Stroj za rezkanje navojev in stroj za odvalno rezkanje zobnikov

Fritz Heckert ZFWVG 250 x 5000 / S7

Leto izdelave: 1940, stanje: rabljeno, Automatic universal gear hobbing machine for the production of spur gears and worm wheels. Dcjdpfx Aekw T Rmjmiei Maximum hobbing diameter: 120 mm Minimum hobbing diameter: 5 mm Minimum gear module: 0.30 Maximum gear module: 2 mm Maximum hobbing length: 100 mm Supplied complete with all accessories.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 Dcedpfxsyv In Io Amiji WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Originalni CNC (ni predelan iz klasičnega v CNC) Dcodsxyh Hvjpfx Amiji Krmiljenje: Siemens 8-M Premer planske plošče: 3500 mm Maks. stružni premer: 4000 mm Maks. stružna višina: 2500 mm Vertikalni pomik kladiva: 1600 mm Horizontalni pomik kladiva: 2200 mm Presek kladiva: 250 x 210 mm Minimalni notranji premer: 360 mm Vertikalni pomik prečnega sani: 2000 mm/min Moč motorja vpenjalne glave: 71 kW Število obratov vpenjalne glave: do 90 vrt/min (2-stopenjski menjalnik) Nosilnost mize: 40 ton Pomik: 1000 mm/min Hitri pomik: 6000 mm/min

Stanje: dober (rabljeno), Leto izdelave: 1975, Bordirni stroj Schleiffstein - KBmL 3012-300 MACH-ID 9223 Proizvajalec: Schleiffstein Tip: KBmL 3012-300 Leto izdelave: 1975 Oblikovalni valji R30/40/50/60/70/80/90/100 Delujoč pod napetostjo Na voljo so dokumentacijske risbe Maks. obdelovanec: 3000Ø Dodpfxsxcnabs Amisci Maks. debelina pločevine: 12mm Maks. polmer bordiranja: R-300mm Min. obdelovanec: 300 Min. debelina pločevine: 2mm Min. polmer bordiranja: 20mm Delovna hitrost: 0 - 5000mm/min. Moč: 30kW Dolžina: 5000mm Širina: 1600mm Višina: 2800mm Teža: 6000kg

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, Dcjdpfx Amet Hwuceioi " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: rabljeno, Stožerska razdalja min./maks. 0-108 mm Nagibni kot min./maks. 5°/84° Krmilnik GE Fanuc Series 0-GC Delilni premer (razmerje 1:1): 152 mm Delilni premer (razmerje 10:1): 216 mm Premerna razdalja (najfina/groba): 1,3/8,5 Mod. Maks. čelna širina zobnika: 35 mm Območje hitrosti vretena rezila: 41-121 min⁻¹ Območje hitrosti delovnega vretena: 0-33,33 min⁻¹ Teža: 9025 kg Dodpjyh Rmmjfx Amisci Potrebni prostor cca 2707 x 2720 x 2200 mm Oprema/dodatki: - 18 kompletov rezil - Transporter ostružkov - Tehnična dokumentacija

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Modul - maks.: 7 Teža stroja cca: 5 t Premer brusnega polža: 280-350 mm Širina brusnega polža: 84-104 mm Dcjdpfx Ajx Aq Egomisi Min. število zob: 6 Maks. število zob: 600 Največji dovoljeni premer glave: 360 mm Maksimalna teža obdelovanca: 60 kg brez filtra z hladilnikom hidravličnega olja in vračanjem brusilnega olja

Stanje: rabljeno, Leto izdelave: 1996, Dolžina brušenja 1.000 mm Dedpfoxx A Dmjx Amijci Širina brušenja 550 mm Višina obdelovanca 400 mm Pritrdilna površina mize 1.580 x 550 mm Največja obremenitev mize 950 kg Magnetna vpenjalna plošča 1.000 x 550 mm Vzdolžni pomik mize (X-os) 1.200 mm Pomik mize 1 - 30 m/min Vertikalni pomiki: 1 - 300 mm/min os Z 470 mm Prečni pomik 1 - 2.000 mm/min Mere brusilnega koluta 400 x 100 x 127 mm Hitrost vrtenja brusilnega koluta 1.500 - 3.500 min⁻¹ Pogon brusilnega vretena 11,00 kW Skupna potreba po moči 23,00 kW Teža stroja pribl. 7,50 t Potreben prostor pribl. 4,50 x 3,20 x H2,90 m Hladilni sistem z integrirano črpalko v hidravličnem rezervoarju, Odsesavanje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Prodajamo ta stružnica. Priključena, možnost preizkusa. Stroj ima priloženo dodatno opremo. Stružni premer: 2.000 mm. Stružna dolžina: 10.000 mm. Največja masa obdelovanca: 60.000 kg. Premer obdelave: 2.000 mm. Video stroja je možno poslati preko aplikacije WhatsApp. Dodpfx Ajxwmbmsmioci

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 7.950 h, Funkcionalnost: popolnoma funkcionalen, Vertikalni obdelovalni center / Vertikalni stružni stroj Proizvajalec: EMAG Model: VL6 (FANUC) Leto izdelave: 2021 Obratovalne ure: cca. 7950 Skupna teža: 10,5 t Glavno vreteno: 28,5 kW Moč pri 40/100 % ED: 41/28,5 kW Navor pri 40/100 % ED: 491/340 Nm Polna moč pri hitrosti vretena: 800 min⁻¹ Najv. število vrtljajev: 3100 min⁻¹ Premični enoti X, Z Pogonska enota revolverja za gnana orodja (C362) s centralno dovodom hladilne tekočine v orodje Najv. število vrtljajev: 9600 min⁻¹ Polna moč pri 3000 min⁻¹ Navor pri 100 % ED: 33 Nm / 10,4 kW Navor pri 40 % ED: 44 Nm / 13,8 kW Navor pri 10 % ED: 56 Nm / 17,6 kW Držalo za gnana orodja: 12 x BMT65 Skladišče in transportni sistem za obdelovance, transporter tipa O (GO 240") sistem nosilnih prizmov za 10 obdelovancev Višina obdelovanca: maks. 250 mm Teža obdelovanca: maks. 40 kg Set (10 kos) nosilnih prizmov za premer obdelovanca: 150–300 mm Dcedswzwu Ispfx Amiji Zračno pihalo za obdelovanec in vpenjalno pripravo (Pick-Up) Dovod hladilne tekočine: 15 bar Zmogljivost črpalke: cca. 80 l/min pri 15 bar Hladilna enota (6,5 kW, voda-zrak) Dvostranski filter hladilne tekočine, ročno preklopljiv Filtrirna finost: 100 μm, z električnim in mehanskim indikatorjem kontaminacije Transporter odrezkov, verižni tip – odvod zadaj Izvedba s tečajnim trakom: odvod zadaj Višina izmeta odrezkov: 1.100 mm (z integriranim rezervoarjem za hladilno tekočino, kapaciteta cca. 500 l) Izvleček emulzijske meglice: zmogljivost cca. 800 m³/h Izpiralna pištola Merjenje obdelovanca s sondo Pihanje sonde Nadzor trajanja orodja (upravljanje nadomestnih orodij) 3-barvni signalni stolp Hitromenjalna vpenjalna glava SMW autoblok KCNS-N400-128 maks. = 3500 min⁻¹ Set trdih osnovnih čeljusti Set mehkih vršnih čeljusti Programska oprema Navodila za uporabo / Navodila za vzdrževanje