Obločno varjenje MIG-MAG v plinski zaščiti

FRONIUS TIME Synergic 450

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0518018, Offer 24600 Technical Specifications: - Suitable for welding steel, aluminium, special metals, CrNi, etc. - Welding current: 450 A 60% duty cycle - 360 A 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit Hnjdpfx Aevncfmegiok - Separate wire feed case - Interconnecting cable set device – wire feed case 14 m - 4-roll wire feed, steplessly adjustable - MIG/MAG welding torch package, water-cooled, approx. 4 m - Earth cable - Pressure reducer - Mobile undercarriage - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Hnjdpfx Agsi Ezx Djiok Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618012, Technical data: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle Hnjdpfsvncubjx Agiek - 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate cable set, device to wire feeder case: 1 m - 4-roller wire feed, steplessly adjustable - MIG/MAG torch, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Connection requirements: 400 V / 6.6 A / 8.7 kVA - Footprint approx.: W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618019, Offer 24589 Technical specifications: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Adjustable welding current: 3 A – 450 A Hnjdpjvnb Tpofx Agiek - FRONIUS synergic control system - FRONIUS water cooling unit - Separate wire feed unit - Intermediate hose package (machine – wire feed unit): approx. 14 m - 4-roll continuously adjustable wire feed - MIG/MAG water-cooled torch package: approx. 4 m - Ground cable - Pressure regulator - Mobile undercarriage - Connection: 400 V / 6.6 A / 8.7 kVA - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 100 h, Specializirani smo za obnovo puhal, kompresorjev in vakuumskih črpalk. Servisiramo opremo proizvajalcev kot so: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Nudimo tudi najem puhal in kompresorjev. Delujemo po vsej Evropi in zunaj nje. Hnjdpjn Tntqofx Agiok

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 145 K, Offer 24018 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling diameter in steel ST 60: 32 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 150 mm - 9 spindle speeds: 104 – 1400 rpm - 2 feeds: 0.1 / 0.2 mm/rev - Throat depth: 290 mm - Maximum distance table to spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and hand crank Hnsdpfx Aeu At Thjgisk - Drive: 400 V / 1.1 / 1.3 kW - Space requirements approx.: W 600 x H 2100 x D 900 mm - Weight approx.: 420 kg - Includes: - Forward/Reverse operation - Coolant system - Keyless drill chuck 1–13 mm - Work light

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna višina: 215 mm, skupna širina: 130 mm, skupna dolžina: 360 mm, skupna masa: 7 kg, trajanje garancije: 12 meseci, vrsta hlajenja: zrak, višina izdelka (maks.): 10 mm, varilni tok pri 60% delovnega cikla: 150 A, varilni tok pri 100% delovnem ciklu: 130 A, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, - Inspected used unit in excellent condition, directly from the manufacturer - - Multiple units available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (incl. gas management, high frequency ignition, and electrode welding function). All-in technology for mains, generator, and battery power - "3 steps and weld" operating concept - Simple single-knob control - Continuously adjustable current - Precise digital ampere display - With graphical user interface on OLED graphic display - Maximum customization thanks to detailed welding cycle control - Job memory for 10 welding tasks Current list price (02/2025): 2,277 € plus VAT Scope of delivery: Unit including detachable mains cable, carrying strap, gas hose, and operating manual THE MicorTIG SERIES. THE POWER PACKS FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional users: The MicorTIG series welding machines from Lorch are the ultimate TIG units for installation work as well as for the workshop – suitable for steel and stainless steel. Whether for production or repair, and whether you have mains power on-site or not: The MicorTIG series improves TIG welding results worldwide – and makes everyday work easier. Quite literally: Weighing only 6.8 kg, you can easily take your Lorch MicorTIG welding unit anywhere – even with accessories in the carry case. Small but powerful: With patented MicorBoost technology, these machines deliver 200 amps from any standard power outlet. INTUITIVE OPERATION. Thanks to the precise digital ampere display and clearly structured control panel, operation is intuitive and highly precise. Optionally available: an operating concept via graphic display. CONTACTLESS HF IGNITION. TIG ignition occurs contactlessly with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, no inclusions are created in the seam and the electrode is preserved. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse functions up to 5 kHz are ideal for working with thin sheet metal. They enable outstanding weld pool control and perfect results, even for demanding welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save parameters for up to 10 welding tasks and quickly retrieve them when needed. Recurring jobs are therefore completed quickly and efficiently. Hnjdovxid Repfx Agisk PERFECT FOR ELECTRODE WELDING. The MicorTIG machines from Lorch are suitable for every type of electrode and offer convenient pre-selection for CEL and standard electrodes. Even special electrodes are no problem. During welding, arc force regulation ensures arc stability and optimum material transfer. The anti-stick system prevents sticking or annealing of the electrode. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE OUTLET. The patented MicorBoost technology provides substantial voltage reserves and controls the TIG arc extremely stably, safely, and precisely – even with fluctuating mains voltage. This enables you to weld with up to 200 amps on a regular power outlet.

Stanje: novo, Grinding range: 2 - 20 mm Point angle min./max.: 90 - 135 degrees Connected load: 230 V Machine weight: approx. 8.6 kg Hnodpfoupxkwox Agisk Space requirement: approx. 0.35 x 0.2 x 0.2 m Packaging dimensions: 340 x 270 x 410 mm Weight: 8.6 kg

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Stružnica za les +++++ Hodpek Sat Dsfx Agionk Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lifting height: 1010 mm Load capacity: 1000 kg Hnedpfx Aefrztxegiek Minimum lifting height: 190 mm Connection voltage: 380 V Total power requirement: 0.75 kW Machine weight: approx. 0.22 t Space requirement: approx. 1.3 x 0.8 x 0.2 m The hydraulic lift tables are electrically driven and operated. They are equipped with a contact strip for safe lowering operations. Widely applicable for workshops, assembly departments, loading bays, etc.