Navpično stružnico

FREMTAS 16FR23

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Hnodpfx Afjxdc Ups Tsg Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, inspection on site possible.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Hjdpfx Aefgyicsf Tjng Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Hnedsfd Abaspfx Af Tjg Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno),

Leto izdelave: 2008, obratovalne ure: 9.750 h, Stanje: rabljeno, M2 GmbH offers you the following machine: - Piling and drilling rig RTG RG 25S - Upper carriage: Sennebogen BS 80 R - Engine: CAT C18, 570 kW - Optional: Vibratory hammer MR 125 V, rotary drive KDK 232 S, double head system DKS 100/200 - Features: Vibratory installation, Kelly drilling, and SOB drilling The machine is in excellent condition and immediately ready for operation. Hedpfjh Tyz Aox Af Tjng

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. Hedefg E Hpepfx Af Tong - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 31 h, 3D Coordinate CNC Measuring Device Profitech Innometrik Advanced in Gantry Design (Demo Unit at Special Price) Open Cable Key Features of Gantry Design: Gantry construction with a low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. Granite guideways ensure consistent thermal, dimensional, torsional, and geometrical stability of the machine. 24 air bearings for smooth movement of all three axes. High dynamics for improved performance—the machine can reach high accelerations, comparable to medium and large CMMs. Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measuring results. Air filters and regulators included. Pneumatic counterbalance system for the Z-axis. Granite table with M10 threaded inserts. Hnodpfsdyah Sox Af Tog Passive vibration isolation pads. Technical Specifications Measuring range: X: 500 mm Y: 600 mm Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 / ISO 10360-4: Volumetric probing deviation: MPEP = 2.2 µm Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (µm) Ambient Conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Available as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration also available)

Leto izdelave: 2006, Stanje: rabljeno, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment System Manufacturer: Sirio-Wire Model: M0209 Number of wires/strands: 12 (6+6) Wire diameter: 1.0 – 5.5 mm; however, even thicker wires have been processed on the system with very satisfactory cleaning results. Year of manufacture: 2006 The system was operated for only around three years before production was relocated to another site. Hjdef Nku Repfx Af Tjng Process: Ultrasonic and electrolytic cleaning in hot bath A detailed description of the process can be found on the manufacturer’s website (siriowire) under 'Ultrasonic and Electrolytic Cleaning.' The system is in good, operational condition and is complete except for the pumps. In the photos, the operator catwalk and the collection tray that the system sits in are missing; these photos will be added shortly. The last three images show systems of this type in operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 1.000 mm, Measuring ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld terminal: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Hnsdedv I Abjpfx Af Teg Probe change system: Renishaw (Price REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Original year of construction: 2014, modernized in 2017 and 2025 Exchange for another CMM possible

Stanje: rabljeno, Technical details: Welding current: 500 A Length: 1200 mm Height: 1260 mm Connection rating: 26.6 kVA Connected load: 100 kW Open-circuit voltage: 65 V Machine weight approx.: 147 kg Machine dimensions: 1.2 x 0.45 x 1.2 m Welding cable with welding torch Hnsdpfx Aewrq Txjf Tjg *