates: 0.09 / 0.16 / 0.28 mm/rev Table size: 700 x 550 mm Machined base plate: 450 x 600 mm Table adjustment (vertical): 750 mm Table rotation around column: 360° Installation height (lower table to spindle): approx. 1,200 mm Spindle speed range Step 1, infinitely variable: 60–210 or 200–600 rpm Step 2, infinitely variable: 130–400 or 400–1,200 rpm Total drive power: approx. 2.3 or 3 kW – 380 V – 50 Hz Dcsdpfx Aev S Iqcefqer Weight: approx. 750 kg Accessories / Special features • 2-step gearbox and stepless speed adjustment via belt drive, pole-changing motor for 2 speeds • Automatic quill feed with depth stop and shut-off • Equipment such as drill chuck included Condition: good – ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We kindly ask for your order. Additional upright and column drilling machines are always in stock – please inquire with us.

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0625004, Listing 24603 Technical Specifications: - Suitable for welding steel, aluminum, special metals, Cr Ni (chrome-nickel alloys), etc. - Welding current: 450 A at 60% duty cycle; 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control system by FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Intermediate connection set (machine – wire feed case): 10 m - 4-roll continuously adjustable wire feed - MIG/MAG torch package, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg Dcedevncqvepfx Afqsr